THC Bomb - DWC - LED

Nutria

New Member
Yo
After an unlucky first try I corrected some things and so I restarted!

Strain info:
  • strain: THC Bomb.
  • seed bank: Bomb seeds.
  • genetic: mix.
  • # plants: 1.

Setup:
  • growbox: cabinet 60cmx40cmx100cm (2x1,3x4ft).
  • light: Mars-Hydro 300w led (5w chip) modded with aftermarket fan to lower the noise.
  • medium: Expanded clay, single bucket (10l - 2,6 gal) dwc system.
  • nutrients: GHE floraduo (grow+bloom+ripen).
  • fans: (outtake) 1x inline fan 10cm (4") - 1x small usb fan
 
Day 12
After a slow start it has begun to grow, when roots popped out and touched the water it definitely speeded up!
I tried to lower the light for a day but then I spotted some grey on a leaf' tips (img 3&5).
IMG_20160215_200731.jpg
IMG_20160215_200759.jpg
IMG_20160215_200902.jpg
IMG_20160215_200826.jpg
IMG_20160215_200837.jpg
 
I've found that it happens in cold temps and if you see it early and maintain a cool environment the plant will continue on with purple hues but I'd temps go up the purps on these let's call them not purple strain plants the purpose goes with the higher temps
 
I've found that it happens in cold temps and if you see it early and maintain a cool environment the plant will continue on with purple hues but I'd temps go up the purps on these let's call them not purple strain plants the purpose goes with the higher temps

i know it's related to cold temps but I thought it could happen only during flowering stage. Btw with lights off temp goes down to 62/64f
 
today I spotted some problems on the older leaves, what's that? light burn? nutrients problem?
please give me some advices! ph, ec are the same
thc41.jpg
thc31.jpg
thc12.jpg
IMG_20160215_200837.jpg

thc21.jpg
 
Water has been changed:
0,4 gal tap water (250ppm)
1,2 gal RO water
Then added:
+12ml floraduo grow (5-0-5)
+4ml floraduo bloom (1-5-3)
+2.5ml mag
+2.5ml cal

PH 6.1
750ppm (keep in mind i used some tap water)

QUESTION TIME !!!
1. I have red some people complaining about this FloraDuo due to its lack of Cal, how much should I add? I am following instructions on the bottle but do you guys can suggest me any way to calculate how much to add?
2. I know dwc water should be between 1500 and 1800ppm, so, is mine too much low?

*next time I have to keep track of water tds before adding nutes
 
btw expect for this
IMG_20160223_154508.jpg


the tiny plant is growin well
IMG_20160223_154630.jpg
IMG_20160223_154702.jpg
IMG_20160223_154714.jpg
IMG_20160223_154728.jpg
IMG_20160223_154743.jpg


When should I top it? next internode maybe?
it is wet cause I used a spray
 
Little update

plant has grown 6 nodes and has been topped above the 3rd, cropped a bit and now I am waiting for the 4th node on each branch to create a mainlining

IMG_20160305_184250.jpg
IMG_20160305_184210.jpg
IMG_20160305_183956.jpg
IMG_20160305_183854.jpg


Here are some problems maybe
def_2_.jpg
def7.jpg
 
700 ppm might be too high for a plant that size , I'd half it , quarter it even , I'm no expert tho , only on my 2nd grow

Rly dont know... Btw I will flush with ro water and see.
It could also be burning due to high rh or water spray on leaves..
 
Extra light during flower? Very good idea indeed. Now you got me thinking when would be the best time to add them. My guess is before the flip, once you start getting preflowers. To give her the feeling that summer started and the days are getting hotter and sunnier. I'd put them on the sides to get to those lower branches that are harder for the led to reach. But wait for a more experienced opinion before you go listening to me. Just in case
 
Back
Top Bottom