No need for grommets. This suggests to me you're drilling a hole in some kind or plastic container to, usually, transfer water/nutes from one vessel to another.
I have on hand many, many brand new grommets. Probably going to throw them away. Haven't used them for years.
Drill a hole 1/16" (.21mm) smaller than the tubing you want to use, cut the e end at a 45degree angle, put in hole, pull thru on the inside.
PRESTO! Havent has a leak from this method... ever.
PS> If you have a hole ina bucket that is too big or not wanted any longer.
Get gorilla tape and GOOP or any marine sealant, tape over hole outside and fill in hole on the inside with the sealant.. like new.. drill a better hole this time.
I have on hand many, many brand new grommets. Probably going to throw them away. Haven't used them for years.
Drill a hole 1/16" (.21mm) smaller than the tubing you want to use, cut the e end at a 45degree angle, put in hole, pull thru on the inside.
PRESTO! Havent has a leak from this method... ever.
PS> If you have a hole ina bucket that is too big or not wanted any longer.
Get gorilla tape and GOOP or any marine sealant, tape over hole outside and fill in hole on the inside with the sealant.. like new.. drill a better hole this time.
