420 Magazine Background

Final reduction of RSO

pointer80

Well-Known Member
Hello all, I made some rso using 750 ml. everclear 151 proof and 4 ounces of little popcorn buds. I used a rice cooker but I didn't want to take a chance on burning it so I put it into a little jelly jar before all the liquid was gone. What's the best way to remove the little bit of liquid left? Thanks all.
 

Attachments

Vapeman420

Well-Known Member
You could get a mug warmer/hot plate to bring up the temp to speed up the evaporation process. You don't want your oil going over 120 degrees Fahrenheit so do monitor it carefully!

-Vape
 

VanIslandConnoisseur

Well-Known Member
Hello all, I made some rso using 750 ml. everclear 151 proof and 4 ounces of little popcorn buds. I used a rice cooker but I didn't want to take a chance on burning it so I put it into a little jelly jar before all the liquid was gone. What's the best way to remove the little bit of liquid left? Thanks all.
Hey i make iso oil all the time, once all the air bubbles have popped and no more are forming, this is a good time to transfer like you did for the final evaporation. I like to use the bottom of a pop can cut off, to put the oil on, because it all flows to center making it easy to get a hoot when it gets low and less waste. You can heat up the custom oil tray causing it to gather again in the center. I use a 2" wide drywall scraper to scrape the oil and transfer from the pyrex/casserole dish to the can. Then it sits in the toaster oven at 237°F for about an hr, start at 250°F and once it heats up and starts to boil, turn down to 235-237° the isopropyl/alcahol of choice will be gone once all bubbles have dissapeared, this method works awesome for me. Any micro bubbles on top can be removed with a lighter or torch. Yes, the majority of terpenes are left afterwards. I dont find this too hot like some say. As the oil sits exposed to the air after its done, over time does get better, havent looked into it much, probably decarbs more and possibly more evaporation. So expect it too het even better as you get into it.
20191208_235553-0.jpg
20191208_234757.jpg
20191208_212227.jpg
20191128_225205-0.jpg
20191128_222806.jpg
20191128_220916.jpg
20191128_215655.jpg
20191128_213634.jpg
.
 
Last edited:

Northern Hydro

Well-Known Member
Hello all, I made some rso using 750 ml. everclear 151 proof and 4 ounces of little popcorn buds. I used a rice cooker but I didn't want to take a chance on burning it so I put it into a little jelly jar before all the liquid was gone. What's the best way to remove the little bit of liquid left? Thanks all.
Coffee cup warmer ;)
 
Top Bottom