Velk Returns Illuminautos Mephisto Coco LED Auto #3 extractor silencer build and ins

Velk;3646423 said:

little up date grow space progress has been slow but steady but well worth it i started off by gutting and clearing the space sanded filled and painted everything white

i got some 2x2 bits of wood cut them down and fitted them.to the ceiling and made some wood supports and bolted to the wall for extra strength i then had to think about ducting i removed the panels above the door frame and cut two 150mm (6inch) holes threw them

i also made a splitter so the intake and out take air flow doesnt take from each other

good ol gorilla glue but not the smokable kind unfortunatley , i then carryed on to insulate and sound proof it with anti vibration strips

then i got a piece of flexy duct and put threw one of the holes i cut and put the panels back and filled the cavity with expanding foam

i got my extractor fan and an old bass box i cut a 6 inch hole in one side and a 10 in the other and cut a a square for its electric box to be able to get to if needed and for the plug

i then taped a protective cover over the filter amd taped around the electric box then filled with expanding foam

then for extra insilation and extra shineyness lol i wraped in wide insolation tape my fan was fairly quiet before but now you cant even hear it its so silent ! and shiney!

i took my shiney box and hung it on some bracing that i out around the frame on the ceiling

then i hung it and extra secured the filter with some gripple wire

im loving my new space im really proud of it even gave it a reflective floor

i will eventually move the box across to sit in the corner but thats for another time all thats left to do is hang the lights to the the
yoyos fit a wire holder so i can finally say its done wooop wooop

Click to expand...