Perpetual micro cab maybe 760 watts

[MRXC]

hello everybody

at the moment i am still running a grow will take a few weeks. but after that i would like to build a new box
i would like to know what you all think of this planning.

and pleas sent me comments about what you would change to make it work better

as you can see i made some IRONcad drawings but left the doors of for now its more the planning on airflow

so please let me know what you think about it... and if any body ever needs a drawing like this or a work drawing to start carpenting just PM me

 

[Amadeus Forzin]

Love it. You should get a video or lots of pics when you build it and post to diy section.

 

[MRXC]

i will, as soon as i finish my grow that im running at the moment.

i am still drawing and making sure everything fits perfectly. but im verry excited about this comunity so i will post the progress of how i build the cab and probebly a compleet parts and saw list on how to make it for others to copy

thanks on the reply and if there is some thing i would need to add to the cab i love to hear

 

[MRXC]

Next week i will start building my new grow box. I will go to a carpenter shop and will get my peaces sawed by them... Saves me the time of fucking up with my shitty power saw xD i will post the photos of the construction and later on the install of my gear. Also going to add pics of the saw plans for every one to copy .

Im going to start growing in this box after i harvest my current grow

 

[MRXC]

this is the drawing of what the guy at the carpenters shop gets from me to saw the pieces + a other small box i wil not document becouse its not for growing but just a box i will need any way.

i have to pay the guy 105 euro for material and working time so thats fine by my standards

i will do this tomorrow and will post the pics from the build

 

[MRXC]

heey everybody

I completet the building proces and it will be mainly sawing some holes for air flow and hanging the doors...

I still need to buy a pair of hinges and a pair of locks

My best friend will bring me some mylar in a few days after that i will set up my gear....

So thats going to be a lot of work xD but better off after this

 

[MRXC]

Ey back on the box.. Today made the 125mm holes for air flow and my friend came by and brought me some mylar so i did the flowering speace and added the door.

Still need to get locks and the other hinges for the veg chamber are going to be taken from my current growbox that i will repleace with this one

 

[Amadeus Forzin]

Brilliant build my friend. Looking forward to the finished product.

 

[MRXC]

Thanks looking forward aswell im verry happy with how its going and hoping for the perfect cab to supply me and my girl with continuing flow of good dank

 

[MRXC]

So got it running only need to do some propper weather stripping

Oke so after a month orso my amnesias are done and as soon as posseble im going to start a new journal abouth this cab


Enjoy

 

[MRXC]

O in the pictue you see my veg side as well with the led penal and fan i now have it covert in maylar and the panel and fan in place reddy for some new plants

 

[MRXC]

oke so i had to remove the 400 w hps couse it was to hot and just a wast of energy in this size grow so made a trade for a new 150 watt hps with ballast in a cooltube. I recieveed it today and just instalt it. And i just love it

So i have one flower area of 55 cm x 70 cm. With 150 watt hps on boost and one 170 watt led.
The veg area is 23 cm x 70 cm. With one 170 watt led

Im verry happy with the end result and this is going to suply myself with good smoke

 

[Mello136]

Great build. Might I suggest dropping from a 4oow hps to 150w to help with the heat.

 

[MRXC]

Haha its done.

 

[Mello136]

How did it work out for you?

 

[MRXC]

Great got 170 watts of led and the 150 watt hps boosted at 10 % and i can contol it easy now just set the thermostat and it stays there just finishing of these amnesias soon i will start a new journal about the cab i will wen i get some new soil for my northern lights and i will start useing one as a mother and the others i will just flower off and prep the cuttings from the mother then select the best and gift the others to other growers so i can have 2 nice plants reddy after every harvest . So yeay im good and super happy my cab is like this now