growninnorcal
New Member
Okay, starting from scratch and doing my grown room right. I have a 20 amp breaker which I planned on using for two 1000 watt fixtures 120 volt. I know your suppose to not exceed 80% and on a 20 amp its 1920 watts. Will the 80 watts added on make a diffrence? Please let me know if this is a huge concern that I should be worried about. Their only going to be on 12/12 so it shouldn't be that bad other wise I planned on having one light on for 4 hours then the other would kick on after four hours. Now both would be on together for an additional four hours, then the light that first turned on would shut off after 4 hours. Then the next light would turn off after 4 hours for a combined of 12 hours.
___4_____ ___off_____ | ____4____ _____4_____ | ____off___ ___4____
Please let me know. I really don't trying to be safe on staggered times would make a diffrence. Plus only havin both lights on for four hours would be drastic. Please let me know on your experience. Thanks
___4_____ ___off_____ | ____4____ _____4_____ | ____off___ ___4____
Please let me know. I really don't trying to be safe on staggered times would make a diffrence. Plus only havin both lights on for four hours would be drastic. Please let me know on your experience. Thanks