420 Magazine Background

Grandpa Gets Oily! Everclear Extracts For Shatter Or Oil!

Thread starter #301

Grandpa Tokin

Member of the Month: Apr 2018
I truly appreciate you putting the time and hard work in to write up such a thorough tutorial and over all just being so thorough and helpful to me and all of us on 420, true MOTM stuff haha. You’re top notch GT. You da man wit da plan, .. literally hahaha. Thanks again :green_heart::Namaste:o_Oo_O:cough::ganjamon::ganjamon::ganjamon::19: I’m feelin really good after that dab induced nap I just found myself in haha
Hahaha! That stuff will put you out bud. I have a huge slab of rosin I pressed before the hospital stay. Can’t wait to try it again.
 
Thread starter #302
Thread starter #305

Grandpa Tokin

Member of the Month: Apr 2018
Nice and even and a beautiful color. I do miss your nuts though.
What she said... shed :slide:

I found some clear spacers. Approximately the width of a razor blade. Seems to work well.
 

stoneotter

Well-Known Member
Here’s a few pictures of some older extracts. They are both stable, but you can tell which one was the second wash. Enjoy!







Hey Grampa, hope your well today. I'm reading through your oil/shatter? pages here and am wondering. My wife and I usually use a vape. Do you suppose if I were to break off a piece of this golden wonder and put it in the oil oven of a pax3 would it melt and deliver at 420 degrees f?
 
Thread starter #309

Grandpa Tokin

Member of the Month: Apr 2018
Hey Grampa, hope your well today. I'm reading through your oil/shatter? pages here and am wondering. My wife and I usually use a vape. Do you suppose if I were to break off a piece of this golden wonder and put it in the oil oven of a pax3 would it melt and deliver at 420 degrees f?
I do it all the time brother. I have a Pax3 also and it works like a charm. It does make the “oil oven” piece get pretty messy though. It needs cleaning more often than the weed piece does. But, it works well and the taste is absolutely outstanding.
 
Last edited:

Kingjoe83

Grow Journal of the Month: July 2017
Grandpa made some oil today. I used some fresh frozen trim and it turned out beautiful. Enjoy!










Hmm mind if I ask for recipe or steps so I can try your way tokin ?

That looks easier then my way I’m having trouble with . Will you help me ?
 

stoneotter

Well-Known Member
I do it all the time brother. I have a Pax3 also and it works like a charm. It does make the “oil oven” piece gets pretty messy though. It needs cleaning more often than the weed piece does. But, it works well and the taste is absolutely outstanding.
Oh boy I can't wait! I'll let you know how it come sout. It'll be days or weeks but soon. Thanks brother!
 

TheMadDabber

Member of the Month: Dec 2017 - Nug of the Month: June 2018
Hmm mind if I ask for recipe or steps so I can try your way tokin ?

That looks easier then my way I’m having trouble with . Will you help me ?
The step by step starts on page 1 joe.
:thumb:
 
Thread starter #313

Grandpa Tokin

Member of the Month: Apr 2018
Hmm mind if I ask for recipe or steps so I can try your way tokin ?

That looks easier then my way I’m having trouble with . Will you help me ?
The first post has all the steps bud, but I’ll help you in any way I can. Just let me know. Decarbing is really easy with the shatter/oil. I just put it in a small silicone container and pop it in my little toaster oven at 250F. I watch it closely and when it stops bubbling I know it’s done. Normally it takes about 10 minutes depending on the batch amount, etc.

Let me know how I can help my friend.
 
Thread starter #314

Grandpa Tokin

Member of the Month: Apr 2018
Oh boy I can't wait! I'll let you know how it come sout. It'll be days or weeks but soon. Thanks brother!
In fact, I just got back from a little trip to Yellowstone. I took oil and the pax3. Very little smell (like weed) and easy to travel with.
 
I’ve played with the idea of getting the pax3 .. I’ve only tried cheap vape pens. So have you all been happy with it? I see it works great for the oil. I’m just curious what everyone’s thoughts are on them
 
Thread starter #316

Grandpa Tokin

Member of the Month: Apr 2018
I’ve played with the idea of getting the pax3 .. I’ve only tried cheap vape pens. So have you all been happy with it? I see it works great for the oil. I’m just curious what everyone’s thoughts are on them
I like it for travel and the ease of use with the oil. I also like hitting weed in this thing too. The taste is smooth and very different than smoking. However, I don’t have a lot to compare with since this is my first real vaporizer. At home, I normally hit Dabs at my shop/grow with a dab rig, and keep the pax3 loaded at the house for evenings when I don’t want to walk down to the shop in the dark. My wife doesn’t appreciate the smell of dank-ass weed like I do. I can walk out into my garage, hit the pax3, and be back on the couch before the commercial is over...with very little smell. I will say this however, I’d probably be just as happy with another vaporizer brand as long as it performed similar to the pax3.
 

Kingjoe83

Grow Journal of the Month: July 2017
The first post has all the steps bud, but I’ll help you in any way I can. Just let me know. Decarbing is really easy with the shatter/oil. I just put it in a small silicone container and pop it in my little toaster oven at 250F. I watch it closely and when it stops bubbling I know it’s done. Normally it takes about 10 minutes depending on the batch amount, etc.

Let me know how I can help my friend.
Thanks will go over your opening and see what I can do .
 

Pennywise

Member of the Year: 2017 - Member of the Month: Mar & Oct 2017, Aug 2018 - Plant of the Month: Aug 2017