Huktonponics
Active Member
Hello 420'ers , my second post here, asi posted the same question elsewhee on the forum on someone else topic but it seems to have gone dead. Been looking around for an active forum discussing DIY COB builds and this one seems to be very informative and active, so kudos !
Anyhow, im going to be taking a plunge into diy'ing me a rig or 2 for my 8' x 4' tent. Currectly running 4 x 315w CMH lights in there in 2 x Raptor Dual Bulb Hoods, 2 x 930 bulbs and 2 x 942 bulbs over 3 plants in a diy RDWC.
What id like to know is, how many of these kits would i need to cover my area if i went full CoB, and how many would i need if i wanted to go COB + 2 x 315w CMH's
4pcs of Original CREE CXB3590 cob ( CXB3590 2700K-6500K top bin )
4pcs of thermal tape
4pcs of Ideal holder 50-2303CR
4pcs of Ideal 50-2300AN
4pcs of KingBrite Reflector KB-D82-90RF
4pcs of Pre-drilled Passive heatsink Φ133*H70mm(for 55-65W)
5pcs of Wago quick connectors
1pcs of Original MW driver HLG-185H-C1400B
1pcs of TOCOS (soldered) 100K linear potentiometer
Also which configuration would be best for coverage, would 1 big rig or 2 smaller ones be better, would adding some CMH be a good idea ?
The COBs would ideally see me through Veg and Flower also.
Thoughts, ideas, suggestions ?
Cheers guy / gals
Hukt
Anyhow, im going to be taking a plunge into diy'ing me a rig or 2 for my 8' x 4' tent. Currectly running 4 x 315w CMH lights in there in 2 x Raptor Dual Bulb Hoods, 2 x 930 bulbs and 2 x 942 bulbs over 3 plants in a diy RDWC.
What id like to know is, how many of these kits would i need to cover my area if i went full CoB, and how many would i need if i wanted to go COB + 2 x 315w CMH's
4pcs of Original CREE CXB3590 cob ( CXB3590 2700K-6500K top bin )
4pcs of thermal tape
4pcs of Ideal holder 50-2303CR
4pcs of Ideal 50-2300AN
4pcs of KingBrite Reflector KB-D82-90RF
4pcs of Pre-drilled Passive heatsink Φ133*H70mm(for 55-65W)
5pcs of Wago quick connectors
1pcs of Original MW driver HLG-185H-C1400B
1pcs of TOCOS (soldered) 100K linear potentiometer
Also which configuration would be best for coverage, would 1 big rig or 2 smaller ones be better, would adding some CMH be a good idea ?
The COBs would ideally see me through Veg and Flower also.
Thoughts, ideas, suggestions ?
Cheers guy / gals
Hukt