Page 1 of 2 12 LastLast
Results 1 to 15 of 28
Like Tree18Likes

Thread: Breeding for Beginners - Create Your Very Own Strain!

  1. #1
    420 Member Medical Marijuana's Avatar
    Join Date
    Mar 2008
    Posts
    0
    Blog Entries
    1

    Breeding for Beginners - Create Your Very Own Strain!

    This Text is not by any means the only breeding path which could be taken but is a good start for the lay persons wishing to have a little play being god/and see if they would like to play mother nature with their Garden.

    A person must learn to be a good grower before they can become a good breeder.

    Step One: Choose a male plant with desirable characteristics. One good way to choose male plants is to rub the stem with your finger. If the plant smells of resin and is pungent it could be a good plant.

    Step Two: One branch of male flowers will supply all the pollen necessary. Strip away the other branches to guard against accidental, random pollination. Isolate the male from females once flowers start to show. Soon pollen sacks will begin to open.

    Step Three: When the pollen pods open, place a clean, paper bag over the branch to collect pollen. Secure the bag at the bottom with a piece of string or a wire tie. Keep the bag over the branch for several days to collect pollen.

    Step Four: When enough pollen has been collected, shake remaining pollen off into the bag. Remove spent branch and bag. This pollen can be "Dried" and saved in the freezer for several months. Moisture and high temperatures degrade and destroy pollen.

    Step five: Ideally, fuzzy white pistils should be ready for fertilization 3 to 4 weeks after the first pistils appear. Cover the selected female branch with the pollen filled bag. Shake the bag.

    NOTE: An alternate method is to use a small paint brush to apply pollen from the bag to the pistils if you want only a few seeds.

    Step Seven: Leave the bag for two or three days, to ensure fertilization. Be careful not to scatter pollen on adjacent sinsemilla crop when removing the bag.

    Step Eight: After fertilization, seeds will be ripe in 3-6 weeks. Harvest seeds when they split open the containing calyx or rattle in the pod.

    Seeds are ready to plant immediately, but all may not germinate. Germination percentage increases when seeds are stored in a cool dry place for one or two months.

    Many variations of this could be done and like i said i want the lay person to be able to read a basic step by step intro guide so.

    Growers can use simple crossing techniques to learn about breeding and work with traits that are fairly easy to change – such as, plant size, fragrance and potency. Even though simple experimentation, it is possible to produce the desirable plants.

    To breed a grower must understand the principles of plant reproduction, heredity and environmental stress. By mastering these principles and simple techniques a grower can make crosses to produce new varieties or strains.

    Cannabis plants inherit their genetic characteristics from their sets of parents. Natural heredity laws define why offspring inherit different traits from the same parents. These laws assist breeders to forecast the number of offspring that stand to inherit a specific trait. Anybody who is serious about breeding has a good background in the laws of heredity. It’s essential.

    All plant cells contains chromosomes, microscopic forms inside cells. Genes occur in pairs within these chromosomes. Chromosomes are building blocks of genes and genes determine the characteristics of cannabis. Every cannabis cell contains two genes (one chromosome) for each characteristic. To illustrate, lets look at sex. Each plant has one male gene and one female gene. Cannabis has 10 pairs of chromosomes which makes a total of 20 chromosomes.

    Diploid plants have the normal set of chromosomes that occur in pairs within the cells.

    Polyploid plants have multiple sets of chromosomes within one cell, instead of having chromosomes in pairs, polyploid plants have chromosomes in groups of three or four.

    Tetraploid plants have groups of four chromosomes per cell. Many breeders have experimented with polyploid and tetraploid plants believing they would produce more potent plants. Polyploids can be induced with applications of colchicine. However colchicine is poisonous and polyploid plants are not more THC-potent, nor do they have any other redeeming qualities.

    When the male and female germ cells join at fertilization, each adds one gene for each characteristic so that the new seed then has two genes for each attribute. The diverse combinations of each parents’ genes determine the traits of the offspring and of future generations.

    Inbreeding establishes a pure breed. A pure breed has consistent chromosomes. That is, the genetic makeup of offspring is relatively uniform. This true or pure breed is necessary so common growth characteristics may be established. If the plants are not a pure breed, it will be impossible to predict the outcome of the hybrid plant. After the 4th to 6th generation of inbreeding, negative characteristics, like low potency, legginess and lack of vigor tend to dominate. Inbreeding is necessary to establish a true breed, but has been shied away from after the strain has been established.

    Inbreeding establishes a stable reference point or plant to start from. The chosen females are bred back (back crossed) with males of the same strain. This will establish a true breed, plants with the same growth characteristics. These plants, of known ancestry and growth characteristics will be used to breed hybrid plants.

    Outbreeding or producing hybrid seed is the practice of crossing two plants from different genetic backgrounds. An F1 (make the 1 in F1 superscript) hybrid is a first generation cross of two true breeding plants. F1 varieties are the most sought after plants available because they grow approximately 25 percent faster and larger than other crosses. This phenomena is known as hybrid vigor.

    The offspring of F1 plants are called F2 and the offspring of F2 plants are called F3 etc. The subsequent generations after F1 do not experience hybrid vigor. F1 hybrids from seed companies must be brought back to true bred plants before they serve as consistent breeding stock.

    NOTE: Most often grower’s do not breed, they cross plants without stabilizing any particular plant, or developing true breeding strains. Once they find a plant they like, they take clones of it and grow it out under lights. Often this is process is confused with breeding. It is much more difficult to select plants, stabilize them into true breeding plants and produce F1 (make the 1 in F1 superscript) hybrids. Often when 10 seeds purchased from a disreputable seed company are planted, the result is 10 plants that all look different, so beware!

    Choosing from a large and varied plant stock, is the key to successful breeding. There is no guarantee for a breeder, planting only a few seeds, that they will grow into vigorous plants, even if the seeds are from excellent stock. The best solution is to grow many strains to have many plants to choose from.

    You can't tell by looking at a plant the exact genes it contains. For instance, a female could have one gene for short stature and one for medium stature, but only medium stature is evident; by looking at the plant you have no way of knowing about the short stature gene. Yet, the gene for short stature is in the cells of the plant and some of the offspring will inherit it, and pass the gene on to their offspring. If enough plants and offspring are inbred, some offspring will be short. By observing enough offspring, a breeder can discern what genes parents have and how they interact.

    Environment and Stress
    Always give plants the absolute most stable environment possible. Stable environment allows plants to follow their genetic traits without interference. Stress plants by altering the environment and genetic characteristics are affected. Some likely characteristics of environmental stress include abnormal flowers and flowering traits. Often rookie breeders turn the lights out for a day or two or leave the lights on too long after a consistent 12 hour light/dark period is maintained and plants produce abnormal flowers – female flowers with male parts, a stigma protruding from a male flower or female flowers bearing male anthers.

    Sex reversal is often result from stressed plants. Sporadic male flowers on a predominately female plant frequently occur on stressed plants. These sexually confused plants are not natural hermaphrodites. They are stressed plants with intersex tendencies manifested as hermaphrodite or monocious plants. Do not confuse these deviations to be a new variety or a hermaphrodite plant. Such plants are the result of stress and not suitable for breeding stock. Had these plants been grown properly, they would be suitable for selective breeding. Stressed plants with hermaphroditic tendencies are generally less potent and low yielding. A person must learn to be a good grower before they can become a good breeder.

    Environmental conditions that provoke sexual deviation include photoperiod fluctuation, marginal light intensity, ultraviolet light, nutrient imbalances, cold temperatures, abscisic acid, giberillic acid, old age and mutilation. The world’s top cannabis breeders are good growers and prefer to use naturally occurring genetic traits of plants rather than inducing environmental stimulus to achieve desired results. Altering a plants sex with environmental characteristics could cause the genetic deviation to be picked up by subsequent generations.

    Favorable characteristics most breeders look for include general vigor, potency, resin content, flower to leaf ratio, large floral clusters, quality of high – long lasting, soaring, sedative – therapeutic effects, taste and aroma, short stature, early maturation, and mold and mite resistance.

    Usually varieties that perform well under artificial lights will also perform well outside or in a glass house under natural sunlight. The converse does not hold true nearly as often. Varieties that perform well outside often prove to be a disappointment when grown under artificial light.

  2. #2
    420 Member of the Month - February 2012 Siscokid's Avatar
    Join Date
    Apr 2009
    Location
    Planet Mars
    Posts
    2,279
    Blog Entries
    1

    Exclamation Re: Breeding for Beginers. Create Your very own strain!

    [QUOTE=Medical Marijuana;615442]
    When the male and female germ cells join at fertilization, each adds one gene for each characteristic so that the new seed then has two genes for each attribute. The diverse combinations of each parents’ genes determine the traits of the offspring and of future generations.

    Inbreeding establishes a pure breed. A pure breed has consistent chromosomes. That is, the genetic makeup of offspring is relatively uniform. This true or pure breed is necessary so common growth characteristics may be established. If the plants are not a pure breed, it will be impossible to predict the outcome of the hybrid plant. After the 4th to 6th generation of inbreeding, negative characteristics, like low potency, legginess and lack of vigor tend to dominate. Inbreeding is necessary to establish a true breed, but has been shied away from after the strain has been established.

    Inbreeding establishes a stable reference point or plant to start from. The chosen females are bred back (back crossed) with males of the same strain. This will establish a true breed, plants with the same growth characteristics. These plants, of known ancestry and growth characteristics will be used to breed hybrid plants.

    Outbreeding or producing hybrid seed is the practice of crossing two plants from different genetic backgrounds. An F1 (make the 1 in F1 superscript) hybrid is a first generation cross of two true breeding plants. F1 varieties are the most sought after plants available because they grow approximately 25 percent faster and larger than other crosses. This phenomena is known as hybrid vigor.

    The offspring of F1 plants are called F2 and the offspring of F2 plants are called F3 etc. The subsequent generations after F1 do not experience hybrid vigor. F1 hybrids from seed companies must be brought back to true bred plants before they serve as consistent breeding stock.

    NOTE: Most often grower’s do not breed, they cross plants without stabilizing any particular plant, or developing true breeding strains. Once they find a plant they like, they take clones of it and grow it out under lights. Often this is process is confused with breeding. It is much more difficult to select plants, stabilize them into true breeding plants and produce F1 (make the 1 in F1 superscript) hybrids. Often when 10 seeds purchased from a disreputable seed company are planted, the result is 10 plants that all look different, so beware!

    Thanks! I needed that.

  3. #3
    T6
    T6 is offline
    420 Member T6's Avatar
    Join Date
    Dec 2009
    Posts
    0

    Re: Breeding for Beginers. Create Your very own strain!

    Well said and complete! Very easy to understand. I have a question come up in some threads about multi gererational clones. Do you think the clones of a clone of a clone will exibit less vigor or other negatives?

  4. #4
    420 Member CocoJoe's Avatar
    Join Date
    Oct 2009
    Location
    Land of Lincoln
    Posts
    2,743

    Re: Breeding for Beginers. Create Your very own strain!

    Quote Originally Posted by MostlyCrazy View Post
    I have a question come up in some threads about multi gererational clones. Do you think the clones of a clone of a clone will exibit less vigor or other negatives?
    Should not change, I have not held a mother, just clones of clones etc.

  5. #5
    T6
    T6 is offline
    420 Member T6's Avatar
    Join Date
    Dec 2009
    Posts
    0

    Re: Breeding for Beginers. Create Your very own strain!

    That was my experience to but didn't know if I was just unobservant or lucky. I di a total of 4 generation of the same plant and really didn't notice much change except in max veg height. Flower them all at 12-14" and sometimes it went to 24" and sometimes it went to 34". I think the fact that almost any grower will get better with experience had something to do with that.

  6. #6
    420 Member Love1Fear's Avatar
    Join Date
    Jan 2010
    Posts
    199

    Re: Breeding for Beginers. Create Your very own strain!

    When do we get the chapter of THC Tomatoes so all non medical License growers can grow pain relief Tomatoes.
    I've heard of the Nicotine Tomato.
    Thx for any comments, questions or reading.

  7. #7
    420 Member of the Month - February 2012 Siscokid's Avatar
    Join Date
    Apr 2009
    Location
    Planet Mars
    Posts
    2,279
    Blog Entries
    1

    Re: Breeding for Beginers. Create Your very own strain!

    Quote Originally Posted by Love1Fear View Post
    When do we get the chapter of THC Tomatoes so all non medical License growers can grow pain relief Tomatoes.
    I've heard of the Nicotine Tomato.
    Thx for any comments, questions or reading.
    HMMM? Tomatoes with THC... I would think Willie Wonka has patented that idea already. lol! I would love to see that someday.

  8. #8
    T6
    T6 is offline
    420 Member T6's Avatar
    Join Date
    Dec 2009
    Posts
    0

    Re: Breeding for Beginers. Create Your very own strain!

    I think Homer Simpson did a tobacco/tomato cross so how hard can it be! LOL!

  9. #9
    420 Member modifyd's Avatar
    Join Date
    Oct 2005
    Location
    minnesota
    Posts
    85

    Re: Breeding for Beginers. Create Your very own strain!

    very well written out. thats some good,useful information.


    and...

    a nicotine tomato?? i dont like tomatoes to begin with but one with nicotine sounds even more intolerable... YUCK
    MARLEY STATUS

  10. #10
    New Member
    Join Date
    Jan 2010
    Posts
    3

    Re: Breeding for Beginers. Create Your very own strain!

    it was called TOMACCOE!

  11. #11
    T6
    T6 is offline
    420 Member T6's Avatar
    Join Date
    Dec 2009
    Posts
    0

    Re: Breeding for Beginers. Create Your very own strain!

    That's it! Thanks.

  12. #12
    420 Member of the Month - February 2012 Siscokid's Avatar
    Join Date
    Apr 2009
    Location
    Planet Mars
    Posts
    2,279
    Blog Entries
    1

    Re: Breeding for Beginers. Create Your very own strain!

    I would love to learn the answer to that too!

  13. #13
    420 Member
    Join Date
    Jun 2010
    Location
    30"x40"x72" closet with a 600w
    Posts
    172

    Re: Breeding for Beginers. Create Your very own strain!

    Who wrote this?would it be alright to ask you a few questions...the poster can't be pm'd.

  14. #14
    420 Member Evolution's Avatar
    Join Date
    Feb 2010
    Posts
    64

    Re: Breeding for Beginers. Create Your very own strain!

    WGT Great Post!

  15. #15
    420 Member art fog's Avatar
    Join Date
    Mar 2011
    Location
    MI
    Posts
    205

    Re: Breeding for Beginers. Create Your very own strain!

    In Outbreeding can you produce a F1 if one of the two plants history is unknown?

Page 1 of 2 12 LastLast