Mylar, white paint, or foil

[FreddyDeeb]

I have gotten differing opinions from everyone I've asked. Most have told me that flat white paint reflects light better than anything else. Some have said that mylar is the way to go. And a few of my friends say that foil is just as good, but make sure you leave the dull side up because it reflects better??? I've already got the main perimeter of my grow room "aluminized" from a previous grow, with the shiny part showing. I cut the grow room nearly in half(it was 12'x9', now a conservative 7'x7') by hanging a shower curtain from the beams in the ceiling, but I don't know if I should spraypaint it white, or cover it with mylar or foil. And would someone clarify if it is better to have the aluminum foil dull side showing or the obvious shiny side showing....

[StonerGrower]

Foil is bad, it creates hot spots in the room. Mylar or white paint is the way to go. They are both good.

[Aabama Phill]

Someone told me those emergence space blankets you get at any place that sells camping supplies work best.

[StonerGrower]

^They work alright.

[brettweir]

I'm using one of those emergency blankets now and they're not great, but they do the trick. There's tiny holes in the blanket from the way it's folded, which doesn't reflect anything. Also, it's super thin and easy to tear. Those folds can also create hotspots, but if you tape it tight enough you'll be fine.

I'm pretty sure mylar has the best reflectivity though. Flat white is close behind.

[FarmN420]

Originally Posted by StonerGrower

Foil is bad, it creates hot spots in the room. Mylar or white paint is the way to go. They are both good.

I think tin foil would be fine and not create hot spots if u could keep it smooth.If were to use a roller and glue it to flat surface say piece of paneling.Roll out excess glue till its nice and smooth.Let dry.Elmers glue would work fine.Then use the panel u made for reflectors.Or am I thinking to hard here,I just did smoke some real good wheel chair weed.Chime in on any thoughts,Thanks

[Andy Botwin]

Freddy-

You were kind enough to offer me some advice about air pumps, so I have a suggestion:

Try Black/White polyvinyl. Sometimes called Panda Film, it is 95% reflective, very versatile, and durable if you opt for the 6mil thickness. Mylar is slightly more reflective, much more difficult to clean, about the same price, and definitely more fragile.

Poly is waterproof and lightproof. The black side keeps light out (and resists algae growth if used in Hydro arrangements), while the white side keeps the light in and together they form a good divider for various grow spaces. On cabinets and walls it is great as a lining and/or a 'door/curtain' for quick access.

I cover my Hydro table with a sheet of it to increase light reflection (which in turn, helps keep reservoir temps cooler than the plants above) and resists algae growth and drying out of the Rockwool grow medium, allowing me to gain better control of plant watering.

I've replied to a similar question in the Grow Forum with similar information. The Black/White poly is a legit option. Worth every nickel IMO.

[FreddyDeeb]

Thanks andy. I was going with 100' mylar at the hydro store, but I spent too much on the light and had to put it back. I've already got the entire outer shell of the room covered in foil from a grow a year or so ago. Pretty sure they have both at HTG, so I just have to build up a bit of cash, make the trip, and then decide which way to go.