High Brix Kit 4 Strains QB 288 & 132s With EOD & Emerson Lights In A 6x4 Sealed Room

[Highbrixbotany2018]

AC kicks on at 90. Set at 86. Humidity dropped from 75-73 in 2 sec. the kilowatt puck is all lights, fans, CO2. Not on it are AC, airpump, humidifiers. I’ll put the whole room on one after harvest.

 

[Highbrixbotany2018]

Roots everywhere . Humidity hits 58 before it gets to 86. Def need another dehumidifier. Or gotta change something. Probably need a swamp cooler. AC dehumidifys to lower temp.

 

[Highbrixbotany2018]

Basic design I can put a round fogger in a self watering dog bowl and attach a water jug . Put the bow in a bucket and add a tube

 

[Highbrixbotany2018]

Bought a 5 head fogger and a pond float from a hydro company. 10gal bucket and a tube. Problem solved

 

[Highbrixbotany2018]

With the 3rd humidifier running it drops from 90f to 86f with the AC on only dropping humidity from 79 to 68. It returns to 79 within 2 minutes.

 

[Highbrixbotany2018]

Interestingly the IR of the leaves go down to 81 when the AC is on. 84-86 any other time.

 

[Highbrixbotany2018]

And with the humidity back up the leaves have untacoed

 

[Highbrixbotany2018]

88f 84rh!!!!!! Problem fixed. So many problems form last grow were from this and I didn’t believe it. I’d lay money down that most people’s grows are out of vpd and the deficiency they are chancing or problem they have is from that.

 

[Highbrixbotany2018]

Growing!!!!! VPD!!!!

 

[Highbrixbotany2018]

I’m buying a cloth net this week to flatten them all
Out like a table.

 

[Highbrixbotany2018]

What would happen if I put destress or high brix foliar spray into the ultra sonic humidifier? It would work right. Thoughts? Just on those days.

 

[Highbrixbotany2018]

Maybe like 8oz

 

[Highbrixbotany2018]

Went through 1st 20lb of CO2

 

[Amy Gardner]

What would happen if I put destress or high brix foliar spray into the ultra sonic humidifier? It would work right. Thoughts? Just on those days.

Hbb, I would not advise this. Most sonic humidifiers explicitly say they are not for use with essential oils, and while the Brix and Destress foliars aren’t oils, I still think it would be inadvisable to put them through one of those devices. Plus, it would be a colossal waste! IMO. I use the tiniest amounts at a time when I mix foliars. 100-300ml of diluted mix will do quite a few plants. Putting it in one of those would just put it all over everything - I’m not sure I’d want Brix residue all over my tent .

So hey, I can’t really see your pics without loading them into another page, which sometimes doesn’t work and it gets fiddly. Is it possible for you to click the “full size” button for the attachments? That way they will land in the post as full size pics and be easy for everyone to see. I wonder if they don’t look a little pale, but that could be the lighting.

88f 84rh!!!!!! Problem fixed. So many problems form last grow were from this and I didn’t believe it. I’d lay money down that most people’s grows are out of vpd and the deficiency they are chancing or problem they have is from that.

Wait, are you saying that 88ºF and 84% is where your conditions are at? Or have you ‘corrected’ from there? I’m a bit unclear, mebbe I should go back and read again.

 

[Highbrixbotany2018]

I agree about the ultrasonic. After thinking I thought about it just being in the humidity. Yes you read right 88-90f 75-80rh with CO2 at 1200 IR of the leaf 81-86 room is flexing VPD. How do I make the pic full sized?. Some leaves are a little light the humidity was too low.

Hbb, I would not advise this. Most sonic humidifiers explicitly say they are not for use with essential oils, and while the Brix and Destress foliars aren’t oils, I still think it would be inadvisable to put them through one of those devices. Plus, it would be a colossal waste! IMO. I use the tiniest amounts at a time when I mix foliars. 100-300ml of diluted mix will do quite a few plants. Putting it in one of those would just put it all over everything - I’m not sure I’d want Brix residue all over my tent .

So hey, I can’t really see your pics without loading them into another page, which sometimes doesn’t work and it gets fiddly. Is it possible for you to click the “full size” button for the attachments? That way they will land in the post as full size pics and be easy for everyone to see. I wonder if they don’t look a little pale, but that could be the lighting.


Wait, are you saying that 88ºF and 84% is where your conditions are at? Or have you ‘corrected’ from there? I’m a bit unclear, mebbe I should go back and read again.

 

[Amy Gardner]

Ok i get what you’re up to now

How do I make the pic full sized?

When you upload the attachments, once theyre all uploaded you will see a “full size” button at the top adn also next to each pic. You can either do them one by one, or all at once.

It looks like this:

Hope that helps

 

[Highbrixbotany2018]

 

[Highbrixbotany2018]

I’m going to move the drivers the outside of the room. That will remove some heat.

 

[Highbrixbotany2018]

Scrog net, another oscillating fan, uppotted the only 5gal to 10. Transplant
Solution. Put the drivers out of the tent. And
Flipped to 12/12. Big day.
With the lights dimmed, drivers out the boards are only 90f. Before closer to 100. And drivers were at 110. Drivers are
Cooler also out of the room. Room stays 84-86
A lot longer .

 

[Highbrixbotany2018]

This round. What I’ve found is with tons of photons the plant doesn’t feel the need for huge leaves are necessary. So I wonder if it makes sense to turn them down and back up. Every other week.