I used one of those fans with a 4" filter in my stealth cabinet and it worked fine. That was a bit smaller though.
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
I would not use a scrubber/filter!you may need something with a little more power to pull through a scrubber unless you don't have to run stealth.
Hope you take some time for yourself to enjoy the holiday.Hi guys, as tomorrow is a holiday in my country and I will have some time, I have decided that I will do various measurements inside the grow box, a ppfd map using the build at various powers and various heights. I'll keep you up-to-date! In the end I decided that the grow space will be my growbox 40x40x120, and no longer the Ikea cabinet
I got them on DigiKey! So they should be original. This is why I don't understand how their efficiency is so lowWhere did you get the strips again? Any chance they could be a knock off? Either way I'm sure it'll do the job.
Mine grew this.
Could just be the apps and the device you're using them on.I got them on DigiKey! So they should be original. This is why I don't understand how their efficiency is so low
I thank you! I think spacing them as you did, building a frame, is even better from a coverage point of view, as it was now it gave me little coverage on the sides.Sounds like a good plan. It'll be great in your cabinet. Looking forward to seeing you grow with it.
Pretty sure it was 4oz. That one was in a 4 litre pot in soil. Trying to remember but I think it was in my 40x40x100 tent and pretty much filled it width wise.Can I ask how dry you got from your gorilla?
I got them on DigiKey! So they should be original. This is why I don't understand how their efficiency is so low
Hey guys! Here is the build in the final version.
As I told you, it is a copy of Vet's build
This is the aluminum frame, 2 strips of 300x40mm and 2 strips of 285x15mm, both are 3mm thick
And there was light
The maximum power will be 80w, I have not put any heat sink, as using it below 75% of its maximum (700mA) should not need it. It will probably have a shorter life but as @Nunyabiz also said in the original post by Vet, it will still last a long time (or rather, I hope so).
In the end I think it was simply the app + the sensors on my phone that gave me incorrect data.digikey sarà il prodotto legittimo. mi occupo di digikey e mouser da anni.
l'aggiunta di più barre potrebbe non essere d'aiuto a meno che non possano essere guidate alla portata massima del tuo driver. si desidera che l'uscita del driver e gli emettitori siano abbinati in modo uniforme, con gli emettitori generalmente guidati al 50%.