Blackleaf
Unique
Blackleaf's HOW TO guide on hash. Part 2 posted.
This is my guide on how to make, mix and succesfully smoke hash.
1. How do you make hash?
I have seen this question quite alot on this forum, and got the idea to write this guide you now can see
First off, if you have some nugs and want to make hash out of it, don't bother. From 10g of good nug you will only get 1g of excellent hash and 9g's of bad scwag.
What you really need is a tree, harvest it and do as normally with the buds, but do NOT trow away any trimmings or leaves, this will be our hash.
Cut all trimmings and leaves into small bits and pieces and put it in the freezer. This is to make all of that sticky goodness crystalize and make it alot easier to work with. Wait like 24 hours or atleast til it's all frozen.
While you wait we can make our screen.
You need this:
1. 4 planks.
2. A piece of quality silk (should be 10"x10" or bigger).
3. A hammer and some nails.
4. Glue or tape
take the 4 planks and make a square with them, apply the silk screen on one of the sides, it's MUST tight like a 7 year old boy
Should look something like this when done:
[Picture is on it's way]
If you have a weight, that would be awesome right now, weigh those trimmings.
Say, you have 50g of trimmings, then you should get like 5g of excellent hash. But if you like you can make poorer quolity and get more.
Now put one the screen on a table or any smooth surface, the table(or whatever) will be where your future hash to be will land, but you need to make sure the screen does not touch the table. But a dinnerplate or something like that under one of the edges of the screen.
Trow some trimmings onto the screen. Not to much, now start bouncing and rubbing it around until it doesn't feel as sticky anymore. Check the resin, does it have any plant material in it? Then you shook it around to much No worries though, just repeat the proccess until your happy.
If you have that weight i was talking about, weigh the resin. does it weigh about 10-15% of the trimmings?
-Yes = good job! -No, much more = repeat the screening dude. -No, much less = You need to bounce and rub some more
Next step, and now all the hard bits are really over :O
What you need:
1. Cellofan (the wrapping of say, cigarrette packs or cd's).
2. Newspaper.
3. Cellotape.
4. An oven.
5. Something to compress the hash, like that rolling thingy your mom uses when shes baking
Now where going to make a little package of joy.
First take the cellofan wrapping of a cig pack or a cd, do NOT tear it, try and make it look almost like you never even touched it.
Now pack some resin in that wrapping, not to much though, casu your going to need to seal tightly it with some cellotape afterwords.
It should be packed in there kind of hard, but not to hard. You now have a cute little resinpack. But wait!!!
You're not ready yet, pack the package with a little newsprintpaper, a couple of layers should be enough, again seal with cellotape.
Moisten the package with some hot water from the sink, it should be wet but not so wet that the paper falls apart.
Now put the package in the oven, it should be in there for about 10 minutes on 175 deegres celsius or gas mark 3.
Take the package out and lay it on a hard smooth surface, and compress it for a while (Soak package and repeat if you want to.)
Put the package in the fridge untill it has cooled off.
CONGRATULATIONS! You have made some hash, dude!
Parts 2 and 3 will follow.
This is my guide on how to make, mix and succesfully smoke hash.
1. How do you make hash?
I have seen this question quite alot on this forum, and got the idea to write this guide you now can see
First off, if you have some nugs and want to make hash out of it, don't bother. From 10g of good nug you will only get 1g of excellent hash and 9g's of bad scwag.
What you really need is a tree, harvest it and do as normally with the buds, but do NOT trow away any trimmings or leaves, this will be our hash.
Cut all trimmings and leaves into small bits and pieces and put it in the freezer. This is to make all of that sticky goodness crystalize and make it alot easier to work with. Wait like 24 hours or atleast til it's all frozen.
While you wait we can make our screen.
You need this:
1. 4 planks.
2. A piece of quality silk (should be 10"x10" or bigger).
3. A hammer and some nails.
4. Glue or tape
take the 4 planks and make a square with them, apply the silk screen on one of the sides, it's MUST tight like a 7 year old boy
Should look something like this when done:
[Picture is on it's way]
If you have a weight, that would be awesome right now, weigh those trimmings.
Say, you have 50g of trimmings, then you should get like 5g of excellent hash. But if you like you can make poorer quolity and get more.
Now put one the screen on a table or any smooth surface, the table(or whatever) will be where your future hash to be will land, but you need to make sure the screen does not touch the table. But a dinnerplate or something like that under one of the edges of the screen.
Trow some trimmings onto the screen. Not to much, now start bouncing and rubbing it around until it doesn't feel as sticky anymore. Check the resin, does it have any plant material in it? Then you shook it around to much No worries though, just repeat the proccess until your happy.
If you have that weight i was talking about, weigh the resin. does it weigh about 10-15% of the trimmings?
-Yes = good job! -No, much more = repeat the screening dude. -No, much less = You need to bounce and rub some more
Next step, and now all the hard bits are really over :O
What you need:
1. Cellofan (the wrapping of say, cigarrette packs or cd's).
2. Newspaper.
3. Cellotape.
4. An oven.
5. Something to compress the hash, like that rolling thingy your mom uses when shes baking
Now where going to make a little package of joy.
First take the cellofan wrapping of a cig pack or a cd, do NOT tear it, try and make it look almost like you never even touched it.
Now pack some resin in that wrapping, not to much though, casu your going to need to seal tightly it with some cellotape afterwords.
It should be packed in there kind of hard, but not to hard. You now have a cute little resinpack. But wait!!!
You're not ready yet, pack the package with a little newsprintpaper, a couple of layers should be enough, again seal with cellotape.
Moisten the package with some hot water from the sink, it should be wet but not so wet that the paper falls apart.
Now put the package in the oven, it should be in there for about 10 minutes on 175 deegres celsius or gas mark 3.
Take the package out and lay it on a hard smooth surface, and compress it for a while (Soak package and repeat if you want to.)
Put the package in the fridge untill it has cooled off.
CONGRATULATIONS! You have made some hash, dude!
Parts 2 and 3 will follow.