Green-collar
New Member
Whats up guys, I just got all the components to my vacuum purge set up, and I thought I would quickly share my method of making what turned out to be some chronic connoisseur grade ear wax...please give give advice or info on how to improve this method.
First off this was about 2oz of blackberry kush trim and shitty pop corn nugs, which yeiled a little less then 2 gs.. I think its because I I run the butane for a short time threw the extractor, I do this so I dont saturate the pyrex pan with overkill butane.
I started my packing my honey bee extractor very tight tight and running about half a can of 5x refined butane threw it into my pyrex pan, evaporated the liquid butane on the stove by putting the pan in a larger pan full of water, whipped it slowly, more of a stir really, whipping fast disturbs the terpenes, effecting taste and smell.
Once I feel the butane had evaporated as much as possible I scrape it on to some Parchment paper and set it in the vacuum chamber and turned on the pump. which is a 2 stage 3 CFM which works great even with a 3 gallon chamber.
The setup, as you can see the pump gets to -29hg
This is as good of a photo I could get when it was expanded into a full muffin.
End product after about 4' 1min vac sessions and 2, 5min sessions just at full vac with the pump going.
Also those are not bubbles but craters the popped butane crated, leaving only a clear milky brown wax.
PLEASE FEEL FREE TO SHARE YOUR OWN SET UP!
First off this was about 2oz of blackberry kush trim and shitty pop corn nugs, which yeiled a little less then 2 gs.. I think its because I I run the butane for a short time threw the extractor, I do this so I dont saturate the pyrex pan with overkill butane.
I started my packing my honey bee extractor very tight tight and running about half a can of 5x refined butane threw it into my pyrex pan, evaporated the liquid butane on the stove by putting the pan in a larger pan full of water, whipped it slowly, more of a stir really, whipping fast disturbs the terpenes, effecting taste and smell.
Once I feel the butane had evaporated as much as possible I scrape it on to some Parchment paper and set it in the vacuum chamber and turned on the pump. which is a 2 stage 3 CFM which works great even with a 3 gallon chamber.
The setup, as you can see the pump gets to -29hg
This is as good of a photo I could get when it was expanded into a full muffin.
End product after about 4' 1min vac sessions and 2, 5min sessions just at full vac with the pump going.
Also those are not bubbles but craters the popped butane crated, leaving only a clear milky brown wax.
PLEASE FEEL FREE TO SHARE YOUR OWN SET UP!