Breaking Brix: Buck's DIYs

Buckshot317

Plant of the Month: Mar 2018
I'm in process of changing a 5x5x8 ft over from hps to cobs. Materials = 10 vero29 v7 4000k, 14 vero29 v7 3500k, passive heatsinks, 6 meanwell drivers hlg 240h c1400b. The drivers and potentiometers will be mounted externally. Here's a couple pics of current grow waiting to finish. As soon as most are done will be hanging the new lights.
420-magazine-mobile709847681.jpg
420-magazine-mobile156077505.jpg
420-magazine-mobile197858586.jpg
 
I've been using hps for a while now, tried a few mars lights, and clw 550. I never could find anything to cover a 5x5, without having 3 or 4 lights hanging, that's reason went with diy. Seems like the veros are the best bang for the dollar. Welcome resinousWood, hopefully this will be a entertaining grow ( hopefully I won't muck it up to bad)
 
Looking back at what your set up is I can't wait to see what happens. What strains are you planning on running Buck? :thumb:

Sour diesel, white cookies, cali og, and bubba kush. The cali and bubba kush are from seed, the others are clones cut from current ones that's about to finish.
 
I had to screw couple 2x4 to wall. When I place control board I will have 3 inches of space between board and wall. I do have some wiring on back of panel.
420-magazine-mobile94823412.jpg
I have 2 20amp receptacles, each being fed by its own 20 amp breaker. Should have plenty of power. After I get light running I am going to build a top feed drop system, so when I'm away for work week or two at a time I won't have to worry about water and nutes.
 
Back
Top Bottom