Skywalker OG Mainline Scrog

H20gro

Well-Known Member
I have a couple of grows going but will focus this journal on 2 skywalker og fem plants i got from 420.

Both seeds (bought 10, germd 2) sprouted in about 36-48 hours after soaking one night and paper towel next night. I believe that was xmas day that i began soak.

Once germinated they went into 24 hr low led lighting in small net pots w hydroton. Placed those two into a larger net pot and put anout 3-4 gallons h2o in 5 gallon bucket w airstone and nutes at 650ppm.

Once they started growing a bit they went into their own buckets and under slightly brighter led light.

Today is day 2 since topping both for mainlining. Keeping tds at about 650ppm for now and ph at 5.8. Plant “A” has a stronger root system showing and was more bushy/compact before topping than plant “B”.

Iim using general hydroponics 3 part flora plus calmag w RO water (hydrologic stealth 150).

Their veg light is a marshydro ts3000. 18/6 hours. The flower light will be spiderfarmer se5000.
5 gallon dwc w hydroton

3A6D137A-AC09-401A-B63A-B659B0DE445F.jpeg


BAB4FCAF-401A-45AF-AF28-8DF68595727E.jpeg


BB24BA11-F79A-4F30-937E-9C8C691B9312.jpeg


234AA0E4-6DEF-402C-9B14-9F5CACD3FA5E.jpeg


C3C85D61-30FE-4D64-9F07-D2C866D0BA2F.jpeg


259ED4F9-0F24-492E-911F-60210E088FE1.jpeg


84CA0AD5-E78A-439E-A921-A13873E33A7C.jpeg


19B31A37-E5DA-4085-9302-E528D33AE95D.jpeg


AD4D8C49-9D07-4089-B3FE-180DBB70F39D.jpeg
 
Topped them a couple of days ago. Now im seeing something that needs addressing.. in the pics below you can see (i think) some deficiency…. Ive added calmag bc i was using it sparingly but in the meantime… any guesses or suggestions

Pics 1 and 3 are plant a. Pic 2 is b

@Bill284 @Delps8 @OGpapa @Peat Phreak

36C17082-504D-4E3B-9D51-FDE6E4F7E3E6.png


8A1DD3B9-C31C-4A69-BFB3-D223774C8AFD.png


1727DF55-E5F0-4387-8D05-2E70D725ABFE.png
 
Topped them a couple of days ago. Now im seeing something that needs addressing.. in the pics below you can see (i think) some deficiency…. Ive added calmag bc i was using it sparingly but in the meantime… any guesses or suggestions

Pics 1 and 3 are plant a. Pic 2 is b

@Bill284 @Delps8 @OGpapa @Peat Phreak

36C17082-504D-4E3B-9D51-FDE6E4F7E3E6.png


8A1DD3B9-C31C-4A69-BFB3-D223774C8AFD.png


1727DF55-E5F0-4387-8D05-2E70D725ABFE.png
Looks like a typical calmag def.
Why were you not putting in the proper amount? :Namaste:
Put it in your plain water first " if possible " .
According to the schedule.
Are you have issues with your ppm's?




#VIVOSUN Love What You Grow
Bill284 😎
 
Looks like a typical calmag def.
Why were you not putting in the proper amount? :Namaste:
Put it in your plain water first " if possible " .
According to the schedule.
Are you have issues with your ppm's?




#VIVOSUN Love What You Grow
Bill284 😎
Legit question…. Id been on tap for years. Just went to ro. Knew i needed to use calmag but went w about 1/2 dose.. essentially id mix for a gallon,, ppm too high. Id add water and not increase calmag. So, even though im cutting 3 part dosage, i probably need to keep at 1 ml per liter of water is my guess… especially if that is a calmag deficiency. Although its a running joke to add calmag, im guessing it could be the issue. Thank you @Bill284
 
Looks like a typical calmag def.
Why were you not putting in the proper amount? :Namaste:
Put it in your plain water first " if possible " .
According to the schedule.
Are you have issues with your ppm's?




#VIVOSUN Love What You Grow
Bill284 😎
I didnt see the lower oart of your post.. i use ro only. Add calmag first then micro gro bloom in that order. In the past, ive always gone with the GH bottle “3-2-1…1-2-3” dosages. So in veg 15 ml of gro, 10 of micro and 5 of bloom then 2-2-2 transition and flowering was 15 of bloom, 10 micro and 5ml of gro

Now, im follwing another of their online charts w aggressive/medium/light feed and am using the light which is essentially 1-1-1, ie 5ml of each plus calmag

As i mentioned, id mix in a gallon and pom was too high so id dilute w more ro water. But not add calmag…
 
I didnt see the lower oart of your post.. i use ro only. Add calmag first then micro gro bloom in that order. In the past, ive always gone with the GH bottle “3-2-1…1-2-3” dosages. So in veg 15 ml of gro, 10 of micro and 5 of bloom then 2-2-2 transition and flowering was 15 of bloom, 10 micro and 5ml of gro

Now, im follwing another of their online charts w aggressive/medium/light feed and am using the light which is essentially 1-1-1, ie 5ml of each plus calmag

As i mentioned, id mix in a gallon and pom was too high so id dilute w more ro water. But not add calmag…
I understand.
She should bounce back pretty quickly in Hydro. :thumb:




#VIVOSUN #Love What You Grow
Bill284 😎
 
I just realized i cannot edit older posts and it seems someone else edited my first post on this journal. The seeds are from 420. No clue what “420” is doing in that post.

If i cannot mention 420 site, i apologize.
Ok. So, if i try to type the site from which i got the seeds, it automatically edits to “420”. Interesting. Either way i love growing cannabis
 
Ok. Im likely not going to wind up “mainlining” these plants. Ive topped one of them twice and the other just once. Ive been trimming. a lot below net and fan leaves. Taking too long to get going so just gonna let em go now while trimming more than i normally do. Will still try to shape and minimize larfy stuff but… im not very patient nor am i very comfy w my miagi bonsai skills. I expect to switch to 12/12 in 2-3 weeks.

8C7DE2C5-BA93-4EE6-8AB8-3D37579942BC.jpeg


7535A304-366D-42B6-915C-7EA1992FCDBB.jpeg


C6E99C79-AE81-4EDC-B9F2-8E551EEB5140.jpeg


6A39E48D-D9B8-432A-9CF0-1B74A0715590.jpeg


FC663AD9-003A-4C7E-A383-01D212034312.jpeg


3E163D37-D9A3-43D1-8635-DC7959CD0E04.jpeg


F72E4EA0-777C-4CF8-BD0C-66CA133B0080.jpeg


C13DAE25-B19C-44E2-957B-0206C193CABD.jpeg
 
Back
Top Bottom