Winter Is Coming! The Quest For The Iron Throne! A High Brix Quadline Breeding Project!

Day 3

House Tulley (Durban Thunderfuck)

These girls are the largest of the whole gang! They are in this jiffy organic potting soil with no added perlite for drainage. Problem with this medium is that it dries out very quickly. Water goes straight through. I have to water each day a bit around the edges. They are a little droopy today. But that’s par for the course around these parts. Lol. Her roots look the best of all the plants so far. Here they are!


The rest of the kingdom got a bit of water around the edges since they were light. Not the new transplants though. They were still plenty wet. Here they all are.
Greyjoys (Alaska Thunderfuck)

Baratheons (Stankberry)

Lannisters (Black Cherry O’s)

Starks (Pugsbreath)
 
On Saturday (4/20) I'll be dropping a DTF for planting in non-Stank soil, so I'm watching yours closely. Watching Van's is useless for a comparison. :eek:

Excellent roots on that baby!
His is definitely one of my favorites on the forum right now! Big shout out to @Van Stank
 
High Brix Cannabis

I grow in Doc Bud’s High Brix Blend living organic soil. And after just 1 grow season with it, I doubt I ever change!
When we talk about Brix we are actually talking about a refractometer reading that tells us the amount of dissolved solids within a sample of our plant material. The higher the reading the higher the sugars, mineral levels, specific gravity and true protein levels are in the plant. This adds up to sweeter tasting, more minerally-nutritious produce.

There are 4 foundations to growing High Brix Cannabis. This info comes from Doc Bud’s website.

1. Mineralize the Soil
By now, we all know about how corporate farming and sterile soils have ruined our food supply. We all know that organic, living soil is the way to go for healthy, delicious produce. With High-Brix growing, we not only want living soil with organic ingredients as opposed to chemicals, but we want the maximum amount of life from the soil we can possibly get.

Research has shown that a large amount of calcium in the soil, with the right ratio of calcium-to-magnesium and a relatively low amount of organic matter (less than 8%) will allow the microbial life in the soil to thrive.
Think of volcanic soil, full of minerals. Minerals are where it's at--this is what we're after in High-Brix. Our amendments are designed to bring every mineral into the right ratio in the soil, making the microbes hyperactive and happy. Calcium is king here. No other mineral is as important in the soil as calcium and we've yet to find a commercial potting soil with even close to the optimal amount of calcium in it.
Doc Bud’s High-Brix soil is unlike any other super soil, or potting soil out there. We have WAY MORE calcium than they do. First time kit users are often surprised most by how strong their stems are and how little support they need. Thank calcium for that!

2. Microbiology
Rock-based calciforous and phosphate minerals are great, but often not readily available to the plant's roots without mycorrhiza--the symbiotic, beneficial fungi and bacteria that live in the soil. Good products contain specific microbes that will make our herbaceous plants thrive. As in a state of nature, these microbes should be born and raised eating rocks....not molasses, like most other products lazily include! Sugar won't keep your soil heathy any better than a steady diet of sugar will keep your body healthy. Minerals, on the other hand are what the plants need, and they get them via microbial action, or at least they should.
Proper microbes will be happy to break down rocks and feed the byproducts to the plant, which is why any good fertilizer package should include finely ground rock powder. Under the right conditions, microbes act as an army of micro-cultivators that help make nutrients and minerals available to the plant that would otherwise go undigested. Unlocking these soil components is part of what sets High-Brix produce apart, and why High-Brix gardening is massively fixated on the microbial health of the soil.

3. Major and Minor Elements
We're concerned with balance. We need Nitrogetn (N), Phosphorus (P), and Potassium (K) as well as Magnesium (Mg), Sulfur (S), Copper (Cu), Iron (Fe), and several other micronutrients, but to ensure the best produce we need them all in the right balance. For example, we always aim for 18 times more calcium than potassium and the same for phosphorus, and we also always want between 6 and 10 times more calcium than magnesium. Once we get all those down, we then want those trace elements present in the right (trace) amounts. This meticulous fine-tuning, which takes many months of lab testing is the secret behind the effectiveness of Doc Bud's products, and you simply won't find the same thing anywhere else!
It’s common to think that providing a plant with a buffet of everything will result in the plant never lacking in any one thing, but this type of approach only works well in salt based or sterile farming methods. In living soil, we want to maximize microbial action--and having too much salt in the soil decreases this microbial action. Having too much potassium or not enough phosphorus will suppress your microbes as well. So instead of over-abundance of everything, we've found balance is best. We're not worried about feeding the plant because we feed the soil, and let the microbes take care of the plants! They're far better at it than we are.
When everything is balanced and delivered in the right ratios, the plants get everything they could ever wish for and in the most efficient manner possible; via microbial action in the soil. This is how nature designed to plants to grow, and we believe it is unequivocally the best way to grow them.

4. Soil Energy
Sure, most of us are familiar with the idea that our bodies are electric. Would you believe it if we told you soil also carries an electric charge?

Not only can we measure voltage in soil, it turns out that this electric charge plays a crucial role in making plants grow. If the soil goes 'flat', with no measurable voltage, plants will not grow. If on the other hand, the soil is massively over-fertilized and carrying a super high voltage, plants will not grow, they’ll “burn.” However, with proper voltage the plants spring to life and grow like crazy.
Soil energy is increased through
root drenching and foliar feeding

Root drenches directly increase the conductivity in the soil. Depending on the type of ionic charge in a drench, we can stimulate the vegetative or reproductive processes in the plant. An example of this can be seen in two of our drenches: Growth Ionic Drench and Cationic Drench.
Growth Ionic Drench is primarily supplying the Nitrate form of nitrogen, which has a negative ionic charge. When applied to the soil, this product stimulates growth of leaves and stems, bulking up fruits and flowers nicely. At the other end of the spectrum is Cat Drench, short for Cationic root drench. Cat Drench features "cations" or positively charged ions. This positive charge makes the plants grow, but instead of growing leaves and stems, they grow reproductive structures: calyxes, pistils, etc.
When we understand the natural cycle of plant growth we can time the application of these drenches to enhance nature, improve yield, and most of all, improve quality.
Using root drenches is just one way of increasing soil energy. The other way is via Foliar Feeding which is feeding the soil via feeding the leaves. We can look at soil as the engine that grows the plant. However, we must also realize that photosynthesis feeds the soil! In this way, it's good to look at foliar feeding like a turbo charger on that soil engine.
When the soil is dialed in and the microbes are happily chomping away at rocks and delivering them to the plant as food, the plant produces sugars and other compounds in the leaves and sends them down to the roots in the form of Root Exudates. The microbes crave these sweet exudates and will work day and night eating rocks for a sweet hit of that sugar! Even more, the plant customizes root exudates to actually communicate and signal the soil microbes to deliver certain types of nutrition.

By using a properly designed foliar spray (which is itself a dilute nutrient solution), we can increase the plant's ability to photosynthesize more energy from the sun or indoor lighting as the case may be. This increased photosynthesis results in increased root exudates, which increases microbial activity, which increases plant growth/vigor/vegetation/reproduction....which increases photosynthesis, and around and around.
Foliar feeding speeds up a plant’s metabolism, increasing nutrient density, brix readings, plant health, and terpene and essential oil production.

Here is a pic of my Chemdog 91 S1 bred by Humboldt CSI which is an example of a high Brix plant. The shiny leaves are one of the signs we look for!

Evening mr.Magoo my apologies for being late but I've been stuck in trim jail, can't say much for the food but smoke is top notch down here....haha

Thankyou for the above description and break down of what docs kit is about as I've always shied away cause I could never find info about it that I understood so I've never really showed an interest in it but you explained simply and I've a better understanding now so cheers kindly brother... :snowboating:

Also be good to get a refresher on quadding as i ran astray this on this years outdoor quad.....haha looks like a gap toothed mower hit ...
 
Evening mr.Magoo my apologies for being late but I've been stuck in trim jail, can't say much for the food but smoke is top notch down here....haha

Thankyou for the above description and break down of what docs kit is about as I've always shied away cause I could never find info about it that I understood so I've never really showed an interest in it but you explained simply and I've a better understanding now so cheers kindly brother... :snowboating:

Also be good to get a refresher on quadding as i ran astray this on this years outdoor quad.....haha looks like a gap toothed mower hit ...
Welcome Smeegol! Glad you liked bit about high brix. All of that came from doc’s website, which is full of good info and videos. Anyone interested should definitely check it out. It’s a very easy and efficient way to grow, that just happens to produce some of the best tasting weed out there.
Well well well Mr.Magoo your off to a running start

A nerdy question....if I may.
Approximately which week or node do we start with and how will I know if I've done it right?

I just planted a single amnesia seed in order to follow along, I'm about 12 days behind you so I hope I don't mess this up too much hehe.

A Lanister always pays their debts!
Eirohir, welcome! Not a bad question at all. We top just above the 4th node when there is enough to grab and pinch off. I’ve only quadlined one autoflower plant. She did well for being outdoors at the end of the season. Some of the other members of the “quadsquad“ as we have affectionately come to call each other might have a little more insight into training an auto. But to answer your question, we top above the 4th node, remove nodes 1 and 2. Just leaves us with node 3 and 4 to train out in the cross pattern.
 
Day 6
House Baratheon
Stankberry

These girls are from Stank Genetics. An ATF male and a Blueberry female. The ATF used was from some hard to find genetics these days. I believe Van told me it was around 90% Sativa. So that’s gonna put the Stankberry around 50/50 hybrid give or take. Can’t wait to try her out. Here they are. One a bit older. A pic of the roots of the older one also.


Here’s the DTFs

Here’s the ATF’s

The BCO’s

And the Pugsbreath

All of the little ones got a good drink of water tonight, except the smallest 3. You can see they were thirsty. Also can see the fading on the lower leaves of the DTF today. They are in the organic soil with no additives so they are probably wanting some nutrients. May add a bit of cal mag to their next watering. Been a while since I’ve had to do that. Lol. Oh lord......am I gonna have to dust off my ph pen? Well shit!
#spoiledbythekit
 
we top above the 4th node, remove nodes 1 and 2. Just leaves us with node 3 and 4 to train out in the cross pattern
Sounds interesting, immediately I don't understand, which makes the subject very appealing xd.

Looking forward it , perhaps it will make more sense with diagram or photos, it is oh so interesting.

We are basically making all 4 stems, main lines on the same node? That will look pretty slick.
Sweet
 
Back
Top Bottom