Uc RDWC Waterfalls Quantum Dot LEDs

Indiva710

Well-Known Member
So I have finally finished my grow room well for now...Since a grow room never really is finished and all....
However veg tent is a 4.5x4.5 that is a 4 site current culture 8gal with 8in net pots...I updated the setup as I have a drain kit I built..There's no hoses on all of the setup...Plus there isn't any elbows on the setup...As I can easily access the entire system for cleaning etc...
Lighting hlg qb 132 v1 x4 3500k for side lights 60 watts ea and hlg qb 288 v2 4000k 120w each
Exhaust Ac infinity t6 vivosun silencer and carbon filter

Bloom setup quick qube 8x4 tent
Hlg 320w xl v1 2850k x4 and x2 meizhi 300w LEDs blurple mainly use the bloom only for after lights out for 20min....
4 site under current rdwc diy setup with waterfalls.. I used 27gal totes..3in pvc...No elbows or hoses...700gph return pump and waterfall 125gph per tote
1/4hp water chiller..55gal top off rez
8in hyperfan and 8in carbon filter...
Using cultured solutions nutes and when I run out of those I'm switching to dry powder bytes...I run sterile too...scrog nets with super cropping is a must have....
 

Attachments

  • PANO_20190715_100717.vr.jpg
    PANO_20190715_100717.vr.jpg
    498.7 KB · Views: 252
  • IMG_20190715_100633.jpg
    IMG_20190715_100633.jpg
    847.2 KB · Views: 365
  • IMG_20190712_194553_01.jpg
    IMG_20190712_194553_01.jpg
    678.1 KB · Views: 258
  • IMG_20190720_123113.jpg
    IMG_20190720_123113.jpg
    775.7 KB · Views: 271
  • IMG_20190720_123105.jpg
    IMG_20190720_123105.jpg
    971.7 KB · Views: 245
  • IMG_20190720_123036.jpg
    IMG_20190720_123036.jpg
    1 MB · Views: 253
  • IMG_20190720_123014.jpg
    IMG_20190720_123014.jpg
    1,016.8 KB · Views: 257
  • IMG_20190720_123007.jpg
    IMG_20190720_123007.jpg
    795.9 KB · Views: 264
  • IMG_20190720_123003.jpg
    IMG_20190720_123003.jpg
    844 KB · Views: 268
  • IMG_20190720_115618.jpg
    IMG_20190720_115618.jpg
    827.8 KB · Views: 255
Cuz I just super cropped and Scrooged my plants that day which I was showing how to scrog the right way....My scrogs have 2 layers as well as the 2nd layer is for bud support Mainly...
And here is 22hours after I super cropped and Scrogged them...Also I transplanted them on Thurs as well.....
 

Attachments

  • IMG_20190721_073720.jpg
    IMG_20190721_073720.jpg
    929.8 KB · Views: 227
  • IMG_20190721_073659.jpg
    IMG_20190721_073659.jpg
    924.4 KB · Views: 233
  • IMG_20190721_073647.jpg
    IMG_20190721_073647.jpg
    918.7 KB · Views: 228
  • IMG_20190721_073634.jpg
    IMG_20190721_073634.jpg
    731 KB · Views: 230
  • IMG_20190720_112059.jpg
    IMG_20190720_112059.jpg
    874.1 KB · Views: 220
  • IMG_20190720_090010.jpg
    IMG_20190720_090010.jpg
    821.4 KB · Views: 246
  • IMG_20190718_173637.jpg
    IMG_20190718_173637.jpg
    495.4 KB · Views: 232
  • IMG_20190718_115111.jpg
    IMG_20190718_115111.jpg
    902.5 KB · Views: 233
  • IMG_20190718_112712.jpg
    IMG_20190718_112712.jpg
    534.4 KB · Views: 237
  • IMG_20190717_145921_01.jpg
    IMG_20190717_145921_01.jpg
    486.5 KB · Views: 221
So I got my new cloner built and up and running and wow I am shocked on how great it's working so far actually as I took clones last night around 4pm and the clones of course was in shock and looke7d dead and this am I checked them at 7am and all but 1 clone is back and happy again like it never happened which is crazy and unbelievable how fast they bounced back as my old cloner it would take days for them to bounce back which was a dwc with top feed superponics setup and my new one is a lpa with 4.5gal it also will be a fogponics cloner as well when it gets here in a few days but will see how it goes they will both be on timers of course too ...
IMG_20190831_073924.jpg
IMG_20190831_073919.jpg
IMG_20190830_201644.jpg
IMG_20190830_201607.jpg
IMG_20190830_201558.jpg
 
Back
Top Bottom