Game Changer: Mars Hydro SP 3000

Mars Hydro

420 Sponsor
When we talk about Mars Hydro, the first impression might be: it is a middle high level brand, very cost efficient for most personal growers, very great for veg, but bloom not that good. Personal only, not for commercial. etc. But this time, we are releasing our new product SP 3000, which might overthrow the previous thoughts. :green_heart:

Why would we so confident?

- Sumsung lm301b & Osram 660nm leds


Unlike our previous grow light series, this time we choose only the high end ones. Sumsung lm301b is known to be one of the best grow lightchip in the market, higher light output, less heat, and longer lifespan, also Osram's red leds are known in the grow chip market as well. Fluence, HLG, Next Mega, etc are all using the same kind. These chips are great, but expensive as well. So from the market, you might found most of the grow lights with these chips are not cheap. For example: Fluence Vyper2x is over 700USD with around 700pcs leds, HLG 550 is over 800USD with around 1100pcs leds which caculated to be around 0.7USD~1USD/pc; On our SP 3000, we uses 960pcs leds, which cost only 0.41USD/pc. Why 960pcs? Cause before we decide to make this light, we did a lot tests, and we found when the chips are at 0.3w, they actually puts out the most, while saving more energy. To make the light at 300w, we need 960pcs of chips. The final PPFD of this light is over 2.7umol/j. Helping growers saving real energys, and replacing 600w HPS without any problem. Will 960pcs chips making too much heat? We also did a test, compared with our SP 250(which has over 700pcs Epistar chips on the same size board, but 230w) We found that the heat produced by the SP 3000 is actually lower than SP 250, which only increase less than 3C degrees for the tents temperature.

- Real Sunlike Full Spectrum

Spectrum is the key to plants growth. Before we finally decide to use this spectrum, we have done a lot experiments. Blue spectrum which from 440~460nmare really great for plants growth, while 650~660nm are great for plants flowering. This is known to all, but the hardest thing is to find the right ratio to mix all the light so that we can get the perfect spectrum. This time, we add more walm white and also red chips, UV and IR are also there, and the spectrum are just perfect for plants growing. Mars Hydro will no longer be the led grow light brand who can produce only "veg" light, but also the real great full spectrum light for both personal and commercial growers!

- Easily Controlled Dimming Function

To help growers uses the light more conviniently, we do upgraded on our SP 3000 with the dimmer function. Growers now can control the light density very easily without adjusting the hanging height. But how would just one dimming function differs Mars Hydro from other brand? We add the dimming function to be connectable. If growers buy more than one light, they can actually connect up to 15 lights together to control them on one lamp. Unlike other grow light brand, which might need growers to buy an additional controller, and might cost around 800USD, we save this cost for you. Now from personal grower to commercial growers, SP 3000 can be all suitable. Using the least money, growing the best plants.

Other than the above features, we also remains the great features on our SP 250 as thick aluminum heatsink design to help heat dissipate, IP 65, waterproof to help using in the high humidity growing conditions. 2 meter long extention cords to help growers remove the driver away from the light. What is more, you will find our Mars Hydro Stickers in every light package.


Do you want this awesome light to help you grow big? Click here to order now! If you have any question, feel free to leave your

comment below!




 
Ooooo. Link doesn’t work though.
Since SP3000 is not released yet, it will be released in 3 hours, so the link will be available after 3 hours :D
 
Mars Hydro SP3000 LED just released!!! :theband:
We are now open for preorder, please check our website for details:
 
I've just ordered 4 of the SP 3000 and was wondering about the input voltage. With my old HID ballast I would run it at 240V to lower the amperage through the unit thus reducing ballast temperature and hopefully prolonging ballast lifespan. Is this practice still recommended with the SP 3000?
 
I've just ordered 4 of the SP 3000 and was wondering about the input voltage. With my old HID ballast I would run it at 240V to lower the amperage through the unit thus reducing ballast temperature and hopefully prolonging ballast lifespan. Is this practice still recommended with the SP 3000?
my manual says that the sp 3000 will run with voltage from 100-277v. In any large wattage situation, if you can run lower current with higher voltage, you gain efficiency, and electric runs do not heat up (wasted energy) nearly as much from the breaker box to your light.
 
my manual says that the sp 3000 will run with voltage from 100-277v
If it will run with higher voltage then that's probably what should be used. My 1000 HPS digital is too hot to touch at 120V but just slightly warmer than room temperature at 240V. It's like night and day.
 
Back
Top Bottom