Hey all I have had questions about my cooling method so i thought i would just make a DIY thread.....
Basically I have a periscope type of setup with an 8" inline fan at the bottom and i place this in front of a window so the fan pulls air from outside and blows it into the room. This setup cooled my room 20 degrees, but of course i do not grow indoors in summer!
Hole For Inline Fan:
Fan Inside:
Cover fan up to the bottom of the window:
Fan sticks out front:
Place Vent to Direct Air Flow:
The Whole Picture:
The black screen you see on the duct is a filter of sorts.
I used a worm clamp to attach the duct to the fan.
There is a slot in front for the cord from the fan to come out.
This is 2 feet wide and the window is open 2 feet.
I covered the whole wall/window with a large tarp and pinned it to the wall to make a seal and cover leaks.
The reason the fan is at floor level is because air rises and the hole being low prevents light from outside coming in.
Thats pretty much it... Ask questions, leave comments! Especially If you try it!
Basically I have a periscope type of setup with an 8" inline fan at the bottom and i place this in front of a window so the fan pulls air from outside and blows it into the room. This setup cooled my room 20 degrees, but of course i do not grow indoors in summer!
Hole For Inline Fan:
Fan Inside:
Cover fan up to the bottom of the window:
Fan sticks out front:
Place Vent to Direct Air Flow:
The Whole Picture:
The black screen you see on the duct is a filter of sorts.
I used a worm clamp to attach the duct to the fan.
There is a slot in front for the cord from the fan to come out.
This is 2 feet wide and the window is open 2 feet.
I covered the whole wall/window with a large tarp and pinned it to the wall to make a seal and cover leaks.
The reason the fan is at floor level is because air rises and the hole being low prevents light from outside coming in.
Thats pretty much it... Ask questions, leave comments! Especially If you try it!