Superlemon Haze - Drip Irrigation - HID - 2011
- Thread starter s13ontap
- Start date
lbezphil2005
New Member
Man you have a terrific amount of space to work with. I am so, so jealous!! LOL! You are going to have some of the best smoke rolling off that assembly line, bro!! Keep up the good work, and no, the Super Lemon Haze is not very forgiving, but she do smoke fine, so be careful, a lot of things can go wrong with her if you miss something! I know, I did have 2 vegging nicely, they don't like too much fluctuation in ph, let me tell you, now I only have 1!!
- Thread starter
- #44
- Thread starter
- #45
FUCK! Something must have happened today, my pump and airstone power bar's surge protector was tripped. i checked on my plants and everything was on it's side. They all recovered, but the roots died back pretty good. I hope to god it was something tripping the surge, not my high ass hitting it last night. that'd mean they were dry for almost 18 hours.
They're fine now though, i just have to see if they recover, what a bad time to kill roots, right after i topped the one plant the second time, trimming 4 nodes. she needed all the root she had
sad face.
end rant.
They're fine now though, i just have to see if they recover, what a bad time to kill roots, right after i topped the one plant the second time, trimming 4 nodes. she needed all the root she had
sad face.
end rant.
- Thread starter
- #47
Growing247
New Member
I wonder how much this stuff is going to taste like lemons. I bought a clone from the local dispensary marked on the Dixie Cup it came in as "LEMON DIESEL" I took it home and vegged it for a month, flowered it, and now am drying it. It is, without a doubt, very lemony and pine smelling to the max. I have grown a few good strains that smelled good while flowering but nothing like this Lemon Diesel. The plant grew bananas and a few seeds so some people might think thats a bad thing but im stoked to get some seeds from this thing because despite the fact that it grew a few bananas and seeds, it came out really really really dank. Did not get enormous yields, but the buds are looking like something you would see out of the bud mags with big ol fox tails and buds growing out of buds if you have ever seen that phenomenon. Anyway, my point is the lemon tasting strains beat the blueberry or grape tasting stuff any day of the week. Chem Dawg has a lemony kerosene taste. Lemon Diesel is absolutely even more lemon tasting than that. So, how does Super Lemon Haze compare I wonder?
- Thread starter
- #50
Ohhhh Nooo! Hope you dont have electrical problems!!
no that was last grow's problem (apparently you can only run 1.3 ballasts on an 120v circut. after that it's too much load) but not this time. it was a bad impellor in my water pump.
anyway, a bit of an update. still no camera. the little ones are doing ok-ish. i decided not to prune them anymore, and just let them recover, (due to root stress) it might cut a QP or more off my net weight, but it's better than me killing them all.
Also, cut 15 clones off the mother, and she too is recovering, and getting ready to go into flower in the next 2 weeks with her babies. (she's gonna be a monster, she's already a 2.5 foot shrub. (around, and tall) and i just pruned 14 clones off her, so with any luck she'll have about 20 predominant colas. i'm gonna put her in the middle of the 9 spots in my flower room, and work her branches around the outer plants as she grows. (she's gonna be my biggest plant ever, I'm so excited)
I've gotta get a camera again. sorry guys. IO've got lots of pics to take too. clones, mom, brand new flower room, baller electrical, gangster ventilation setup... lol (maybe not as cool to you gurus, but it makes me stop and stare every time i open the door to the room)
-Thanks for sticking around. I'll whore a camera soon. i promise.
- Thread starter
- #51
- Thread starter
- #52
Steve McStoferson
New Member
haha people don't like to read when they're stoned but rather like to look at bud porn.
I'm still checking in on updates, just don't post too much
I'm still checking in on updates, just don't post too much
- Thread starter
- #55
lol thats so true. i love bud porn. I log on and get distracted by the pics on the first page.
lol i'll get a camera soon. just spent my camera money on some earrings for the baby girl. Lol baller ass baby..... I wish I had canary diamond studs.
...or a camera for that matter
lol i'll get a camera soon. just spent my camera money on some earrings for the baby girl. Lol baller ass baby..... I wish I had canary diamond studs.
...or a camera for that matter
Steve McStoferson
New Member
haha gotta keep those girls happy man, if not they show deficiencies 
hahaha
hahaha- Thread starter
- #57
- Thread starter
- #58
- Thread starter
- #59
New Batch Of Clones
Spiffy New Electrical Shit
6 240V Outlets - Timed for Ballasts
2 120V Outlets - Untimed for fans, etc.....
Now For An Overview Of What I've Been Doing Since My Camera Broke
I've finished the flower room, also made a chamber for the clones and mothers when I get them grown. I think I'm gonna keep the SLH strain as one mom, and possibly buy some NYC Diesel to have as another Mom, so I can alternate strains every month, then I'll be happy. but I digress...
I also fitted a new Electrical box, Built a box that plugs into the 30amp Dryer outlet in the next room. This runs to a junction box and to a timer, that times 6 240V outlets for ballasts. it also gives me an extra 120 breaker to load, with 2 outlets (un-timed) with that plus the room breaker @ 120V I've got 2 separate breakers running in the room. So no more tripping breakers due to overloading circuits.
Installed new light hangers and set up PVC and tables. Built room walls. One problem I ran into was either sub-par Mylar, letting light leak through, or more light inside the room now that everything is 240V. I don't know which, but i need to 2 ply the Mylar on the door side still because of it.
Upgraded my VEG room exhaust fan from 130 to 230 to create negative pressure in VEG room, and ducted the exhaust into the new FLOWER room.
Also added a 130 for fresh air intake into the flower room
Then installed a 6" In-line fan for exhaust. venting past lights and through chimney (this will be replaced by an 8" mounted on a CAN 100 soon )
Still need to mount an osculating fan on the ceiling to add airflow from a safe distance, but right now there's a fan in the corner.
And that's pretty much it. ON TO THE PICS
This is the view you see when you enter the room
This is the outside of the VEG room
The area that needs to be made into the second FLOWER room
The current ventilation out of the flower room, exhausting out the MAIN
The NEW and Improved Flower Room #1
This is the tiny opening to the clone room. (Will also be the mother room once I plant mothers in air-pots)
The Exhaust fan Collecting and running through the lights (currently 6 inch. Will be replaced by a can 100 and an 8inch)
These are my new Adjustable Light Hangers
And this Is My PROBLEM - Height. the ceiling in this room drops in the back a foot(see previous pic), and I might not have room to grow the plants that I plan to grow. So I might have to cut the legs shorter and find a lower, wider resivoir.
NOW FOR THE PORN
Here's the mother, now she's just one of the girls. I decided to flower her and plant a new one in soil as a mother.
Here's the biggest of the kids
And I guess I'll just post all the rest that i took in a jumble here. they're all of the plants, In the final week of vegging. about a half week away from getting switched over to flower light cycle and nutrients.
I hope you guys Enjoy. I'll post more as things happen.
(oh, mother was larger, but too big for the light level, so i pruned her back a bunch like 2 days ago, when I moved the plants to the new room. she might still get tied down to get the canopy where I want it. we'll have to see)
Spiffy New Electrical Shit
6 240V Outlets - Timed for Ballasts
2 120V Outlets - Untimed for fans, etc.....
Now For An Overview Of What I've Been Doing Since My Camera Broke
I've finished the flower room, also made a chamber for the clones and mothers when I get them grown. I think I'm gonna keep the SLH strain as one mom, and possibly buy some NYC Diesel to have as another Mom, so I can alternate strains every month, then I'll be happy. but I digress...
I also fitted a new Electrical box, Built a box that plugs into the 30amp Dryer outlet in the next room. This runs to a junction box and to a timer, that times 6 240V outlets for ballasts. it also gives me an extra 120 breaker to load, with 2 outlets (un-timed) with that plus the room breaker @ 120V I've got 2 separate breakers running in the room. So no more tripping breakers due to overloading circuits.
Installed new light hangers and set up PVC and tables. Built room walls. One problem I ran into was either sub-par Mylar, letting light leak through, or more light inside the room now that everything is 240V. I don't know which, but i need to 2 ply the Mylar on the door side still because of it.
Upgraded my VEG room exhaust fan from 130 to 230 to create negative pressure in VEG room, and ducted the exhaust into the new FLOWER room.
Also added a 130 for fresh air intake into the flower room
Then installed a 6" In-line fan for exhaust. venting past lights and through chimney (this will be replaced by an 8" mounted on a CAN 100 soon )
Still need to mount an osculating fan on the ceiling to add airflow from a safe distance, but right now there's a fan in the corner.
And that's pretty much it. ON TO THE PICS
This is the view you see when you enter the room
This is the outside of the VEG room
The area that needs to be made into the second FLOWER room
The current ventilation out of the flower room, exhausting out the MAIN
The NEW and Improved Flower Room #1
This is the tiny opening to the clone room. (Will also be the mother room once I plant mothers in air-pots)
The Exhaust fan Collecting and running through the lights (currently 6 inch. Will be replaced by a can 100 and an 8inch)
These are my new Adjustable Light Hangers
And this Is My PROBLEM - Height. the ceiling in this room drops in the back a foot(see previous pic), and I might not have room to grow the plants that I plan to grow. So I might have to cut the legs shorter and find a lower, wider resivoir.
NOW FOR THE PORN
Here's the mother, now she's just one of the girls. I decided to flower her and plant a new one in soil as a mother.
Here's the biggest of the kids
And I guess I'll just post all the rest that i took in a jumble here. they're all of the plants, In the final week of vegging. about a half week away from getting switched over to flower light cycle and nutrients.
I hope you guys Enjoy. I'll post more as things happen.
(oh, mother was larger, but too big for the light level, so i pruned her back a bunch like 2 days ago, when I moved the plants to the new room. she might still get tied down to get the canopy where I want it. we'll have to see)
WoW! Just plain old WOW ! 
You have been working yo butt off! Nice setup and equipment. I deal with a sloped ceiling too. When you get it all finished you will have great place to grow for a long time. Well done my friend!
You have been working yo butt off! Nice setup and equipment. I deal with a sloped ceiling too. When you get it all finished you will have great place to grow for a long time. Well done my friend!
