Diatomacious
Well-Known Member
She was looking pretty rough but she seems to have bounced right back for you. 
Mars-Hydro DWC 1 Plant 4x4 Scrog
- Thread starter Tokin Roll
- Start date
-
- Tags
- dwc 10 gallon mar hydro scrog
Dusty Kiefers
Well-Known Member
Happy fourth brother.
Congratulations on that new title.
Looks good
Congratulations on that new title.
Looks good
- Thread starter
- #263
Happy forth to you also brother.
Stay safe, and enjoy.
Stay safe, and enjoy.
- Thread starter
- #264
Good Morning all,
I hope everyone had a enjoyable 4th of July weekend? I did and the weather was perfect.
Today, I am getting my water ready for a solution change tonight when the light come on.
Until, then here are some current images of Impatience from the past few days.
A little later today, I would connect the chilling probe to a sacrificial bucket.
So more to come.
That's all folks,
Tok..
I hope everyone had a enjoyable 4th of July weekend? I did and the weather was perfect.
Today, I am getting my water ready for a solution change tonight when the light come on.
Until, then here are some current images of Impatience from the past few days.
A little later today, I would connect the chilling probe to a sacrificial bucket.
So more to come.
That's all folks,
Tok..
- Thread starter
- #265
I drill the hole in reverse for a smoother cut, and installed the probe onto a 6.5 gallon bucket for a 6 hour water test.
After the water test I will make all the connection and test its cooling ability over the next couple day.
This test is being done with a round bucket.
What's all for now folks. Testing, testing, 1,2,3.
Have a great day,
Tok..
After the water test I will make all the connection and test its cooling ability over the next couple day.
This test is being done with a round bucket.
What's all for now folks. Testing, testing, 1,2,3.
Have a great day,
Tok..
- Thread starter
- #266
Good Afternoon All,
Time too bring everyone up to speed.
I did a solution change on Tuesday using the following nutrients in this order. It normally takes me about 6 hours to properly mix and dilute everything, before I ph the solution.
After these nutrients were added in total the ph 5.8
Nutrient ppm's ph
10m/l silica 0 ? may of increased
10 m/l cal-mag 300
10 m/l part A 355
20 m/l part B 650 5.8
________________________________________________________________________________________________
Ph increased after adding these.
4 m/l rapid root 0 - .2
10 m/l Hydro-gaurd 0 - .1
Total 4 Gallons of solution 650 adjusted to 5.8
Here are some current images.
Okay, moving on to the chiller control box.
I will change the outlet mounting to the inside of the box.
That's all folks.
Tok..
Time too bring everyone up to speed.
I did a solution change on Tuesday using the following nutrients in this order. It normally takes me about 6 hours to properly mix and dilute everything, before I ph the solution.
After these nutrients were added in total the ph 5.8
Nutrient ppm's ph
10m/l silica 0 ? may of increased
10 m/l cal-mag 300
10 m/l part A 355
20 m/l part B 650 5.8
________________________________________________________________________________________________
Ph increased after adding these.
4 m/l rapid root 0 - .2
10 m/l Hydro-gaurd 0 - .1
Total 4 Gallons of solution 650 adjusted to 5.8
Here are some current images.
Okay, moving on to the chiller control box.
I will change the outlet mounting to the inside of the box.
That's all folks.
Tok..
Smokey0418
Well-Known Member
That’s great, would you have volume of water?
- Thread starter
- #268
Thanks for stopping by @Smokey0418
For the set up I am running, it will chill up to10 gallons of water 6-8 degrees from the rooms ambient temperature.
There are some good YouTube video's on the Ink Bird ITC-1000 Microcomputer Temperature Controller. If you are interested you should check them out.
edit: Beer makers love them
For the set up I am running, it will chill up to10 gallons of water 6-8 degrees from the rooms ambient temperature.
There are some good YouTube video's on the Ink Bird ITC-1000 Microcomputer Temperature Controller. If you are interested you should check them out.
edit: Beer makers love them
Smokey0418
Well-Known Member
I have a few items , the aquarium temp controller, and humidity and temp one, all wifi, there on the list for install. Nothing for them to control ,yet.
Paul Squiggle
Well-Known Member
Howdy do mate.Update part 4
Images taken on June 14
Time to put her under the net.
The branches were too difficult to been by hand, so I taped up a pair of pliers and went to work.
If you look at the center of the plant you will see the bend branch.
Using a pair of pliers can crush a branch if your not careful.
The tape shows were I got a little zealous with the bend. She will be fine.
One more part to update.
I take it all back what i said in the journal of the month page. I have been following your journal. I'm only 4 pages behind.. that's the only problem about our beloved green plant. You can't fekin remember what you did yesterday
Nice write up, and the install is looking nice and clean so far 
Nets filling up beautifully as well!
Nets filling up beautifully as well!
- Thread starter
- #272
I'm back.
Good Morning 420 Magazine,
Short brief update on Impatience and the ITC-1000 thermal computer tests.
First, Impatience has been moving right along sucking up the nutrients and water; holding a steady ph of 5.8. Dropping about 60 ppm's or so a day. Her current feed is around 740 ppm's at solution change, and she loving it. I will raise the feed again at solution change. Here she is.
I also have a HSO Three Blue Kings in the new tent and light until I can move it to the flower tent.
This will be epic if all works out well.
Here is the ITC-1000 being tested.
That's all for now. I got too go cut the grass.
Until I can play later, Stay safe, and grow well my friends,
Tok..
Good Morning 420 Magazine,
Short brief update on Impatience and the ITC-1000 thermal computer tests.
First, Impatience has been moving right along sucking up the nutrients and water; holding a steady ph of 5.8. Dropping about 60 ppm's or so a day. Her current feed is around 740 ppm's at solution change, and she loving it. I will raise the feed again at solution change. Here she is.
I also have a HSO Three Blue Kings in the new tent and light until I can move it to the flower tent.
This will be epic if all works out well.
Here is the ITC-1000 being tested.
That's all for now. I got too go cut the grass.
Until I can play later, Stay safe, and grow well my friends,
Tok..
- Thread starter
- #273
Good Morning 420 Magazine.
This update comes with three parts.
Starting with Impatience, well she is budding up real nice and sucking down the nutrients. The other day I bumped up her feed to 840 ppm's at 5.8 and the next day she was at 760 ppm's with a steady ph of 5.8.
The next part is my testing of a Ink Bird thermal controller pass with flying color. Judging how far down in the bucket the sensor should go is going to be key too make this work. Here are some test images.
The controller will be in the bucket of my next grow.
The last part is Three Blue Kings. She has been germinated and is currently a seedling.
That's all folk's
This update comes with three parts.
Starting with Impatience, well she is budding up real nice and sucking down the nutrients. The other day I bumped up her feed to 840 ppm's at 5.8 and the next day she was at 760 ppm's with a steady ph of 5.8.
The next part is my testing of a Ink Bird thermal controller pass with flying color. Judging how far down in the bucket the sensor should go is going to be key too make this work. Here are some test images.
The controller will be in the bucket of my next grow.
The last part is Three Blue Kings. She has been germinated and is currently a seedling.
That's all folk's
- Thread starter
- #274
I'm back.
I went down to Winchester VA. for the weekend to visit sister and brother-in-law. Beautiful weekend, some rain, and Friday was a scorcher, but temperatures Saturday and Sunday were very nice.
Anyways, I had my son take care of my plants while I was gone for four days, and I am glad to say they are all still alive. My son knows nothing about growing, just smoking.
First up is Impatience followed by Three Blue Kings.
Impatience has been moving right along with her feed up to 900 ppm's
Stay safe, and grow well my friends,
Tok..
Next is Three Blue Kings.
She is only on 200 ppm's of cal-mag, but next solution change I will start introducing half-strength Blue Planet Nutrients. I will be a couple days until change.
So here she is.
More to come in a couple days.
That's all folk's.
I went down to Winchester VA. for the weekend to visit sister and brother-in-law. Beautiful weekend, some rain, and Friday was a scorcher, but temperatures Saturday and Sunday were very nice.
Anyways, I had my son take care of my plants while I was gone for four days, and I am glad to say they are all still alive. My son knows nothing about growing, just smoking.
First up is Impatience followed by Three Blue Kings.
Impatience has been moving right along with her feed up to 900 ppm's
Stay safe, and grow well my friends,
Tok..
Next is Three Blue Kings.
She is only on 200 ppm's of cal-mag, but next solution change I will start introducing half-strength Blue Planet Nutrients. I will be a couple days until change.
So here she is.
More to come in a couple days.
That's all folk's.
- Thread starter
- #275
Some what of and update.
Impatience is just like her name building buds.
Three Blue Kings is coming along very nicely. Currently about the second week of veg and getting ready for a solution change and start using Blue Plant Nutrients.
I will be feeding her 5 ml of Micro, Grow, and Bloom (per gallon), and will get back to you as far as cal-mag goes. If you are not aware on a three part regiment micro should be first one in solution. Kind of like adding cal-mag before grow in a two part.
I will be adding the sea weed flakes also. This is all new to me because I normally just keep it simple, but you never know I'll give it a go and see where it takes me. Images coming soon.
Tok..
Impatience is just like her name building buds.
Three Blue Kings is coming along very nicely. Currently about the second week of veg and getting ready for a solution change and start using Blue Plant Nutrients.
I will be feeding her 5 ml of Micro, Grow, and Bloom (per gallon), and will get back to you as far as cal-mag goes. If you are not aware on a three part regiment micro should be first one in solution. Kind of like adding cal-mag before grow in a two part.
I will be adding the sea weed flakes also. This is all new to me because I normally just keep it simple, but you never know I'll give it a go and see where it takes me. Images coming soon.
Tok..
- Thread starter
- #276
Good Morning all,
It's that time again for a current update.
Impatience is still fattening up her buds, smelling very floral aroma, and she is getting very sticky. If you have not try to grow Green Crack you should give it a go. She easy to grow and a pleasure to look at, try it you'll like it.
Her current feed is at 980 ppm's, ph'd at 6.0.
Impatience replacement will be Three Blue Kings. She is two weeks old and waiting in the wings.
Solution change today, so read will be posted a little later, I have yard work to do again. Also, this will be the second solution change with Blue Planet Nutrient. More to come.
That's all folk's
Stay safe and grow well my friend,
Tok..
It's that time again for a current update.
Impatience is still fattening up her buds, smelling very floral aroma, and she is getting very sticky. If you have not try to grow Green Crack you should give it a go. She easy to grow and a pleasure to look at, try it you'll like it.
Her current feed is at 980 ppm's, ph'd at 6.0.
Impatience replacement will be Three Blue Kings. She is two weeks old and waiting in the wings.
Solution change today, so read will be posted a little later, I have yard work to do again. Also, this will be the second solution change with Blue Planet Nutrient. More to come.
That's all folk's
Stay safe and grow well my friend,
Tok..
- Thread starter
- #277
Update: Three Blue Kings
Here are the numbers for the solution change using @Blue Planet Nutrients in DWC.
I mix 3 gallons of solution, these number are per gallon
Amount/per gallon PPM's
Mirco 7.5 ml x 3 = 22.5 ml .400
Grow 7.5 ml x 3 =22.5 ml .620
Bloom 7.5 ml x 3 =22.5 ml .810
Seaweed 1/2 scoop x 3 = 1 1/2 scoop 0
Total .810
PH'd to 5.8
I am currently at the start of week three, on the feed schedule.
The only other thing I added is 10 ml of Hydro-Guard.
Tok..
Here are the numbers for the solution change using @Blue Planet Nutrients in DWC.
I mix 3 gallons of solution, these number are per gallon
Amount/per gallon PPM's
Mirco 7.5 ml x 3 = 22.5 ml .400
Grow 7.5 ml x 3 =22.5 ml .620
Bloom 7.5 ml x 3 =22.5 ml .810
Seaweed 1/2 scoop x 3 = 1 1/2 scoop 0
Total .810
PH'd to 5.8
I am currently at the start of week three, on the feed schedule.
The only other thing I added is 10 ml of Hydro-Guard.
Tok..
Dragoond2
Well-Known Member
So I'm caught up some on what's going on. Lol
I mess up the planing of my last grow had a mix of autos and photos in one tent. I'm sure you can guess what happened, photos were getting like 3 feet tall while the autos were still weeks away from being done.
So I tried my hand at cloning in water with rooting powder. Anyway long story short I now have 6 plants one in a DWC just wanted to try something while still learning the basics.
Pic couple days ago all are now in 3 gallon pot expect the dwc of course. It's been a while and I have added more of my nute solution probably need to change it soon. Lol any advice?
Using tap water with mega crop .5ec and ph’d to 5.5-6.0
I mess up the planing of my last grow had a mix of autos and photos in one tent. I'm sure you can guess what happened, photos were getting like 3 feet tall while the autos were still weeks away from being done.
So I tried my hand at cloning in water with rooting powder. Anyway long story short I now have 6 plants one in a DWC just wanted to try something while still learning the basics.
Pic couple days ago all are now in 3 gallon pot expect the dwc of course. It's been a while and I have added more of my nute solution probably need to change it soon. Lol any advice?
Using tap water with mega crop .5ec and ph’d to 5.5-6.0
- Thread starter
- #279
Maybe check this out to start on watering. Nicely done.
I need more on the DWC to offer any help.
Ping me if you have a question and I'm not around.
Tok..
I need more on the DWC to offer any help.
Ping me if you have a question and I'm not around.
Tok..
- Thread starter
- #280
Update on Impatience and the Three Blue Kings.
Impatience did not become a large plant, but she is fattening up some nice buds anyways. Feed is currently at 890 ppm's and she taking it in stride. I think if I would of let her recop longer after the broad mites issues, she would of gotten larger, but I spend to much time on her already and it's time to move on. I still expect a decent smoke because she smells great and very sticky.
The images are from 7-26 to 8-3
I will do another update shortly for TBK's.
Impatience did not become a large plant, but she is fattening up some nice buds anyways. Feed is currently at 890 ppm's and she taking it in stride. I think if I would of let her recop longer after the broad mites issues, she would of gotten larger, but I spend to much time on her already and it's time to move on. I still expect a decent smoke because she smells great and very sticky.
The images are from 7-26 to 8-3
I will do another update shortly for TBK's.
Similar threads
