Arjen Ultra Haze #1 - 80% Sativa
6 5 gallon buckets - 55 gallon reservoir - HyrdoCorn
Started from seed - Nov. 4th, 2014
Room - Dedicated 20 amp circuit
- Partial 15 amp Circuit
- sealed with black and white poly
- 100sq' room with 60 sq' SCROG mesh 1' above pots
Lights - 8 lamp T5 ProLight mini
- 2 x G25 GrowFunk LED
- 3 Phillips 75 watt grow bulbs
I am purchasing 2 G65'S (450 watts each), 3 G16'S (115 watts each) & 2 more G25'S (150 watts each) from GrowFunk next month to replace the Phillips bulbs.
Nutrients - 50/50 clean aquarium water/ tap water ph'd down to 5.5 during seedling stage.
- Botanicare Pure Blend ProGrow 3-2-4 during vegging
- I am open to suggestion for flowering.
Equipment - Eco Plus Commercial Air 3 (35 watts)
- Eco Plus 264 water pump (28 watts)
- 4'' Can Fan (70 watts)
- Can Filter 50 (Carbon air scrubber)
- Mighty Mini Air Mover (150 watts)
- Rapid Rooter and dome
This is my 1st grow, my water pump drains the bucket faster than the gravity returns water, as such my float valve is left open to often risking a flooded system. So i keep the water levels down in the reservoir. Please help solve this issue.
I decided to let the buckets have different water levels, to see which level yields the best, my highest bucket water level is half way into the substrate while my lowest is an inch below the 6'' basket.
The bubbles are loud and roaring, my diffuser seems to fail with the air pump and i decided to let the air flow at full blast. I built an insulated box for the pumps, I hung the air pump and put all the buckets on rubber matts to reduce sound vibrations. My air scrubber is attached to an insulated duct intaking air from the room into the box, the result is a cooled box for the hot air compressor.
I found sprouting seeds in the rapid rooter laborious, so i am going to try to sprout one in a rapid rooter placed into the rdwc bucket, has anyone succeeded doing so?
The people at GrowFunk LED have been very kind, they informed me I may need to raise my PH due to the LED lights, has anyone done this?
Thank you.
6 5 gallon buckets - 55 gallon reservoir - HyrdoCorn
Started from seed - Nov. 4th, 2014
Room - Dedicated 20 amp circuit
- Partial 15 amp Circuit
- sealed with black and white poly
- 100sq' room with 60 sq' SCROG mesh 1' above pots
Lights - 8 lamp T5 ProLight mini
- 2 x G25 GrowFunk LED
- 3 Phillips 75 watt grow bulbs
I am purchasing 2 G65'S (450 watts each), 3 G16'S (115 watts each) & 2 more G25'S (150 watts each) from GrowFunk next month to replace the Phillips bulbs.
Nutrients - 50/50 clean aquarium water/ tap water ph'd down to 5.5 during seedling stage.
- Botanicare Pure Blend ProGrow 3-2-4 during vegging
- I am open to suggestion for flowering.
Equipment - Eco Plus Commercial Air 3 (35 watts)
- Eco Plus 264 water pump (28 watts)
- 4'' Can Fan (70 watts)
- Can Filter 50 (Carbon air scrubber)
- Mighty Mini Air Mover (150 watts)
- Rapid Rooter and dome
This is my 1st grow, my water pump drains the bucket faster than the gravity returns water, as such my float valve is left open to often risking a flooded system. So i keep the water levels down in the reservoir. Please help solve this issue.
I decided to let the buckets have different water levels, to see which level yields the best, my highest bucket water level is half way into the substrate while my lowest is an inch below the 6'' basket.
The bubbles are loud and roaring, my diffuser seems to fail with the air pump and i decided to let the air flow at full blast. I built an insulated box for the pumps, I hung the air pump and put all the buckets on rubber matts to reduce sound vibrations. My air scrubber is attached to an insulated duct intaking air from the room into the box, the result is a cooled box for the hot air compressor.
I found sprouting seeds in the rapid rooter laborious, so i am going to try to sprout one in a rapid rooter placed into the rdwc bucket, has anyone succeeded doing so?
The people at GrowFunk LED have been very kind, they informed me I may need to raise my PH due to the LED lights, has anyone done this?
Thank you.