Usual Coco Pots With A Twist Of NFT
- Thread starter
- #22
Scoobynew
Well-Known Member
I haven't looked at the clones since last update but I will check them out in the next few days an get a update the guy they come off will replace the ones that don't perk up anyway
I'm looking forward to checking on the 3 in the nft if they are growing well Ile take some cuts from them when they big enough an keep for my own mother plant then I don't need to rely on others I have been wanting to get a good mother plant for a long time one thing or another I just haven't got round to it
I'm looking forward to checking on the 3 in the nft if they are growing well Ile take some cuts from them when they big enough an keep for my own mother plant then I don't need to rely on others I have been wanting to get a good mother plant for a long time one thing or another I just haven't got round to it
- Thread starter
- #24
Scoobynew
Well-Known Member
Well majority of the cuttings are looking lot happier looks like we lost about 4 they will be put into 12ltr pots in the next few days
The 3 seeds in the nft table seem to be doing well hopefully in another week Ile be able to get a cut from each of them
The bigger plants are nearly a month into flower an now starting to see bit of frost on them they are mainly blue cheese and looking super healthy they are on 1.4-1.6 ec which seems low but I don't see the reason to feed more when they are lush green already
The 3 seeds in the nft table seem to be doing well hopefully in another week Ile be able to get a cut from each of them
The bigger plants are nearly a month into flower an now starting to see bit of frost on them they are mainly blue cheese and looking super healthy they are on 1.4-1.6 ec which seems low but I don't see the reason to feed more when they are lush green already
- Thread starter
- #25
Scoobynew
Well-Known Member
Update the cuttings have grown a lot in the last 9-10 days but not as healthy as I would like which I believe is because who is looking after them has been feeding and not checking ph so it looks like a cal+ mag issue but I have corrected the problem so next time I check they should be back to full health
The 3 in the nft have really took off an the leaves are as big as I've ever seen bigger than my hands. I might even flip them to flower early part this week to gain some room
The big plants only have about 14 days left an are still healthy but not packing as much as I would expect so hopefully the yield will still be ok. They are still very dense
The 3 in the nft have really took off an the leaves are as big as I've ever seen bigger than my hands. I might even flip them to flower early part this week to gain some room
The big plants only have about 14 days left an are still healthy but not packing as much as I would expect so hopefully the yield will still be ok. They are still very dense
- Thread starter
- #27
Scoobynew
Well-Known Member
Yes it's just to let some air in there's a window behind the plywood there's also a hole in the ceiling that goes into roof void to let more fresh air aswell then theres a 12 inch fan filter taking the heat annsmell away
BedroomFarmer
Well-Known Member
Crazy. I thought I subbed this thread already. Your plants are looking great!
- Thread starter
- #29
Scoobynew
Well-Known Member
Thanks mate good to see someone else is having a look
how do I get the journal link to show up under my posts like yours
how do I get the journal link to show up under my posts like yours
BedroomFarmer
Well-Known Member
I still don't fully understand it. Lol I'll try to get it set up so you can just copy and paste
Edit: Here she is!
Usual Coco Pots With A Twist Of NFT
Just copy and paste link to your "edit signature" in user cp
Coco with a twist
Edit: Here she is!
Usual Coco Pots With A Twist Of NFT
Just copy and paste link to your "edit signature" in user cp
Coco with a twist
- Thread starter
- #31
Scoobynew
Well-Known Member
Thanks bedroom I've done as you said so let's see if it works 
Another little update as I'm bored
I moved the nft plants into the flower room as they seem to be growing at a insane rate the weird thing is I checked the soup an the ec was 1.8 and the ph 3.8 yet they look happy as can be last refill was set at 1.2 and 5.6 , so for the ph to drop so low and ec to be pretty high means Even at 1.2 ec the plants did not need it so strong
so they have drank more water compared to nutes
I plucked a leaf off to show the size comparison to my hand
The big plants don't have to much longer left I have already started feeding straight ph'd water for a good flush so a few leaves are starting to yellow
Another little update as I'm bored
I moved the nft plants into the flower room as they seem to be growing at a insane rate the weird thing is I checked the soup an the ec was 1.8 and the ph 3.8 yet they look happy as can be last refill was set at 1.2 and 5.6 , so for the ph to drop so low and ec to be pretty high means Even at 1.2 ec the plants did not need it so strong
so they have drank more water compared to nutes
I plucked a leaf off to show the size comparison to my hand
The big plants don't have to much longer left I have already started feeding straight ph'd water for a good flush so a few leaves are starting to yellow
BedroomFarmer
Well-Known Member
It's coming up as a link. Copy and paste this in the edit signature. Don't click on anything just copy and paste in the open box.
Usual Coco Pots With A Twist Of NFT
Usual Coco Pots With A Twist Of NFT
- Thread starter
- #34
Scoobynew
Well-Known Member
- Thread starter
- #35
Scoobynew
Well-Known Member
I done as you said but it still seems to be a link rather than the thread name
BedroomFarmer
Well-Known Member
I'm sorry. It stopped working for me. I'll keep trying
I think I got it
Copy this link and then in the signature section hit the icon with a world and a link.
usual-coco-pots-twist-nft
For some reason it was changing the link it put up. Make sure it looks like this or change it to look exactly like this
Except for the X in XRL that needs to be a U
[XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]
So when I put in the link it would add an extra url make sure it looks like this
[XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]
And not like this. Notice how it added extra url you have to remove them
[XRL="https:// [XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]"]https:// [XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL][/URL]
See the difference. You have to make the one on the bottom look like the one on top. It should come out like the middle link in my Sig if you do it right. It will look like lower one if not right
I think I got it
Copy this link and then in the signature section hit the icon with a world and a link.
usual-coco-pots-twist-nft
For some reason it was changing the link it put up. Make sure it looks like this or change it to look exactly like this
Except for the X in XRL that needs to be a U
[XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]
So when I put in the link it would add an extra url make sure it looks like this
[XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]
And not like this. Notice how it added extra url you have to remove them
[XRL="https:// [XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL]"]https:// [XRL="[URL][URL][URL][URL="[URL="https://www.420magazine.com/community/threads/usual-coco-pots-twist-nft.288084/[/URL][/URL][/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]Usual Coco Pots With A Twist Of NFT[/URL]"]usual-coco-pots-twist-nft[/URL][/URL]
See the difference. You have to make the one on the bottom look like the one on top. It should come out like the middle link in my Sig if you do it right. It will look like lower one if not right
- Thread starter
- #37
Scoobynew
Well-Known Member
Mate I appreciate ya taking the time to help me what ever happened to simple lol
BedroomFarmer
Well-Known Member
Lol it's a lot easier then it looks... Copy, paste and clean up the link. Save it, that's all
- Thread starter
- #39
Scoobynew
Well-Known Member
Dunno if I'm just being thick but I've tryd about 10 different ways an can't seem to get it never mind
BedroomFarmer
Well-Known Member
Lol sorry. I think it has to do with the link. It needs to be shortened after you paste it. At least people will still be able to find your journal with your current signature.
