g3n0c1d321
New Member
Can I cool 2 1000 watt hps lights with 1 240 cfm ducting booster?
Sent from my LGL52VL using 420 Magazine Mobile App
Sent from my LGL52VL using 420 Magazine Mobile App
2x1000 watt cooling tubes
- Thread starter g3n0c1d321
- Start date
The 240 cfm sounds little for 2 1000W hps but I am not a pro I can't give you a real advice but I guess it's not enough but I am not sure!
BSbuds
New Member
Think space and room size when thinking cooling and fan size. Obviously the bigger wattage equals more heat but if you have a room that is less than 240 cubic feet which I'm sure you do, that fan will be fine to clear the warm air as long as you have a fresh supply of cool air coming in as well.
First Journal - Mid Grow
First Journal - Mid Grow
- Thread starter
- #4
g3n0c1d321
New Member
My flower is 5 foot wide and 8 foot long and 6.5 foot high
Sent from my LGL52VL using 420 Magazine Mobile App
Sent from my LGL52VL using 420 Magazine Mobile App
- Thread starter
- #5
g3n0c1d321
New Member
In right at 260 cubic foot
Sent from my LGL52VL using 420 Magazine Mobile App
Sent from my LGL52VL using 420 Magazine Mobile App
BSbuds
New Member
Idk why I said "I'm sure you do" lol as if I'm good at math I was thinking much larger room. Silly. I still think it would work though.
First Journal - Mid Grow
- Thread starter
- #7
g3n0c1d321
New Member
I have plenty of cool air for the fan to pull in to cool lights
Sent from my LGL52VL using 420 Magazine Mobile App
Sent from my LGL52VL using 420 Magazine Mobile App
LEDBud
Well-Known Member
The fan should work well enough depending on duct length and bends etc.
I use a 180 Cfm 13v 2.25A hvac fan to cool two 600 hps with 25 feet of 6 inch flex duct , with five 90 degree bends.
The exhaust air is 100*F with 1200w with the Fan set at 10 volts or 60% speed it starts running @ 7 volts with a max of 13 volts.
And the cooltubes glass stays cool enough to touch
Since a duct fan is made to go inline if you use one plumb it in the middle of both ends so the push and pull are even
I use a 180 Cfm 13v 2.25A hvac fan to cool two 600 hps with 25 feet of 6 inch flex duct , with five 90 degree bends.
The exhaust air is 100*F with 1200w with the Fan set at 10 volts or 60% speed it starts running @ 7 volts with a max of 13 volts.
And the cooltubes glass stays cool enough to touch
Since a duct fan is made to go inline if you use one plumb it in the middle of both ends so the push and pull are even
- Thread starter
- #9
g3n0c1d321
New Member
That's what I was wondering is if I should have the duct booster in middle thank you for the information
Sent from my SM-S902L using 420 Magazine Mobile App
Sent from my SM-S902L using 420 Magazine Mobile App
Similar threads
