Moto258 Grow Journal 2020 MoonDawg, Train Wreck & Unknown Clones From Last Grow

[Moto258]

s

Haha yeah I thought they were kinky lights, walking through town would see the deep purple and thought, yeah them people probably be getting it on a lot
now I’m thinking them people growing something indoors lol.
And about the photos I still can’t view attachments, but embedding them here is viewable for me

i get so lost when it comes to figuring out the internet lol so I understand! Does that mean you can’t see images I’m posting?

 

[Moto258]

Could be wrong but if anyone else knows or Has any comments about personal experiences with what I’m experiencing in the garden let me know whatcha think! The 4 newest members to my garden mood dawg and train wrek were all born the same days, but started noticing slow growth happening on 3 girls in here, but really noticed a difference with the girl on the far left close to the wall (Mood dawg). Well my dilima I’m having is since I had to flush due to having over 2800ppm in my run off on that specific mood dawg I’m getting her female hairs all over. Now in my personal experience anytime I shock one like I did things like this come out much quicker than naturally.

 

[Moto258]

Update on the clones, moon dawg, and train wreck!!! About to throw trellis up and start flowering.

 

[Moto258]

Ready for flowering to start in a couple days!! Trellis up everything I want cut from the bottoms of the clones in the back. Their healing up nice !! More to come..

 

[GL5033]

If you have a spare time please visit my thread

LST, HST, FIM,Topping etc: Help

So im a new with just a little experience, could you describe me how do i use them and when do i use them. Which i can use on autoflowers or photo-periodic ones. FIM SCROG LST HST TOPPING SUPER CROPPING If its there anything else please explain to me and write name of the method

www.420magazine.com

 

[Moto258]

If you have a spare time please visit my thread

LST, HST, FIM,Topping etc: Help

So im a new with just a little experience, could you describe me how do i use them and when do i use them. Which i can use on autoflowers or photo-periodic ones. FIM SCROG LST HST TOPPING SUPER CROPPING If its there anything else please explain to me and write name of the method

www.420magazine.com

absolutely I’ll help ya out! First off I do a lot of training with my lady’s, but do a lot of topping. It really all plays in on how much room you have to grow and amount of light your planning on having to cover your growth from training your plants to bush out more. Since you said you don’t have too much experience in my opinion I wouldnt do to much of the high lst training because your taking that chance on causing a delay in your growth if you bend a branch to much, but these weeds come back from a lot of damage that’s if your growing in soil. But hydro completely different. I normally low stress my plants by slowly staking them down and slowly each day puch the stakes further down by a hair allowing the branches to slowly absorb the impact of pressure being pushed on them. Hence having to do the high stress way when your actually bending the branches to form a new angle in the branch. But it’s highly recommend if your growing indoors in my opinion so that you can get more out of one plant. If you look at my grow journal I’m currently in now the 4 clones in the back I’ve taken all the lower growth from the bottom out because these things are monsters. But when I introduced them back to veg after being in flowering for a couple weeks I started to slowly push the tops of the plants down until I had most of the tops equal in height then each week I’d cut a few branches and leaves that weren’t going to get much light until I have what I have now. If you plan on using a trellis what I normally have been doing is waiting about 3 days to a week from going into flowering. Throwing it on top of the plants and start from one angle like what you would do if you were to tighten your lug nuts on a vehicle you tighten them like a star pattern. Same concept with trellis you just want to slowly tack them to the walls around or tent which ever set up you have. Some times it takes a couple days to fully put up a trellis so that your able to train the branches you want to reach to tops, but just make sure you have it nice and tight after your finished so you don’t have to repair during growth. Now I will be using a few trellis so if you don’t plan on having monters it might be best to start the trellis once you start to notice the stretch in 12/12. Just don’t get lazy like I have done in the past and think it can wait because then your stuck trying to force it on... and trust me that succckkkkkksss!! Let me know if you need any help with that because I’m not the best but I have ocd pretty bad and make things almost to a T every time.. lol. Happy growing my friend!

 

[Moto258]

If you have a spare time please visit my thread

LST, HST, FIM,Topping etc: Help

So im a new with just a little experience, could you describe me how do i use them and when do i use them. Which i can use on autoflowers or photo-periodic ones. FIM SCROG LST HST TOPPING SUPER CROPPING If its there anything else please explain to me and write name of the method

www.420magazine.com

 

[GL5033]

absolutely I’ll halp ya out! First off I do a lot of training with my lady’s, but do a lot of topping. It really all plays in on how much room you have to grow and amount of light your planning on having to cover your growth from training your plants to bush out more. Since you said you don’t have too much experience in my opinion I wouldnt do to much of the high lst training because your taking that chance on causing a delay in your growth if you bend a branch to much, but these weeds come back from a lot of damage that’s if your growing in soil. But hydro completely different. I normally low stress my plants by slowly staking them down and slowly each day puch the stakes further down by a hair allowing the branches to slowly absorb the impact of pressure being pushed on them. Hence having to do the high stress way when your actually bending the branches to form a new angle in the branch. But it’s highly recommend if your growing indoors in my opinion so that you can get more out of one plant. If you look at my grow journal I’m currently in now the 4 clones in the back I’ve taken all the lower growth from the bottom out because these things are monsters. But when I introduced them back to veg after being in flowering for a couple weeks I started to slowly push the tops of the plants down until I had most of the tops equal in height then each week I’d cut a few branches and leaves that weren’t going to get much light until I have what I have now. If you plan on using a trellis what I normally have been doing is waiting about 3 days to a week from going into flowering. Throwing it on top of the plants and start from one angle like what you would do if you were to tighten your lug nuts on a vehicle you tighten them like a star pattern. Same concept with trellis you just want to slowly tack them to the walls around or tent which ever set up you have. Some times it takes a couple days to fully put up a trellis so that your able to train the branches you want to reach to tops, but just make sure you have it nice and tight after your finished so you don’t have to repair during growth. Now I will be using a few trellis so if you don’t plan on having monters it might be best to start the trellis once you start to notice the stretch in 12/12. Just don’t get lazy like I have done in the past and think it can wait because then your stuck trying to force it on... and trust me that succckkkkkksss!! Let me know if you need any help with that because I’m not the best but I have ocd pretty bad and make things almost to a T every time.. lol. Happy growing my friend!

thanks a lot my new growlight is LED cob cree 200w (real power usage 108) and growbox it will be
50x50x120cm.

 

[Moto258]

thanks a lot my new growlight is LED cob cree 200w (real power usage 108) and growbox it will be
50x50x120cm.

Nice! Better than my first indoor grow lmao. I started off with 9 10watt LEDs with about 6 plants haha!! But as they grew in size I started upgrading to the sp 1000, then another sf 1000 and now I have 2 sf 1000s and 2 sf 2000s lmao! FYI in a closet haha, but now in a decent size room that was going to be a bathroom so I took everything out besides the exhaust fan to vent out air.

 

[Moto258]

Cheers to the first day of 12/12 for these girls!!

 

[Moto258]

Hey I also wanted to mention if you plan on topping I wait till I see 3-4 nodes and branches starting to pop out from the main stem. I’ve always pinched them off with my clean fingers but you can also use clean sharp sissors. I noticed I missed a little bit of the top so my plant took a little longer to repair it self but now that plant has multiple tops forming from that error in missing some of the top. Let me know if you need help with it when comes time. Happy growing!

 

[Moto258]

And the stretch has begun!!

 

[Moto258]

Update on garden! Still in the stretch all hairs I wanted to see in moon dawg and train wreck. Found a male in my moon dawg section so bouted him out to a different spot. Plan on getting his pollen for future endeavors!! Still training train wreck to bush out more good lord she’s a fast one!!! Almost set up to keep Mother’s I have one of the fastest plants I’ve ever witnessed I’m totally wishing I was already set up to keep her indoors to clone her out! That’s okay tho!!

 

[Moto258]

Clones transformation from May 25th to present day! (6/24/20)... went from 2 weeks in flower in the flower room indoors after she took a spill in the room and ended up cloning her out to four girls instead of making her go to waste. Ended up taking them four clones out side to start to veg back out, but couldn’t get enough sun light to get them to change back. Ended up putting them under 4ft fluorescents for a couple weeks till I was finished flowering out the indoor plants. Finished the harvest and put them under full spectrum leds. Took some time to cut out all the old growth in order to flower them back out, but their in full flower now and their starting to form their buds!! Figured I’d explain their situation if anyone out their in the grow community wanted to know.

 

[Moto258]

Documenting the clones stretch.

 

[Moto258]

Stretching continues!! But 2nd layer of trellis is up on the 4 clones and already needing a 3rd!! Defoliation in the next days to come..

 

[Moto258]

Update! Moon dawg is frosting up nicely! Train wreck and clones are still in full stretch still. Buds are forming all over the clones now and plan to remove some leaves in a couple days. Just giving the girls some more potential on reaching the top before removing leaves.

 

[Stormblessed]

Looking good

 

[Moto258]

Looking good

Appreciate it my friend!

 

[Moto258]

Getting some colors already! Dang this thing is frosty!!!!