NFT 13' x 11' Multi-Strains

madscientist9

New Member
Lighting 2 - Mars 2 700 LED's stationary and 1 400 watt HPS on light rail
Set Up 2 - 4' Tables with NFT 23 plant system
For canopy control have 3 layers of trellis which will support the plants
Nutrients - Advanced Nutrients
Room Temp; 76 - 78 maintained with a 12000 BTU A.C.
Relative Humidity sets 65% - 80%
Reservoir Temp sets around 66 degrees

Now for the interesting part the plants
10 Kush x Diesel
3 TH Seeds Bubblegum
2 GH White Rhino
2 GH Great White Shark
3 GH Jack Herer
1 Dinafem Industrial Plant
1 Amnesia

DSCN155411.JPG

DSCN155513.JPG

DSCN155614.JPG

DSCN155913.JPG

DSCN155812.JPG

DSCN155710.JPG


The Clone Room
DSCN15365.JPG

DSCN15287.JPG


The Main Room with 4 x 4 Mother Tent
DSCN15618.JPG

DSCN15646.JPG

DSCN15676.JPG

DSCN15668.JPG

DSCN15659.JPG
 
Day 2 of 12/12 obviously no flowers yet, but got everyone topped, lolly poped, and cropped. Will slow their explosion in the two weeks of growth you normally receive when switching to 12-12. However I have grown four of these before and they really don't mind getting toped right before flowering. No popcorn for me only focusing on creating frosty tasty colas. Hung a light proof curtain in the clone room to block any chance of light escaping. Got some more colors of 2" neoprene covers today from amazon which will help to keep everyone organized. Each color represents a different plant. Moving some clones down under the mothers while I finish off the new NFT units switching up to more units with less holes. More like the one I built for my mothers.

DSCN15787.JPG


Overhead Multi Angles
DSCN15808.JPG
DSCN15869.JPG
DSCN15838.JPG
DSCN15857.JPG
DSCN15975.JPG


Side View
DSCN15946.JPG
DSCN15937.JPG
DSCN15958.JPG
DSCN15889.JPG
DSCN15879.JPG



A Few Close Ups
DSCN159012.JPG
DSCN15899.JPG
DSCN15926.JPG
DSCN15926.JPG


Mama Tent Outside and Inside
DSCN16003.JPG
DSCN16012.JPG


Cloner and Rooted Clones
DSCN15985.JPG
DSCN16026.JPG
 
Very nice, by looking at your set up I can tell you have invested a lot of time and work. Hopefully we will soon see a lot of mouth watering buds :yummy:
 
Did full res change bumped up to 1350 ppm with Advanced Nutrients + Rhino Skin + Bud Candy + Syszamine + Voodoo + Bud Igniter + Bud Factor X pretty much the full line for the grand master grow level minus tarantula and piranha.
 
That sounds like a killer formula Madscientist, I would love to have access to all of those nutrients!
Good luck brother.
 
When I grew smaller and wanted to use them I just went to ebay and you can by smaller portions of the nutes and have them shipped discreetly to your door. For me I am of the option garbage in garbage out so why use crap nutes when I can get the best
 
Well six days at 12/12 completed should be about another week till I see some flowers. They are looking great lots of growth this week the canopy is bouncing back nicely after the major trim. I know most prefer not to trim right before flower but with 8 types of bud it makes it easier to keep everyone on an even keel not to mention they only focus their energy on top shelf bud production and no wasted energy making popcorn bud.
DSCN16193.JPG

DSCN16203.JPG

DSCN16214.JPG

DSCN16303.JPG

DSCN16286.JPG

DSCN16294.JPG

DSCN16274.JPG

DSCN16233.JPG

DSCN16256.JPG

DSCN16224.JPG

DSCN16244.JPG

DSCN16266.JPG


Built two smaller units out of the second 23 holer, got some ideas coming up and think this design is going to work really well and can see it pumping out some weight in the near and dear future. Building the screen for these two this week and have a nice idea cant wait to see if it works. Using lots of the parts and pcs I have lying around
DSCN16181.JPG

DSCN16173.JPG



Also been working on tracking how much energy each part of my grow uses to maximize the amount of lighting I can get without creating red flags of energy usage. Had a leaky toilet for a little over a year lol and with it fixed and the amount of water consumption is actually down and that's with the making of a lot of RO/DI water. I must tell you I was surprised with how well the cfl's were working in the clone room for growth. Obviously its no hid or led but does well and keeps it on the cheap. My clone "room" cost me .13 a day 3.70 a month or about 1.2 KWH of electricity a day, and this is 3 cfls + 1 on 5 off water timer for cloner + ph monitor
DSCN15365.JPG

DSCN16315.JPG

DSCN16324.JPG

DSCN16336.JPG

DSCN16344.JPG

DSCN16355.JPG
 
Well 10 days into 12/12 lighting and a few have begun to flower should see flowers on the rest by the end of the week. The canopy is FULL to say the least. Added another 10 in second set-up. Going to work on cleaning up the bottoms this week as there is not really any use for the growth.

The new girls
DSCN16745.JPG

DSCN16755.JPG


The undergrowth
DSCN16917.JPG

DSCN16929.JPG


Day 1
DSCN15838.JPG

Day 14 or first day of flowering
DSCN16846.JPG

DSCN16869.JPG


Day 1
DSCN15946.JPG


Day 14
DSCN16775.JPG


Flowers
DSCN16819.JPG

DSCN16828.JPG
 
Back
Top Bottom