Carry on friend.Yeah. Because thats the ONLY factor to consider.
I never asked for your help, clown.
Mock what you dont understand. Its ok.
You have a nice life friend
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
Carry on friend.Yeah. Because thats the ONLY factor to consider.
I never asked for your help, clown.
Mock what you dont understand. Its ok.
You have a nice life friend
You can lose terpenes at room temp and if you add heat you lose more. We try to one up nature to get the very best from our plants. We also try to keep our terpenes intact as much as possible.Not sure I buy that. Maybe if you got in the 100s. In nature they get a lot more than 80. I dont think it damages them.
No ones TRYing to go over 80 but mother nature is a bitch.
I usually judge electronics by weight. Especially PC power supply.
The weight has no impact on performance what so ever.If you say so.
The idea is, quality parts weigh more. For example in pc power supplies its a sign of heavier guage wire.
100% high temperatures can cause airy buds and foxtails, especially with indica dominant strains that are less resistant to heat. It's not a myth.High temps what? Who claims that? Sounds like more stoner myth.
And there is no way you can connect bud density to potency.
^ he is rightWhere do you get this idea that quality equates to weight with lighting fixtures? This isn’t 1985.. welcome to 2020 where you have a PC that fits in your pocket. Lol I understand your a computer whisperer and can size one up just by looking at it but grow lights are totally different then a PC my man. You don’t lift a light and decide “ya it’s some good shit in there” haha you need to understand the lights cooling capabilities (or lack of), diode quality, spectrum of light, ppfd, par, footprint, micromoles per joule (efficacy) ... I promise you, you could go to the store and buy the biggest heaviest light they have and it still doesn’t mean it’s as efficient as the little light sitting next to it. I’m just trying to help you out my man, I’ve seen you scooting around the forums spitting everyone’s advice back in their face so this will be the only time I explain this to you. If you can’t grasp it after this, it’s up to you to do your own research.
High temps will make looser buds.
Budget LED is great.
but why worry about density? Loose airy buds like Haze have some of the best and longest highs.
I'm trying to find a way to lower my temps. It ran around 80-81F with only the 250 watt and now with adding the 2nd light I'll need to do something. A small ac unit maybeGood morning BB.
You caught me BB! I just made that myth up to confuse all the people wanting dense dope.
Next time you should say fake news or bro science. That’s the hip way of dismissing somebody without using reasoning.
Do you have a link to her study?You can lose terpenes at room temp and if you add heat you lose more. We try to one up nature to get the very best from our plants. We also try to keep our terpenes intact as much as possible.
Esters are even more prone to volitalize at high heat. We are just starting to recognize how important esters are, especially for whole plant therapies.
Samantha Miller at Pure Annalytics is the source for this info. Not touting bro science here.
electronics :The weight has no impact on performance what so ever.
100% high temperatures can cause airy buds and foxtails, especially with indica dominant strains that are less resistant to heat. It's not a myth.
The reason some on here are a bit testy is because if you're giving advice to people on here and they don't follow up with doing their own research, you're setting them up for failure.
Thank you for trying to help though!
^ he is right
I'm trying to find a way to lower my temps. It ran around 80-81F with only the 250 watt and now with adding the 2nd light I'll need to do something. A small ac unit maybe
I also use a budget 250. But in a 4x4. With the exhaust fan on 24/7 it was getting into the mid 80's on the last tent run. The budget light is nice and cool. No way I could do it with a HPS. Outside it is 103 right now.The weight has no impact on performance what so ever.
100% high temperatures can cause airy buds and foxtails, especially with indica dominant strains that are less resistant to heat. It's not a myth.
The reason some on here are a bit testy is because if you're giving advice to people on here and they don't follow up with doing their own research, you're setting them up for failure.
Thank you for trying to help though!
^ he is right
I'm trying to find a way to lower my temps. It ran around 80-81F with only the 250 watt and now with adding the 2nd light I'll need to do something. A small ac unit maybe
Seems a bit sensitive, my friend. All he tried to do was correct you so that people don't get mislead. It's also to help you as the weight really doesn't have anything to do with the quality of the light, budgetLED make great lights and Barney's strains are quality. I understand gauge wire, but that isn't the topic here.electronics :
Im not going to argue with you. I make one throw away comment about a minor tip that helps me and I get mocked and bullied by those who dont understand.
If you dont underatand what wire "guage" is or how having heavier guage wire in a PC power supply is a massive difference over garbage/cheap wire, then I dont care to discuss it with you.
Heat:
And after doing some research, there are others with the same thoery about heat/density. But you havw to get closer to 100 to run into that. 80-85 isnt an issue. It might not be ideal. But its not "High"
Lastly. There is difference between a throw away comment like. "I look for weight in electronics" and actual advice, "do XYZ to fix problems"
If people did their own research they wouldnt be here. I wpuls argue you set yourself up for failure. Dont try and put that on me.
Please dont respond because I am frustrated. Feeling attacked and ready to ignore more people.
I already blocked and reported mr insulting.
Yea it gets hot here as well.I also use a budget 250. But in a 4x4. With the exhaust fan on 24/7 it was getting into the mid 80's on the last tent run. The budget light is nice and cool. No way I could do it with a HPS. Outside it is 103 right now.
But back to bud density... genetics are most important, then selection, then environment/culture.
To me density is not really an issue, I don't sell any weed nor feel the need to impress buyers with dense nugs. I've come to the realization that the quality of the high is most important, then aroma, taste, bag appeal, etc...
I prefer big sativa flowers, easy to manicure and smoke.
Just done this mate, full plant ruined and when I opened the box to see a nice glaze of snow over them I wanted to cry but laughed .I haven't had any PM or anything. I did lose most of a plant to bud rot but that was during drying and that shouldn't happen again.
Lots and lots of circulation.
Were they grown under the HID? I see they're showing some foxtails and cupping. Do you know what temps during flower?Back to the topic of this thread. I just switched from hid to a budget led not long ago do can't really give my opinion yet. I did do my research before buying they are quality built. I don't want a light from China I don't want to support a comunist country the oppresses its people. I have grown a few Barney's farm stains Al have been good solid genetics. Quick pic from my last grow Barney's farm gorilla Zkittlez.
Nice! I tried using an HPS on my 2nd grow, granted it wasn't enough wattage. It was just too much heat for my closet setup. I really like the budgetLED lights so far, especially the new series 3+ full specs because they let you switch between spectrums. I only run one tent so it's perfect for me.Ya 1000 watt HPS so that's why your seeing some heat related issues. Averaged 12 oz per plant.
I've run Zkittlez and GelatOG from seedsman. No density but i'll likely rerun them with my added light and try to fine tune the environment to see if it improves.I would strongly suggest Royal Queen Seeds for sure, even with cfl lights I ended up with dense pebbles.
Seedsmans own genetics too are bang on.
As for mould, there's no one out there that suffers from mould more than me trust!
I'm currently dealing with mould every grow now, I find the denser the buds the more I get and why even with 50%?, pretty positive the reason being is small dead leaves dying back into the bud then causing problems.
Anyway though yeah look in my journals there's some good examples from RQS.
I'll check them out. I'm pretty limited to only what seedsman carries, I've never used any other website. I'm in the US.Dr Seeeds and new420guy are proven solid in my book. Of course Barney’s Farm and bomb genetics as well.. weedseedexpress is a new breeder I’m trying on this next grow, their strain list is awesome and reviews are promising.
I am in the U.S. as well friend. New420guy is in Nevada, Dr seeds you can order online from Canada to the U.S. Weedseedexpress is based out of the Netherlands but they ship to the U.S. as well (took two weeks to get my order from them). I go through “the vault” seed bank to get access to Barney’s, Bomb, and all the other U.K. banks that don’t normally ship to the U.S ... just to give you an idea if your in the states there’s plenty of options.I'll check them out. I'm pretty limited to only what seedsman carries, I've never used any other website. I'm in the US.
I have grown there cheese smaller yield but very tasty. I have there blue cheese going now. I am a sucker for a good cheese strain. I also have in-stock but not grown yet from Barney's triple cheese, violator kush and critical Kush.Is the gorilla zkittlez the only strain you've run from them? I'm gonna pop either the wedding cake or purple punch as soon as they get here
I’m sorry did I catch that correctly? You judge electronics by weight? ... fuck quality components huh? Couple wiggles of the box and your a guru! I feel like your doing this on purpose now. Hahah
Im not going to argue with you.
I make one throw away comment
I get mocked and bullied by those who dont understand.
If you dont underatand what wire "guage" is or how having heavier guage wire in a PC power supply is a massive difference over garbage/cheap wire, then I dont care to discuss it with you.
And after doing some research
If people did their own research they wouldnt be here.
Please dont respond because I am frustrated. Feeling attacked and ready to ignore more people.
I already blocked and reported mr insulting.
Oh, and in case you were wondering: The reason I decided to remove your "male cannabis plants do not produce flowers" quote from my .SIG wasn't that I was asked to