Hey folks, I almost bought an EZ-cloner, but ended up saving $$$ and building my own. Using 3/4" PVC for the entire build along with Rainbird misters/sprayers. You can find pretty much everything at your local hardware store; Lowes, Homedepot, Ace etc. I used a PVC cutter, and drill for cutting and inserting misters.
PUSH-LOCK JOINTS & ELBOWS PVC
3/4” 90º elbows
3/4” Tees
3/4” Schedule 40 PVC
(2) 360º misters
(8) 180º misters
Pretty straight forward install/build, just measure twice and cut once.
PUSH-LOCK JOINTS & ELBOWS PVC
3/4” 90º elbows
3/4” Tees
3/4” Schedule 40 PVC
(2) 360º misters
(8) 180º misters
Pretty straight forward install/build, just measure twice and cut once.