dreadkrazy
New Member
Hello growers, I've been using Mars-Hydro LEDs for awhile and I love my lights! Come and join my grow for the 3rd Mars-Hydro Cup. You can follow me here, Instagram or YouTube find the links in my signature!
To start this grow, I cleaned and sterilized my 4x4 indoor grow tent.
Next I have 4 crates I'll be using under the buckets this grow, for now I'll be using 2 of them.
I have 4 5.3 gallon square buckets I'll be using. I sterilized them all with 91℅ isopropyl alcohol
I then added my lids that are covered in foil tape, and cut for 8 inch net pots.
Now I add my 4 outlet air pump, and thread my blue air tubes through the net pots, and attach my large air stones to the end of the hoses. It is very important to note the hoses must be cut to the same length, otherwise you will have differences in the amount of air coming out of each stone, or worse, you'll have some that won't work at all.
Awesome good bubbles everywhere! Time to add the hydroton to the nets(rinsed of all silt) and the freshly rooted clones, planted approximately halfway down.
For the purposes of this journal, I decided to keep track of each clone by numbering them 1-4
And of course, the grow wouldn't be complete without rocking my Mars-Hydro reflector 48s, I'll slam 2 of them above these baby's for now untill they're bigger, with the bloom switch to the off position.
All this was done yesterday on the 1st of January. I will update 1-2 times a week and will update daily on Instagram! I will also have a video update on my YouTube channel once a week.
Once these girls drop roots, I will add nutrients and perform a res change every 6-10 days.