MSquared;1375120 said:I follow an unusual approach to the dry/cure.
This is what I do and it has always worked so well for me.
open air from 48 to 60hrs - depends on temp/humidty
seal em up for 12hrs
open air from 24 to 36hrs - depends on temp/humidity
seal em up for 6hrs - with this one I then put a hydrometer in there with them so I can get a good reading on them - I take note at the beging and then again at the end.
open air from 12 to 24hrs depending on last reading from hydrometer
seal em up from 3 to 6hrs to watch humidity if good then leave in jars and burp until humidity becomes stable and then jar them for the rest of their lives which never amounts to much time as they are soooo gooood! LOL
I then like to ultimately let them cure for at least a couple weeks checking on humidity and burping as necessary to keep a stable humidity
so below is what I use as my humidity guidelines:
+70% RH - too wet, needs to sit outside the jar to dry for 12-24 hours, depending.
65-70% RH - the product is almost in the cure zone, if you will. It can be slowly brought to optimum RH by opening the lid for 2-4 hours.
60-65% RH - the stems snap, the product feels a bit sticky, and it is curing
55-60% RH - at this point it can be stored for an extended period (3 months or more) without worrying about mold. The product will continue to cure.
Below 55% RH - the RH is too low for the curing process to take place. The product starts to feel brittle. Once you've hit this point, nothing will make it better. Adding moisture won't restart the curing process; it will just make the product wet. If you measure a RH below 55% don't panic.
I hope this helps some and thanks for stopping by!
Testing out MSquared method on dry/cure and will see how it goes for me. I love experimenting and finding the most effective way. The traditional hang the bud till the stem snap is not as good as it turns out. So, let the journey begin and thanks to MSquared for his thoughts on the subject.
