How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
Im growing in a wardrobe. Im a newbie first grow. They're in flower now. I built a smaller veg cabinet and Im LST then scrogging. Heres my flower wardrobe
My veg cabinet
You're definitely in the right place for advice. I dont think I would've made it this far if not for this forum
Sent w my Light, Love and Energies
I'm working on my custom cabinet build right now pretty stoked about it what questions do you have and what are your height limitationsSo, the space... it looks like its going to be 18" to 24" deep, and about 36 " wide and the height will be limited by the cabinet.
I'm debating over buying a cabinet - a wardrobe, supplies cabinet, etc... or building my own. I'm leaning towards the latter, just because its in such a weird space. There's a baseboard heater (not in use) that would prevent a ready made cabinet from sitting flush against the wall. So, I think a custom fitted box will be best.
I'll have to figure out some way to cover it, or disguise it so it just looks like a piece of furniture. I don't really want to attach it to the wall..
What fun!
My first cabinet grow I used a 250 watt cfl through full grow just changed spectrum when went into flower they couldn't get very big due to height problems but was so good when they was doneit looks like you are using T5s for flowering and CFL for veg, right?
Yes Different spectrum cfls in the flower house tooit looks like you are using T5s for flowering and CFL for veg, right?
I'm working on my custom cabinet build right now pretty stoked about it what questions do you have and what are your height limitations
cheers yall and remember keep'em frosty
Large dual chamber grow box build
What are u planing on using as ur lighting at 6 feet cause problem I ran into with mine being 5.5 feet or 66inches the actual chamber part is anyways and between a 9inch thick light 600 watt light and 10 inches to keep plants from burning drops me down 19inches total but then when I also take out like 8 inch pot height I loose a total of 27 inches so my plants can only grow max of a little over 3 feetI can build this cabinet to suit, but I guess the highest I'd want to go would be 6 feet.
What are u planing on using as ur lighting at 6 feet cause problem I ran into with mine being 5.5 feet or 66inches the actual chamber part is anyways and between a 9inch thick light 600 watt light and 10 inches to keep plants from burning drops me down 19inches total but then when I also take out like 8 inch pot height I loose a total of 27 inches so my plants can only grow max of a little over 3 feet
cheers yall and remember keep'em frosty
Large dual chamber grow box build
I was thinking of Scrog or just a sog method but I may more room than u each of my chambers are 3 feet deep and 2.5 feet wideYeah, the ages old problem. My plan was to keep them short using a scrog. Spread them out.
I was thinking of Scrog or just a sog method but I may more room than u each of my chambers are 3 feet deep and 2.5 feet wide
cheers yall and remember keep'em frosty
Large dual chamber grow box build
I'm doing pots so I can grow taller plants I'm going to use pro mix cause it actually soiless so close as hydro as I canI'm gonna have a good look at DWC. I'm not sure it will work for such a small space.
I guess my choices are:
flood and drain - needs a reservoir below plants
pots and medium/soil - no reservoir
Hmmmm...not sure
I'm doing pots so I can grow taller plants I'm going to use pro mix cause it actually soiless so close as hydro as I can
cheers yall and remember keep'em frosty
Large dual chamber grow box build
You can use any length u want most us like 18 and 6 or 20 and 4 no u can not clone an auto autos are automatically because they are genetically mixes with ruderalis cannabis strain which flower upon age a clone would still be same age as mother you took it fromSo, I haven't heard anything about my original questions:
Questions:
What day/light length do you use for autos? 12 hours, 18 hours 24?
Can I take and root a clone from an auto plant? Would it still continue to flower as originally planned, or would cutting and cloning it, reset it?
I understand that autos begin to flower at some set age, not based on light day length. Will I have enough time before flowering starts, to scrogg?
I'd be glad to hear from you.
Thanks
You can use any length u want most us like 18 and 6 or 20 and 4........ no u can not clone an auto autos are automatically because they are genetically mixes with ruderalis cannabis strain which flower upon age a clone would still be same age as mother you took it from
cheers yall and remember keep'em frosty
Large dual chamber grow box build