Skunk #1 - 90 Watt LED Grow

cnnbs

Well-Known Member
hello everyone

equipment:
- seed: skunk #1 feminized (35% Sativa / 65% Indica) sensiseeds, 45-50 days flower
- 90 watt led (metered 60 watts, 45x2W leds, red-blue-orange = 35-5-5, red = 630nm | blue = 460nm | orange = 610 nm) ... 10-20cm lightdistance moving with the plant... i removed the glass from the LED light, because its a bit more brighter without it and installed a noctua 600 rpm fan, also opened the sides of the LED light for a better cooling
- homebox 160x80x80
- 1 prefertilizated jiffy
- soil: biobizz light mix
- fertilizers: biobizz bio-grow (npk 4-3-6), biobizz bio-bloom (npk 2-7-4)
- gronest 11L textil pot
- electronic post packet scale
- airflow through/out of the box with pc fans
- ppm meter
- hygrometer
- thermometer

day 1
... filled a small cup with tap water (ppm 183)
... dropped the seed into the cup
... the seed swims on the water
... placed the cup into the dark
... placed the electronic post packet scale in the box middle
... placed a saucer on the scale middle
... cutted out some holes at the bottom textil pot for a better water intake from the saucer, because only saucerwatering
... filled the 11l textil pot with biobizz light mix soil while knocking the pot on the ground to make the soil denser
... powered on the scale and waited until the scale tared to 0
... the scale will be always on
... placed the pot on the saucer, the pot feels heavy, there must be still alot water saved in the soil
... pot weight: 5,06 kg
... activated the pc fan for airflow through/out of the box 24/7
... after 5 hours i pressed the seed under water
... the seed sunk to the ground of the cup
day_001_seed4.JPG
day_001_seedwater.JPG
day_001_potandscale.JPG


day 2
... after 24 hours the seed has build a small root
... soaked up a prefertilized jiffy with tapwater (ppm 183) and inserted the jiffy without the net into the mid of the pot
... inserted the seed with root pointing down into a small 1cm deep jiffy hole
... jiffy hole slightly closed
... pot weight: 5,12 kg
day_002_roottap.JPG
day_002_jiffy.JPG
day_002_jiffypot.JPG


day 3
... pot weight: 4,93 kg

day 4
... pot weight: 4,83 kg

day 5
... pot weight: 4,74 kg
... she is over the ground
... activated the light 18/6
day_005_overtheground.jpg


day 6
... pot weight: 4,56 kg
day_0063.jpg


day 7
... pot weight: 4,45 kg

day 8
... pot weight: 4,36 kg

day 9
... pot weight: 4,25 kg
day_0093.jpg


day 10
... pot weight: 4,17 kg

day 11
... pot weight: 4,10 kg

day 12
... pot weight: 4,05 kg
day_0121.JPG


day 13
... pot weight: 3,94 kg

day 14
... pot weight: 3,83 kg

day 15
... pot weight: 3,79 kg
day_0154.JPG
 
Interesting seeing how fast the water in your pot was evaporating, almost 90 ml a day! I am currently raising some original Skunk from crop king, and they look a bit different than your variety, check my journal if your interested. Good luck!!
 
How far away is your light from the seedling?

the light will be 10 - 20 cm far away from the plant until end

Interesting seeing how fast the water in your pot was evaporating, almost 90 ml a day!

i should write that the electronic scale does not show sometimes the exact weight. example: if the real weight of the pot is 3,50kg, the display of the scale will show a weight between 3,40kg and 3,60kg or sometimes exactly 3,50kg

good luck everyone
 
day 16
... pot weight: 3,73 kg

day 17
... pot weight: 3,68 kg
... removed the pot and the saucer from the scale
... placed a bigger saucer on the scale
... tared the scale to 0
... placed the pot on the saucer
... filled 1L tapwater with 3ml biobizz grow into the saucer
... ppm: 663 (~200 tapwater ppm included)

day 18
... pot weight: 4,67 kg

day 19
... pot weight: 4,58 kg
... filled 500ml tapwater with 1.5ml biobizz grow into the saucer
... ppm: 660 (~200 tapwater ppm included)

day 20
... pot weight: 4,98 kg
... filled 500ml tapwater with 1.5ml biobizz grow into the saucer
... ppm: 657 (~200 tapwater ppm included)

day 21
... pot weight: 5,34 kg

day 22
... pot weight: 5,18 kg

day 23
... pot weight: 4,97 kg

day 24
... pot weight: 4,77 kg
... filled 1.2L tapwater into the saucer
... ppm: 212

day 25
... pot weight: 5,72 kg

day 26
... pot weight: 5,46 kg

day 27 / day 1 12/12
... pot weight: 5,16 kg
... plant height: 19cm
... 12/12 light

day 28 / day 2 12/12
... pot weight: 4,88 kg

day 29 / day 3 12/12
... pot weight: 4,57 kg
... filled 1L tapwater with 1ml biobizz grow into the saucer
... ppm: 384 (~200 tapwater ppm included)
 
Those gals are looking great! I have original skunk from Crop King, and they are about the same size and age. They look a bit different.

what are the genetics from original skunk? skunk #1 is Afghani x Acapulco Gold x Colombian Gold

Howzit cnnbs - nice setup dude - I'm using same nutes and soil - gonna follow along to see how you smash it.

ill also watching your grow. im still experimentating with the biobizz line so dont expect to much :D

day 30 / day 4 12/12

day 31 / day 5 12/12
... pot weight: 4,55 kg
... filled 1L tapwater with 1ml biobizz grow into the saucer
... ppm: 377 (~200 tapwater ppm included)

day 33 / day 7 12/12

day 34 / day 8 12/12
... pot weight: 4,60 kg
... filled 1L tapwater with 2ml biobizz grow into the saucer
... ppm: 526 (~200 tapwater ppm included)

day 36 / day 10 12/12
 
day 36 / day 10 12/12
... pot weight: 4,50 kg
... filled 1L tapwater with 2ml biobizz grow into the saucer
... ppm: 513 (~200 tapwater ppm included)

day 37 / day 11 12/12
... cutted the 2 lowest branches off, because they were thin/growed slowly/got less light

day 38 / day 12 12/12
... pot weight: 4,59 kg
... filled 1L tapwater with 2ml biobizz grow into the saucer
... ppm: 525 (~200 tapwater ppm included)

day 39 / day 13 12/12
... pot weight: 4,91 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 407 (~200 tapwater ppm included)

day 42 / day 16 12/12
... pot weight: 4,49 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 410 (~200 tapwater ppm included)

day 43 / day 17 12/12
... pot weight: 4,59 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 407 (~200 tapwater ppm included)

day 45 / day 19 12/12
 
Ok, 90 freakin watts? Really? Great job! Im running 600, and my skunk plants are totally different looking ( dense), but wow, 90 watts! :thumb:

the led was sold me as 90 watt led, but metered it has only 60 watts. i guess its the different soil and fertilizers we use that makes our skunks looking different.

day 45 / day 19 12/12
... pot weight: 4,69 kg
... filled 1L tapwater with 3ml biobizz bloom into the saucer
... ppm: 395 (~200 tapwater ppm included)

day 46 / day 20 12/12
... pot weight: 4,62 kg
... filled 1L tapwater with 1ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 481 (~200 tapwater ppm included)

day 48 / day 22 12/12
... pot weight: 4,56 kg
... filled 1L tapwater with 1ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 483 (~200 tapwater ppm included)
... because of space problems i cutted the 2 highest branches down

before

after

day 49 / day 23 12/12
... pot weight: 4,72 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 405 (~200 tapwater ppm included)

day 51 / day 25 12/12
... pot weight: 4,40 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 413 (~200 tapwater ppm included)

day 52 / day 26 12/12
... pot weight: 4,48 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 404 (~200 tapwater ppm included)

day 53 / day 27 12/12
... pot weight: 4,58 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 410 (~200 tapwater ppm included)

day 54 / day 28 12/12
 
day 55 / day 29 12/12
... pot weight: 4,51 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 408 (~200 tapwater ppm included)

day 56 / day 30 12/12
... pot weight: 4,58 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 411 (~200 tapwater ppm included)

day 57 / day 31 12/12

day 58 / day 32 12/12
... pot weight: 4,57 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 406 (~200 tapwater ppm included)

day 59 / day 33 12/12
... pot weight: 4,61 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 406 (~200 tapwater ppm included)

day 60 / day 34 12/12

day 61 / day 35 12/12
... pot weight: 4,51 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 406 (~200 tapwater ppm included)

day 62 / day 36 12/12
... pot weight: 4,50 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 409 (~200 tapwater ppm included)

day 63 / day 37 12/12
 
day 63 / day 37 12/12
... branches getting weak, stabilizated them

day 64 / day 38 12/12
... pot weight: 4,46 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 409 (~200 tapwater ppm included)

day 65 / day 39 12/12
... pot weight: 4,56 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 406 (~200 tapwater ppm included)

day 66 / day 40 12/12

day 67 / day 41 12/12
... pot weight: 4,49 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 418 (~200 tapwater ppm included)

day 68 / day 42 12/12
... pot weight: 4,56 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 404 (~200 tapwater ppm included)

day 69 / day 43 12/12

day 70 / day 44 12/12
... pot weight: 4,41 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 406 (~200 tapwater ppm included)

day 72 / day 46 12/12
... pot weight: 4,37 kg
... filled 1L tapwater with 0.5ml biobizz grow and 2ml biobizz bloom into the saucer
... ppm: 415 (~200 tapwater ppm included)
 
Back
Top Bottom