- Thread starter
- #41
ganjazz
Well-Known Member
Day12: Flower
Trained abit and gave shower.
Ladies advancing level up
Trained abit and gave shower.
Ladies advancing level up
Ganja Closet Grow - LED - HPS
thebeast27
On Vacation
Perfect canopy mate plenty of buds to come
Xenonrae
New Member
Very nice!
4 girls is definitely going to give me a run for my money!
How much upwards force have you noticed there being on your screen?
Trying to decide if I can make one out of pvc pipe and just wire-tie it to the corners of my tent.
Cheers!
4 girls is definitely going to give me a run for my money!
How much upwards force have you noticed there being on your screen?
Trying to decide if I can make one out of pvc pipe and just wire-tie it to the corners of my tent.
Cheers!
- Thread starter
- #44
ganjazz
Well-Known Member
Thanks, beast27
Keep 'm happy for good delivery
----------------------
Guess around 6-7 more weeks now before harvest (under HPS)
Last 2-3 weeks will switch to 440w
Dont use mars2 700w for this round, upcoming grow(auto's) will be led only.
Rectangle space can be used more optimal for 3 plants transverse since they aren't topped.
Keep 'm happy for good delivery
----------------------
Guess around 6-7 more weeks now before harvest (under HPS)
Last 2-3 weeks will switch to 440w
Dont use mars2 700w for this round, upcoming grow(auto's) will be led only.
Rectangle space can be used more optimal for 3 plants transverse since they aren't topped.
- Thread starter
- #45
ganjazz
Well-Known Member
Wire-tie from from corner to corner can work/hold when strong enough, but never tried that.
Used part of fence for screen, its not that heavy and plants will lift it up when grow stronger so attached each corner with this(see pic),can move height when needed.
- Thread starter
- #46
ganjazz
Well-Known Member
Today recieved replacement leds for mars2.
-Thanks Sarah from Mars-Hydro for the good service-
Desoldered burned ones,used a little cooling paste under new leds and soldered.
Everything works fine again,
-Thanks Sarah from Mars-Hydro for the good service-
Desoldered burned ones,used a little cooling paste under new leds and soldered.
Everything works fine again,
thebeast27
On Vacation
Nice work mate well done
- Thread starter
- #48
ganjazz
Well-Known Member
Nice work mate well done
Got some spare ones aswell
Went DIY shop and gonna finish 2nd grow cabinet today, so better not smoke too mutch else couchlock again.
Xenonrae
New Member
Got some spare ones aswell
Went DIY shop and gonna finish 2nd grow cabinet today, so better not smoke too mutch else couchlock again.
How long into owning your Mars2 did you experience problems?
- Thread starter
- #50
ganjazz
Well-Known Member
db003
Well-Known Member
man those plants are looking just great I love a good scrog
- Thread starter
- #52
ganjazz
Well-Known Member
Day14: Flower (6-7 weeks before shop)
With led it took(previous grows) 2-3 weeks longer than discribed, assume with HPS to harvest faster.
Ladies are stretching and nice budscreen is forming, trunks become wood , moved light 5cm up
Prognose harvest +-300gr which should be achievable for 3 girls under 400W HPS
from left to right: orange bud, bubblicious, critical jack
With led it took(previous grows) 2-3 weeks longer than discribed, assume with HPS to harvest faster.
Ladies are stretching and nice budscreen is forming, trunks become wood , moved light 5cm up
Prognose harvest +-300gr which should be achievable for 3 girls under 400W HPS
from left to right: orange bud, bubblicious, critical jack
Xenonrae
New Member
Is this day 14 into flower? or day 14 in general?
Edit: Sorry. Stoned. Thought I was looking at an af grow.
Was freaking out that they were that huge 14 days in, bahaha.
They're looking so good!
Edit: Sorry. Stoned. Thought I was looking at an af grow.
Was freaking out that they were that huge 14 days in, bahaha.
They're looking so good!
- Thread starter
- #54
ganjazz
Well-Known Member
Is this day 14 into flower? or day 14 in general?
Edit: Sorry. Stoned. Thought I was looking at an af grow.
Was freaking out that they were that huge 14 days in, bahaha.
They're looking so good!
High,
If a genetic could grow that fast would be awesome
The girls look healthy green, so far so good.
- Thread starter
- #55
ganjazz
Well-Known Member
Thanks,
Can't let them run much up in height so scrog is best way, and should give higher yield(more big buds) through better dispersion light over budscreen.
Every grow do abit different, didn't top for scrog and do less defol(only shadow leaves)
And water them 1 time less/week
Also this first time with HPS for flowering.
Xenonrae
New Member
I need to start looking at articles explaining defol'ing. Moreso when. Too afraid to slow down too much growth on my autos. But the AK is super bushy.
thebeast27
On Vacation
Ur plants will love hps for flower my friend good job.big buds to come
good job.big buds to come- Thread starter
- #58
ganjazz
Well-Known Member
Couldn't help it and started with heavy defoliation
After 2 weeks flower is good time to do this, had good result first grow so just decided do again.
Its easier to postion tops under screen now,and better spread.
Growth will slow down/stop few days but than burst again.
It also helps to let 'm not stretch too mush i think.
Pics follow when finished.
After 2 weeks flower is good time to do this, had good result first grow so just decided do again.
Its easier to postion tops under screen now,and better spread.
Growth will slow down/stop few days but than burst again.
It also helps to let 'm not stretch too mush i think.
Pics follow when finished.
thebeast27
On Vacation
Ganjazz i did research before switching from hps to led.and it kept popping up.that the flowering period takes longer under led. I put it down to lower temps as i found out myself lol so makes sense what ur saying.good work
so makes sense what ur saying.good work
Xenonrae
New Member
Ganjazz i did research before switching from hps to led.and it kept popping up.that the flowering period takes longer under led. I put it down to lower temps as i found out myself lol
Good information to know.
Similar threads
