- Thread starter
- #41
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
Any particular reason you were drawn to that light?Starting to lean towards California light works solar system 1100
Starting to lean towards California light works solar system 1100
It may be worth a moment of your time to talk with one of our Canadian clients. He was running a comparison of our 480w versus clw 550 system and quickly switched out to us.
Since then they have expanded with more of our lighting. If interested, just dm us and we can get you in contact with them.
Any particular reason you were drawn to that light?
That's I believe around 2.2 umols/j
Is 800w and I believe around 1700 PPFD in the center which unless you're running high C02 is meaningless because anything over about 1100 is too intense.
I think they claim it covers a 5x5 foot print which personally I dont see how you get that from a 18"x18" light.
That's a bit of a stretch, for good coverage its probably closer to 3x3.
Its $1700
Mine cost $800 and the two of them will easily cover a 3x6 space with very even coverage and its 2.8 umols/j
We grow a bit differently down under. Rule of thumb for us is 1 light per plant, can do less obviously but it’s how I’ve ran for as long as I can remember
That's what I have, one light per plant.We grow a bit differently down under. Rule of thumb for us is 1 light per plant, can do less obviously but it’s how I’ve ran for as long as I can remember
Wow
Ok
So a $1500 light for one plant
Bit excessive
That's what I have, one light per plant.
But my light is 26" x 24' so it easily covers a 3x3 foot print very evenly.
I use a SCROG so each of my plants spread out to about 2.5 x 2.5'
I run a DIY custom built using Pacific Light Concepts Photoboost strips.Yeah I also scrog, try to cover 1mx1m so maybe 3.3x3.3 in feet? What light do you run?
Main reason in the built in cooling fans on top of quality parts
Love to see pics of thatI comfortably get 2-2.5lb per plant, 3 depending on strain
I run a DIY custom built using Pacific Light Concepts Photoboost strips.
All top of the line parts, no need at all for fans, my lights runs very cool, just barely could even call it slightly warm to the touch at 325 watts and is actually chilly dimmed at 250 watts.
Love to see pics of that
That's impressive
Sooooo
Why ya need help from us then....you got it dialed
Love to see pics of that
That's impressive
Sooooo
Why ya need help from us then....you got it dialed
650 watts of current LEDs more than replaces a 1000w DE HPS.Ok no worries I may look into them aswell, my main issue is the heat from the HPS and wanting to upgrade to 1000w led is going to be the way to go not to mention power use.
Was looking at gavitas but they still get hot and no way to air cool
650 watts of current LEDs more than replaces a 1000w DE HPS.
This was last run, day 27 of flower I believe, around day 56 in total. By total I mean when they went under the big lights too
Looks fantastic
Not sure I see a 3# plant in there...but they look great
These weren’t, 3 is a really good run but 2-2.5 are the norm, these ran just shy of 2 as had a few issues early flower with over stretching due to conditions(heat) hence why I’m looking into led
Ok ya lost me
2# in a grow
Or 2# per plant??