kram rollen
Active Member
Humidity or temperature during drying. Surprising I’m having an easier time controlling humidity than my temps in a grow tent.
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
Kinda figured that RH was more important, but have never seen what to do with temperature. ThanksRH for sure ....temp is a fine tuning tool. If RH in your space was high, you would increase temp...vice versa...but if you can control RH then no need to mess with temp.
The trick is to not over dry them....because you want them to cure @ 60-65% RH.
RH for sure ....temp is a fine tuning tool. If RH in your space was high, you would increase temp...vice versa...but if you can control RH then no need to mess with temp.
The trick is to not over dry them....because you want them to cure @ 60-65% RH.
RH for sure ....temp is a fine tuning tool. If RH in your space was high, you would increase temp...vice versa...but if you can control RH then no need to mess with temp.
The trick is to not over dry them....because you want them to cure @ 60-65% RH.
[/QUOTE
The cooler it is sometimes it takes longer to dry. Usually it does but there are exceptions.
Room temps or slightly cooler say down to 60F and you will be ok.
Its when its cool and the RH jumps up, thats a problem for drying weeds.
I've been able to keep temps at about 67F and humidity at 50%. I'm into my forth day and the buds seem dry, but the stems don't break just bend. When I pull a small bud off it rips a string off the stem. I think a little more drying time before cure. I just don't want to screw this part up. Thanks for your help.The cooler it is sometimes it takes longer to dry. Usually it does but there are exceptions.
Room temps or slightly cooler say down to 60F and you will be ok.
Its when its cool and the RH jumps up, thats a problem for drying weeds.
I’m gonna try the Boveda packs @62%Temp means if it dries a little faster or slower. Too high RH can mean mold. After losing several curing batches to mold RH is the main thing you wanna keep an eye on.
Boost offers similar for less $I’m gonna try the Boveda packs @62%
Since I got some of those Boveda packs I haven't had a problem with mold. Lost 2 or 3 batches before the Boveda, haven't lost any since then. They've been a life saver. Or weed saver.I’m gonna try the Boveda packs @62%
Answer is "depends"...as in RH of the buds day they went into the jar, density of buds, etc. If they are close to 62% going into the jar then there should be no risk of mold...but watch them for 3-4 weeks just in caseif I cure with a 62% Boveda, how long would I need to cure it before being able to take the Boveda out and only open it once a month or two without it molding