newoldguy
Well-Known Member
LoL
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
No, but he DID stay a holiday inn express last night...and his wife makes him watch next top model.
Nothing to it, Shrike. This is 100% a Home Depot job. I doubt it was $30 bucks. You need one stick (4') of steel rod. (They sell various sizes. Measure the eyelets hole size.) For the P-150, cut 6" long pieces and bend 90degrees at the center using a bench vice and hammer. Next readjust the rods and bend the two ends 45 degrees to bring the main rod back to level (strait). I then taped off the ends and applied a rubberized dip to the center of the brackets and to the bottoms of the D rings to keep the light quiet and more stable. Next you need a piece of clear tubing that is a couple sizes too small for the rod. Cut some small pieces. Slide one end at a time in the eyelets and secure them in the center of light using the clear tube over the bracket to hold them in place. I forge exactly how much room I picked up, but it was close to 9". I use 4 P-150s and one girl maxed out the light travel I had. This solved it. It's not much, but hey, 9" could keep a bud safe.....I saw those modified hangers, McC...very nice.
I think many of us wouldn't mind using that mod...do you have a breakdown of what items you used (sizes, costs, etc.)? Did you bend those metal rods yourself or purchase them that way?
Nice job and something really practical...especially if you don't have a lot of vertical room in your grow space...