- Thread starter
- #21
The reservoir -
7 gallon tote (Home Depot)
4 disc ultrasonic mist maker (house of hydro)
Three holes cut into lid. Two for the fog and one for the blower.
The fog box -
7 gallon tote
Pvc pipe and elbow
Grommet
5015 12v fan
3D printed adapter
Electrical tape
The box has three identical holes cut into the bottom and I use a blower to force the fog up into the root zone.
The grommet makes a fog tight bulkhead for the PVC and I used electrical tape around the PVC because the printed adapter was a little too big and it was easier to increase the pipe diameter than it would be to remix the printed design.
There is fog leakage between the two totes and I haven't gotten around to figuring out an easy fix.
7 gallon tote (Home Depot)
4 disc ultrasonic mist maker (house of hydro)
Three holes cut into lid. Two for the fog and one for the blower.
The fog box -
7 gallon tote
Pvc pipe and elbow
Grommet
5015 12v fan
3D printed adapter
Electrical tape
The box has three identical holes cut into the bottom and I use a blower to force the fog up into the root zone.
The grommet makes a fog tight bulkhead for the PVC and I used electrical tape around the PVC because the printed adapter was a little too big and it was easier to increase the pipe diameter than it would be to remix the printed design.
There is fog leakage between the two totes and I haven't gotten around to figuring out an easy fix.