About pythium (sp?)

signman2007

New Member
Can someone please tell me what the beginning signs of pythium is. Well I guess I should let you know whats going on as well....My leaves are starting to get light green spots on them (not yellow) and then some of those spots show deteriation and some are alrteady holes in the leaves, is this pythium? My water drains out very well but I do notice at the very bottom just outside the bottom of the pot I see water standing and I just chalked it up as the medium still draining a little. Besides the heat quickly evaporates that water so not really standing in puddles of water for any length of time. Please help with my problem as I am in day 20 of flower and my buds look hellasious right now and don't want nothing to harm those babies.....



TIA....SM2007....:peace:
 
Re: ? about pythium (sp?)

I will try and get pics up but my mother board on my comp at home is on its last leg and won't read nothing, hell Im lucky I can surf the net. Anyway I will try and get some up thru work but no gaurantees. My plants look extremly healthy besides these spots on the leaves. You have to look closley to see them because they are just barely a different shade of green. You can see some of the spots that are in the process of becoming a hole has the leaf fiber strands that run across the hole before it becomes a complete hole. This is why I think its a deteriation of some sort. This problem has not effected growth at all .....yet!

My res is at about 65 degrees and my cabinet now that Im using my Agrosun HPS bulb (400watt) the cabinet stays at about 75 degrees during light and 65 at night. No light leakage and a constant fan on them 24/7. I change my water every other week and use a PPM meter to keep the nutes perfect. Although I did not see this problem with my Metal Halide bulb in there. The Agosun bulb seems to be a very blue spectrum as compared to the MH bulb. The Agro bulb burns soooo much cooler as well. Maybe its something to do with photosynthesis??? I will switch back to the MH bulb and see if it clears or will the switching of the bulbs be a bad thing. I put the HPS in at about 15 days into flower so its been in about 5 days now. I am noticing my buds getting thicker tho...:cheesygrinsmiley:

Just wanting to nip this in the bud before its gets bad if it is a bad thing. This is my first Hydro grow and its just going so well!


Thanks guys for the help!

SM2007....:peace:
 
Re: ? about pythium (sp?)

Pythium Root Rot

While root rot can be caused by several different species of the fungus-like organism Pythium, the three most commonly encountered species are Pythium irregulare, Pythium aphanidermatum, and Pythium ultimum. P. ultimum and P. irregulare are often found in field soil, sand, pond and stream water and their sediments, and dead roots of previous crops. P irregulare has been isolated from almost every type of greenhouse crop grown but P. aphanidermatum seems to be associated primarily with poinsettia and very few other crops. Pythium can be in commercially available soilless potting mixes. It is easily introduced into pasteurized soil or soilless mixes by using dirty tools, dirty pots or flats, walking on or allowing pets to walk on the mixes and by dumping the mixes on benches or potting shed floors that have not been thoroughly cleaned. Fungus gnat and shorefly activity may also be involved in moving Pythium from place to place in greenhouses. When introduced into a soil mix that has been heat treated for too long or at too high a temperature, Pythium can cause severe root rot because it has few competitors to check its activity. P. aphanidermatum and P. irregulare pose a threat to crops grown in ebb and flow systems because they form a swimming spore stage that can move in water. This is likely to occur only if irrigation times are long (45 minutes or longer) or if pots sit in puddles of water because the bench or floor does not drain completely. If Pythium infests a cutting bed or if contaminated water is used in propagation, large losses occur. Pythium ultimum is primarily associated with soil and sand. As growers switched to soilless mixes, this species became less important than when growers used field soil in the potting mix. P. ultimum does not form the swimming spore stage but can be a problem in ebb and flow systems if the reservoir becomes fouled with potting mix and plant debris particles harboring it. Almost all plants are susceptible to Pythium root rot. Root tips, very important in taking up nutrients and water, are attacked and killed first. Pythium also can rot the base of cuttings.

Symptoms

* Plants are stunted.
* Root tips are brown and dead.
* Plants wilt at midday and may recover at night.
* Plants yellow and die.
* Brown tissue on the outer portion of the root easily pulls off leaving a bare strand of vascular tissue exposed.
* The cells of roots contain round, microscopic, thick-walled spores.

Management

Pythium root rot is difficult to control once rot has begun. Every effort should be directed toward preventing the disease before it begins by using heat-pasteurized potting mix (entire pile heated to 180 degrees F and held at that temperature for 30 minutes. Longer times and higher temperatures will kill beneficial organism in the soil.). Cover the treated soil and store it or commercial soilless mixes in an area that will not be contaminated through the introduction of nontreated soil.

If pond or stream water is used for irrigation, be certain the intake pipe is well above the bottom so that sediment is not drawn in. If the water supply is suspected of being a source of Pythium, it may be necessary to treat the water before use. First, contact the author (see address above) to arrange to have the water tested for Pythium. Slow sand filtration has been shown to be an effective, simple, and inexpensive method for removing Pythium from water. Heat, ultraviolet light, ozonation, and chlorination can also be effective but are expensive and require some training to be used properly.

Cover ebb and flow system reservoirs to prevent contaminated debris from entering the system. Pass return water over a coarse screen to remove potting soil and plant debris in order to help keep Pythium out of the reservoir.

Disinfect all bench surfaces, potting benches, tools, and equipment that will contact the potting mix. Periodically, thoroughly clean and disinfect ebb and flow reservoirs, benches, and flood and drain floors.

In a greenhouse operation with a history of Pythium root rot, apply a fungicide or a biological control agent as early in the cropping cycle as possible. Biological agents should be applied to the potting mix before, during or immediately after transplant. They can even be applied to plants in plug trays before transplanting. Do not apply any chemical pesticides to the potting mix 10 days before or for 10 days after applying the biological control agent. Biological control agents and fungicides may have to be applied more than once in order to maintain adequate protection.

Some populations of Pythium have resistance to metalaxyl, mefenoxam, and/or propamocarb. If these chemicals do not appear to be protecting your plants, switch to another product and contact the author of this fact sheet for assistance in assessing the cause of the problem.

The following biological agents and chemicals are registered for controlling Pythium. Be certain the crop to be treated is listed on the product label before treating the crop.

Chemical Controls

Common name Trade name
etridiazole Truban, Terrazole
etridiazole + thiophanate methyl Banrot
fosetyl-Al Aliette
mefenoxam Subdue Maxx
metalaxyl Subdue
propamocarb Banol

Biological Controls

Genus Trade name
Gliocladium SoilGard
Trichoderma PlantShield, Bio-Trek, RootShield
Bacillus Companion
Streptomyces Mycostop
 
Re: ? about pythium (sp?)

All your info sounds right on man. check out Mooses section in the guide on nutrient lockout. The leaf you are explaining may resemble the one he has posted. The light green may mean they are locked out and needing a dose of N in the mix and they cant draw it in. Double check your ph meter to make sure its working properly.

I use the rapid test PH meter for my water and I think it is more tuned for only soil so in addition I use the PH strips and all test are the same which is about right at 6.8 to 7.0 on ph. I took a look at the thread Moose wrote and did not see anything there that resembles my problem so I will try and get pics up as soon as I can....thanks! :peace:
 
Re: ? about pythium (sp?)

Read this

Pythium

Pythium is a recurring problem for all horticulture and it has been of particular significance in the Hydroponic systems now used for production of lettuce and tomatoes. From our observations it seems to be an increasing problem and we hear the symptoms described quite regularly. If this is the case it may be due to the increased use of re-circulating systems or, more worryingly, to the emergence of stronger strains of the fungus which are more resistant to the normal prophylactics that have been used by commercial growers to date. It does also seem, from our phone calls, that hobby growers are encountering this problem more in recent months, although if this is so it will be difficult to advance any specific reason for it.

Pythium is a waterborne fungus and re-circulating Hydroponic systems provide it with an ideal environment in which to live and breed. Plants can survive and grow with high levels of inoculum in the nutrient solution. The fungus however will restrict the root system. A sudden rise in temperature will find the plants unable to increase their uptake of water and they will wilt. For many growers this is the first sign that Pythium is active in their system.

What is Pythium?
Pythium root rot can be caused by several different species of the fungus Pythium. There is also a number of similar pathogenic organisms that can attack the roots of plants in Hydroponic system. For the horticulturalist and for the purposes of this brief article, the term Pythium is used generically, to describe fungal organisms of the Pythium family and others that behave in a similar way. These fungi are common in field soils, sand or sediment of surface water supplies, and dead roots of previous crops. Pythium is easily introduced into Hydroponic systems by using dirty tools, by introducing infected plant material, or, most commonly, by way of the raw water supply. When introduced into re-circulating Hydroponic system such as Flood & Drain or NFT, Pythium can cause severe root rot because it has few competitors to check its activity. It can procreate easily in the warm conditions and transmit its spores very quickly throughout the system.

Almost all commercial crops are susceptible to Pythium root rot. When a plant is attacked by the colonising fungal spores, the root tips, which are very important in taking up nutrients and water, can be damaged and eventually killed. Pythium can also rot the base of unrooted cuttings and attack small seedlings, the condition known as “damping off”.

The Hydroponic grower can encounter Pythium at any time and if he is unprepared he may well lose his crop. The fight against fungal root disease is ongoing and the careful grower will have it in mind from the day he starts to plan his system.

There are three avenues for the grower to explore in the battle against root rot disease. The first step, as in so many things is prevention. By maintaining a clean growing environment and by treating the incoming raw water the grower can minimise the opportunities for fungal infection to enter the system. The second area of interest is in the optimisation of system design. A well-designed system will be an unattractive environment for fungal spores to develop in and this represents the most important defence against them. Finally we will need to look at the various prophylactics on offer in terms of tank additives and treatments designed to eliminate pathogenic organisms from the actual operational system.
Symptoms: Recognize the enemy
Hydroponic growers may well have at least one advantage over traditional ones as Pythium infection tends to show up in the roots before it has much effect on the upper part of the plant. Hydroponic growers usually see much more of their root system than conventional growers and are thus more likely to have some warning of the problem. This is especially true with NFT systems, as the roots are so visible and accessible. Roots that are subject to infection from Pythium or related fungal pathogens will begin to change from white to a light tan colour. The roots will tend to lose their glossy appearance and become a dull brown in colour. Progressively the root mat turns browner and the roots will eventually soften and break up. It may be found that the brown tissue on the root surface can be pulled away exposing the stronger vascular tissue beneath. It will be a normal part of good management to check the root mat in an NFT system on a daily basis.

The condition of the roots can be a first indicator of other problems in the system as well as a warning of fungal problems. With a good microscope it will be quite possible to see the thick walled Pythium spores in the root cells. Not every Hydroponic system allows access to the root mat and Pythium may be harder to detect in RockWool systems or in Perlite. Here is a list of symptoms that have been reported in connection with Pythium infection. • Plants exhibit stunted growth. Leaves tend to curl downwards and become marked with necrotic spots.
• Root tips are brown and dead. Further browning and softening of the roots will follow.
• Plants wilt at mid-day and may recover at night. This is a common symptom associated with root problems in Hydroponic systems.
• Plants yellow and die. This is also, unfortunately a symptom of many other problems.


If a pathogen problem is suspected it will be possible to get confirmation by sending samples to a good diagnostic laboratory. They will require a sample of the damaged root tissue and possibly of the nutrient solution as well. However if you do not wish to use a laboratory then it will be possible to buy a test kit and do a bio-assay in the comfort of your own home.

Test kits are now available to make identification of fungal problems much easier. The ALERT kits from The Scottish Agricultural College are based on a reliable serological procedure known as Enzyme-Linked Immuno Sorbent Assay. This is a very similar process to that used in pregnancy test kits and the AIDS test. Tests can be performed on any part of the plant and can be accurate enough to detect pathogen-specific protein concentrations as low as 10-100 mg/ml. That is to say the kits can detect 1% diseased tissue in 99% healthy tissue with 95% accuracy. The ALERT kits are available in the UK from Glasgrow Hydroponics Tel: 0141 5527522.
Cleanliness and sterilization
Prevention in this case is certainly better than cure. Pythium root rot is difficult to control once damage to the root mat is visible. Every effort should be directed toward preventing the disease before it begins. Prevention begins with a policy of total cleanliness. It must be remembered that in the greenhouse or grow-room the debris from past crops can remain dry and free from weathering and thus escape the chemical, physical and biological degradation that occurs in the open air. Virtually all crop disease organisms can survive in plant debris for months or years in a dry state, even in invisible dust on the floor. Organisms can also survive on tools, pots, implements such as meters, culture trays and clothing. Hygiene is therefore a primal requirement for overall disease control.

The entire growing area should be kept clean at all times. Dead leaves should always be removed from the plant and destroyed. Keep all soils and composts out of the Hydroponic grow-room or greenhouse. Do not convert plants from soil into Hydroponic systems. Do not enter growing area with outdoor footwear on. Do not bring any plant material in from outside if you can avoid it.

Sterilize all pots, gullies, trays and tanks between crops. Nutrient tanks should be kept scrupulously clean. Do not allow soil or plant material to fall into tanks at any time. Keep tanks covered except for airflow requirements.

Disinfect all surfaces, tools, and equipment that will contact the plants or the nutrient solution. Sterilize the entire system between crops.

Until fairly recently, horticultural sterilisation was mainly carried out using Calcium Hypochlorite. This is the active agent in household bleach and is also widely used in swimming pools. Hypochlorite can be circulated through the entire system between crops. Effective concentration would be around 100-200 ppm and it should be circulated around the system for at least four hours. Hypochlorite is an effective sterilant but it is also very phyto-toxic in concentration so there needs to be plenty of flushing and rinsing of the system before re-planting.

Remember here that the water used for flushing must also be pre-treated or the pathogens can just be re-introduced to the system. Growers who have skimped on this step have lived to regret it as residual chlorine has caused many a crop failure in the early stages. For this reason Hypochlorite has to some extent been supplanted by horticultural preparations containing Hydrogen Peroxide H202. This chemical is highly oxidative and for the reason is as efficient a sterilant as Hypochlorite. It should be flushed through the system at a concentration of around 500-ppm. The attractive feature of Peroxide however is that it rapidly breaks down and the extra labour cost of flushing or rinsing the system can be avoided. The grower would simply allow a couple of days for the compound to break down before introducing plants into the system. Another effective sterilant is Formaldehyde but this is an unpleasant liquid to handle and, like Hypochlorite, it can leave a toxic residue in the re-circulating system.

There are now products on the market that are designed specifically to sterilise plant and equipment in horticultural situations. One such product is Antec Internationals broad-spectrum disinfectant Virkon which has shown a promising capacity to destroy infective organisms without leaving any dangerous residues.

Once the system is thoroughly disinfected it can be replanted. Nothing should be introduced at this stage that could be a possible source of re-infection. Recognised Hydroponic media such as RockWool, Perlite and expanded clay (LECA) are sterile when shipped but be sure to check that they are stored properly and not allowed to come into contact with potential sources of pathogens. These media can be re-used but only when they have been thoroughly sterilised. Perlite and clay can be soaked in a chlorine solution or in H2O2 and then thoroughly rinsed before use. RockWool is difficult to sterilise and commercial growers find that steaming is the most effective method. Hobby growers are usually advised against re-cycling RockWool at any time. The water supply.

Once the grower has a clean sterile system and non-infected plants it should be possible to maintain a disease free environment. However many growers have been undone by not paying sufficient attention to the water supply. It has generally been accepted that town water supplies are free of infection because they have been treated with Chlorine. Some authorities however have begun to question whether the level of chlorination is adequate, as fungal organisms may become resistant to low levels. While town water is usually considered safe water from dams, rivers or bores is likely to contain bacteria and the free swimming zoospores of pathogenic fungi and should certainly be treated before use in Hydroponic system. There are a number of treatments available, none of them entirely satisfactory. Some of these treatments are suitable only for the raw water as it comes into the system. Filtration for example would remove nutrient ions from the solution if it were incorporated into the crop system. Most of these options however can be applied to the circulating nutrient as well as to the inlet water. This offers the advantage of both stopping most pathogens from entering the system and then collecting those that do in a secondary process.
Chlorination
Water can be held in a tank and chlorinated before being used in the Hydroponic system. Calcium Hypochlorite should be added in quantities to yield 10-20ppm Chlorine and mixed thoroughly before being allowed to stand until chlorine content has dropped to zero. Cheap kits to test chlorine levels are available from swimming pool supply shops. If using a Chlorine test kit be sure to use the DPD type and not the OTO type. This method is pretty effective but it can be inconvenient for the grower to have an extra tank of water standing around. If the raw water is treated in this way you can be pretty certain that it will reach the system in an abiotic state. Chlorine can also be added to the nutrient tank as an operational routine (see below).
Hydrogen Peroxide H202
Hydrogen Peroxide is widely used as a tank additive and is sold in the Hydroponic industry under a variety of trade names such as Oxy-Plus. It would certainly be useful as a treatment for raw water and should be added at around 500ppm and allowed to stand for a couple of days before use. Like Chlorine it can be added to the nutrient tank on a regular basis and this would seem to be an attractive option for the grower. The breakdown of H2O2 in solution will release free Oxygen ions, which will circulate in the system and are very much available to the plant. In recent years this has become a very widely used tank additive and is considered valuable as a cleansing and oxygenating agent, much used by commercial growers.
Filtration
The raw water can be passed through 5-micron filter units, which will remove most, but not all, pathogens. Filters are expensive and will require regular maintenance or they will cease to function efficiently.
Ultra Violet
The raw water can be passed through special tubes in which it is bathed in UV light. UV is highly efficient at killing pathogens and, provided that exposure times are adequate, it will be quite an effective way of treating the inlet water. However the requirement for adequate exposure has a limiting effect on the flow rates and it can be quite a slow process if there are large tanks to be filled. Perhaps the UV option has more utility as a nutrient tank treatment, see below.
Slow Sand filtration
This is an efficient and low cost way of treating the inlet water but it will be unsuitable for the hobby or small commercial grower. In this system the inlet water is passed through a bed of fine sand and as it passes downwards it forms a filter skin on the surface of the bed. This skin is the key to the success of slow sand filtration as it is home to a wide variety of biologically active micro-organisms, which break down the organic matter.
System design
A well-designed Hydroponic system will be a less attractive environment for fungal organisms and it is in system design that the grower builds his most effective protection against pathogens. The key to successful design is in the nutrient tank and in the passage of solution around the system. Fungal pathogens seem to thrive in warm stagnant nutrient solutions so the primary requirement of design is to move the nutrient around quickly and to keep the oxygen levels as high as possible.
The Main Tank
Nutrient tank should be as large as possible. Commercial NFT system often have very large tanks but they are servicing large numbers of plants and the ratio is sometimes as low as 1 Litre per plant. The main problem with this situation is that liquid uptake through the day will be a large proportion of the tank and as the raw water comes in to replenish it there will be large variations in pH. Commercial growers will tend to use automatic controllers for pH so this is not a real problem but for the small grower it will be safer to use a proportionally larger tank. In a large tank, say 5 Litres per plant for example; the variations in pH will be slower and much less dramatic. A stable pH is very important, as extreme fluctuations have been shown to cause physical damage to the root mat, which can then provide an entry point for fungal pathogens to attack the plant.

Fig 1

The nutrient tank should be well aerated and the dissolved oxygen content of the solution should be as high as possible. The most effective way to introduce Oxygen into the tank is by dissolving it at the surface. The surface level of the water is called the meniscus and it has been demonstrated that about 90% of the dissolved oxygen, known as DO, in a system is introduced at this point. Contrary to popular belief, air-stones and bubble devices attached to air pumps are not very effective at all, in fact the only way in which they really add oxygen to the tank is by causing disruption of the surface layer allowing dissolution of free oxygen from the atmosphere. The bubbles themselves are too small and too inhibited by surface tension to release significant amounts of oxygen into the solution. The Hydroponic grower can get far more agitation of the surface layer, and thus a much greater Oxygen gain, by using his existing pumping capacity. The main requirement is a decent sized pump that has at least twice the required capacity. Excess pump capacity can then be used in a bypass, see fig 1. This bypass layout has many advantages for the grower. It allows him to turn of one tap B, shutting off supply to the plants. All the pump capacity will now be directed through the bypass causing considerable agitation in the tank. Now is the time to add nutrient concentrate and to check and correct pH. These jobs will be quick and easy as there is no nutrient in the system and the mixing is quickly performed inside the tank. Once the solution is correct the tap can be opened to send it out to the plants once more. It is usual to keep the tap to the plants wide open and then close down the bypass tap A until flow rate through the system is correct. This should leave plenty of flow through the bypass and a churning tank. If this does not happen we would suggest a bigger pump. To increase the agitation of the tank surface the return pipe should be situated well above the level so that it falls back in. This may be somewhat noisy but it will certainly improve the dissolution of oxygen at the surface level. Note that the bypass should be situated just above the pump. This will ensure that the pump is drawing water with the maximum possible Oxygen load.

Once there is adequate movement on the tank surface it is important to consider the air movement in the area. If the tank is sealed, or has a lid, there will be inadequate fresh air at the interface and thus no oxygen gain. Plant roots give off various compounds during the growing cycle, most commonly gases of the ethylene family which are heavier than air and which can flow down the gullies and collect in the tank. If the tank is sealed then the agitated nutrient could be dissolving ethylene rather than oxygen. This could possibly contribute to the kind of anaerobic environment favoured by Pythium and other pathogens. It is very important to keep the tank uncovered, or only partially covered and make sure that there is adequate provision for air movement across the surface.
A small fan blowing across the top of the tank, or through an opening in the lid will be a very good idea indeed. Fresh air blowing across a highly agitated surface will be far more useful in terms of Oxygen than air stones could ever be.

We can now assume that the nutrient in the tank is holding as much oxygen as is possible for the conditions. If the grower is unsure about this it will be possible to purchase a DO meter to check the system. It will be especially instructive to compare DO readings in the tank with those obtained from the return supply. Remember as temperature rises so the capacity to carry oxygen is reduced. In our opinion nutrient tanks should not be heated under normal circumstances. There have been many attempts to demonstrate an advantage to a heated solution but the best results, in terms of improved growth or yield, have been pretty marginal. For the small grower it is possibly better to maintain a reasonable temperature in the growing area and keep the nutrient relatively cool to maximise DO potential. Obviously it should not be allowed to get to cold and a temperature between 18 and 22 0C will be ideal. Once the richly aerated solution leaves the tank it begins to lose its oxygen and it is a fundamental of system design to get that nutrient back into the main tank as quickly as possible. Thus the layout should try to make the journey as short and as quick as possible. This means that gullies or growing trays should not be too long. It also must seek to avoid any dams or areas of puddling or anything that holds up the progress of the nutrient solution. If nutrient solution forms puddles in the root area it will quickly become depleted of oxygen and root die-back can result. An early solution to this problem was the insertion of a fibrous spreader mat so that roots could grow laterally without concentrating on the root-gully interface. Unfortunately most of the materials tested have proved too porous, allowing roots to continue growing along the bottom of the interface. For this reason the use of spreader mat in NFT system is not really to be recommended. It is not really used anymore to encourage lateral root growth but rather to cover up bad system design, to spread the nutrient across a tray or channel, when really this requirement should be an integral part of the channel design.

Soggy wet fabric will not in itself cause fungal problems but if Pythium spores are introduced into the system it may well prove a suitable habitation for them. A far better design would include a false bottom or collecting gully to allow the swift, unhindered passage of nutrient beneath the root mat. This fast moving solution will allow for adequate oxygen exchange beneath the roots and ensure that a large portion of the total solution will be returned to the tank in the shortest possible time. The careful grower will compare DO readings in the tank with those obtained from the return pipe and the fine tune the system to reduce the shortfall. This may mean a different layout or improved trays or gulleys. In any case it will be a fundamental requirement in the fight against Pythium as well as in the optimisation of plant performance and yield improvement.
Tank additives and nutrient treatments
Despite the best efforts of the grower to start with a sterile system and the best system design there will eventually come a time when an infective presence is detected within the crop. The final resort will come from a range of treatments designed for the nutrient tank and supply system. In most cases there is a suggested level for the attempted elimination of an existing problem followed by a treatment at lower levels, designed to discourage re-infection.
Chlorine
Chlorine has the capacity to eliminate all pathogenic organisms from the nutrient tank. Unfortunately the levels required to achieve this are also inherently phyto-toxic and over-enthusiastic addition of Chlorine can actually do as much damage as Pythium and its colleagues. However plant root cells have a much lower surface area to volume ratio than fungal spores and are protected by the root sheath. Thus they are likely to survive higher levels of chlorination than the pathogenic organisms, such as bacteria, virii and fungal spores, that the grower is trying to eliminate. This simple, and very welcome, reality is the basis of most prophylactic treatments.

If it is necessary to treat affected plants within a system then chlorine can be added to the nutrient tank at a rate of 2ppm and this level can be reduced as soon as symptoms of pathogenic damage disappear. A swimming pool chlorine kit can be used to monitor levels. Once the system is clean then a level of just .5ppm (point five) Chlorine will probably be sufficient to maintain it thereafter. A simple calculation will determine the amount of Hypochlorite that will be added to achieve these levels but a meter or test kit will be essential to check the exact situation. Remember when sourcing a Chlorine test kit be sure to get the DPD type and not the OTO type. In our experience the calculated amount of Hypochlorite will be used up immediately by reaction with organic matter, including Pythium spores hopefully, within the nutrient solution. The grower will be advised to use his meter to measure Chlorine levels at the point of outflow from the system. It is likely that the initial dose will not register on the meter by the time it has passed through the system and more will need to be added until the meter registers the desired amount at the outflow. At this point it is very likely that roots will have been damaged somewhat by the chlorine, especially on the plants at the top ends of the gulleys or trays. It will be necessary to reduce the treatment levels now or serious crop losses could result. As time goes by it will be found that less and less needs to be added to achieve the desired levels. This will indicate that organic materials have been largely eliminated as active agents and a maintenance level of just .5ppm should be adequate to maintain the system in a reasonably abiotic state.

When using chlorine in an active system it will be necessary to carefully monitor the roots. If they are being damaged by the Chlorine they may exhibit a shiny brown discolouration. This should indicate that chlorine levels have been slightly too high which will hopefully mean that pathogens have been killed off. If chlorination is discontinued then new healthy roots will usually appear. A maintenance level of Chlorine can then be employed to maintain a clean and disease free system.
Wetting Agent
There are various wetting agents on the market under a variety of trade names. Some, but not all, of them are based on a specific active ingredient called Alkyl phenol ethylene oxide condensate at 60 g/L. It has been proven to have a limiting effect on fungal zoospores in their motile state. This means that it can slow down the reproduction of Pythium within the nutrient matrix but it will not eliminate the fungus. It is used extensively by lettuce growers in Australia where the warm environment has made Pythium species the number one enemy. Wetting Agent is non- toxic to plant roots and can be added to the tank on a weekly basis without any problems. It should not be added at the same time as Hypochlorite but it can be used as a routine prophylactic after the initial infection has been treated with Chlorine. If the two agents were alternated it might be possible to keep the fungal organisms under control without any significant risk of long-term root damage.

A wetting agent under trade name of Agral is registered in New South Wales as a tank additive for food crops, which makes it a member of a very exclusive club.

Recommended dosage is 5 mls per 1,000 litres of tank volume, however many growers have reported using it at much higher concentrations. It is unlikely to be phyto-toxic until very high levels are reached. This product would seem to be the ideal prophylactic and the careful grower might consider it as a routine additive to be used throughout the life of the crop, regardless of whether Pythium was actually in evidence.
Hydrogen Peroxide H202
Hydrogen peroxide is a chemical, which is fundamental to life itself, participating in all the metabolic processes in plants and animals. When added to the nutrient tank it will quickly break down into pure water, releasing the extra Oxygen atom into the solution where it can be taken up by the roots in much the same way as nutrient ions.

This is an extremely unstable and oxidative chemical. It will certainly have the capacity to neutralise infective organisms within the nutrient solution. Unfortunately there has been little work done to corroborate this and the grower will have to make his own decisions about dosage rates.

From personal experience we would say that levels up to 100ppm can be maintained in the tank without risk to the plants. This would be inimical to the entry of most plant pathogens but may not be high enough to control a well-established population. As with chlorine, it may be possible to increase the dosage to the point that root damage occurs and then reduce the levels, allowing new healthy roots to appear. However the grower is advised to be very cautious with high levels of H2O2 in the system. In theory peroxide will do everything that chlorine does, with the added advantage of releasing Oxygen into the nutrient solution as it breaks down. Unfortunately there has been much less experimental work done with this material so there are less clearly defined guidelines available.
Resiclean
There are products on the market that claim to stabilise H202 and make it more effective by prolonging its period of activity. Resiclean is a product that combines peroxide with formic acid to produce compounds more stable than pure H202. This is a promising approach and these products will surely be more widely used in the future.
Fungicides
There is always interest in the concept of systemic fungicides that can be added to the nutrient tank and taken up by the roots. Obviously there is a huge future for the development of environmentally friendly agents that could protect plants against disease from within. There has been some research in this area but there still seem to be few fungicides being registered for use with food crops, let alone as a nutrient additive. In fact we cannot find any fungicide that is actually registered as an additive to nutrient solutions. There is a lot of interest amongst growers in the concept of a simple solution to the complex problems of Pythium and other fungal diseases but if you are a grower of food crops then you must be aware that you have an enormous responsibility to your customers and to the whole industry. If you are thinking of adding anything, other than Chlorine, H202 or wetting agent to the tank as a pesticide or fungicides then please think again.

In many countries it is a CRIMINAL offense to use horticultural chemicals other than in the manner and for the purpose for which each chemical is registered.

Penny Dunstan presented a paper to the 1993 Australian Hydroponics Conference, which looked at the use of Ridomol, (active ingredient, Metalaxyl) in an NFT system growing lettuce. The outcome for that particular chemical was that the lettuces took up the Metalaxyl, which was at 12 to 15 ppm in the nutrient solution, and left residues in the leaf at between 5 to 33 mg/kg. The MRL (maximum residue limit) for Metalaxyl in Australia for lettuces is just 0.3 mg/kg. Thus the simple act of adding a fungicide to the tank allowed the active ingredient to concentrate in leaf tissue at one hundred times the legal limit.

There has been some other work done (not published) which seems to confirm that chemicals which have a systemic mode of action will be rapidly absorbed by the plant from the nutrient solution, and concentrated to much higher levels in the tissue. There are a great many unknowns in this area, and at the moment the chemical companies are not interested in doing any work to get usage of chemicals defined and approved in nutrient solutions. As Hydroponic production of various crops increases, this situation will change, but for the moment it is not an option that should be considered by producers of food crops, whatever the scale of their operation.

There is a big difference between mineral salts used in plant nutrition and chemicals designed to destroy fungi or kill insects and applied as an external spray to a crop.

We have all experienced the well meaning but uninformed response to Hydroponic produce, usually expressed as “it is grown with ‘chemicals’ and is therefore ‘not natural’” To a layman Calcium Nitrate is a ‘chemical’ while garden manure is not. It is difficult to explain to people that plants take up elements and that Calcium is Calcium regardless of its source. In the public mind there is an unfortunate association between Hydroponics and chemicals and the association is a negative one.

This prejudice is being gradually overcome and in many places Hydroponic produce now commands a premium price. If careless growers start adding systemic fungicides and pesticides to their nutrient tank then sooner or later someone will get sick and all the good work will be undone. This will lend enormous weight to the “chemicals are bad” school and all growers will be implicated. The Hydroponic industry does not need any bad publicity relating to chemicals in any shape or form.

Hobby growers should only add pesticides and other chemicals to their solutions if they are prepared to run the risk of poisoning themselves and their family and friends who are likely to eat the produce.
Pasteurization
Commercial growers in Holland are using a semi-recirculating system which allows them to collect all the nutrient in a single large stainless steel tank, typically 20 - 50,000 Litres, and heat it to around 95oC. This temperature is maintained for a few minutes, which is long enough to kill any organism that might be residing in the solution. Solution is then cooled before being re-introduced into the system. This kind of technology is highly effective but is suitable only for the very largest installations.
Ultra Violet
Research has demonstrated that exposure to high levels of UVc, minimum dosage 2,500 Jm-2, especially when coupled with pre-filtration of the water, can be highly effective against many viruses, fungal spores and phytopathogenic bacteria. The attractive feature of the UV process is that it can be incorporated into the system to control the growth and spread of pathogens as the nutrient circulates. Several researchers have commented on the fact that UV has a tendency to precipitate Iron (Fe) out of the solution so the grower who uses UV within the system will be well advised to keep a check on Iron levels by regular analysis and top up as necessary. It is important to be aware that this treatment may well kill the free-swimming zoospores as they pass through but may have no effect at all on the infective organisms within the root mat. Thus it may impede the spread and reproduction of the fungus without really getting to the root of the problem.
Ozone
There is a lot of interest now in the idea of applying raw Ozone 03 to the nutrient. Ozone is extremely reactive and will attack any organic materials it encounters. It is, for this reason, a very promising agent for treatment of the nutrient solution. It may well be the best option for the hobby grower, as small Ozone generators are now becoming available at very low cost. They have the added potential advantage of removing pathogens and bad odours from the atmosphere. It seems likely that small Ozone generators will find increasing favour with small growers over the next few years.

gHydroponic cultivation is all about controlling the parameters that are set by nature. As we learn more about the way plants behave we can optimise their environment and the growing system to achieve ever improving plant performance and higher yields. There are many enemies out there and root diseases are some of the most serious of them but thankfully the optimisation of Hydroponic systems will render them ever less friendly to pathogenic organisms. The ultimate answer to the problems caused by Pythium lies in attention to cleanliness and in system design rather than the use of strong chemicals in the nutrient solution.
 
Re: ? about pythium (sp?)

It has progressed to some of the spots being yellow with a hole there as well.The leaves look just like the first picture of the PH lockout pics in Moose's plant problem thread. Its due for a full water change tomorrow so I will try that and see what happens. Now with me being at 16 days into flower I am using the Flora series nutes and at this stage I'm using 1tsp of the Flora-gro, 2tsp of Flora-micro, and 3tsp of Flora-bloom per gallon of water with a PPM of 1200-1400 consistant. What can I add with these nutes for better bud production? Don't worry I have some really good pics I just have to wait till Monday to load them.



Thanks for all the help! :peace:
 
Back
Top Bottom