RDWC- P.V.C. Its legos for adults

[madscientist9]

So here is a easy to build quick efficient low maitnece RDWC system. It cost a bit more to do it this way but I like it a bit better then cutting holes in the pipe and the pots are taken directly from the cloner and placed in. All these parts can be bought at your local home DIY stores.

First things first gather up your pvc and your tees the tees are 5 a piece so increases the price but I like it better what can I say. A rubber mallet some pvc primer and glue also if you have a 2' level it helps.

I cut all my connection pieces to 6" so it makes the cutting quick and you don't have to worry about matching anything up.

Step one primer up all the ends you are going to need

Step two build the back line making sure that everything is as level as possible as these are the start of it and as you run lines off these if you are off small at start you will be off big by the end.

Step three glue in a row of connection pieces set in with mallet and place on its side standing up and level on that side as well.

Step four glue in the sanitary tees level and tamp and level

Step five connections

Allow the glue 10 mins to set before going to the next level

 

[Dr Fish]

Looks a lot more like thin film nutrient technique, than DWC...

 

[madscientist9]

You are correct it is NFT I had been smoking recent crop so was fudged up when I wrote it so many abbreviations to keep strait.

 

[PRBloodeyes]

Do you have any new pictures with plants on them?