PK Perpetual Grow Journal 2020

2020-10-16 19.37.31.jpg
This is the unknown clone that had roots. It's been about a week and i've changed the res water.

She got 5g of water in the res and the pump is feeding her every two hours for one hour. The resv has 1.2ml of hydrozyme and 0.05g of MC
Ph 6.0
resv temp 71.5f
This is the Gorilla glue that had the bad leave. The tube on this mesh pot was a bit long and was spitting water out of the res. I've adjusted the tube by shortening it and making it go trough some more holes that are on the mesh pot. No more spitting.

Currently she is in a wool cube with no roots showing.
5 gallons of water with 1.2 ml of hydrozyme.
PH 6.0
temp 72f
2020-10-16 19.37.36.jpg
2020-10-16 19.41.08.jpg
I do like to point out that i made a new jar of ph adjuster in a glass that has a lid. I've calibrated my ph pen and since it is sealed in a glass jar that i should be good for few rounds.

This two are from the gorilla glue. They are currently under 24h light with humidity at 80% and temps around 85f.

I need to make sure i've got something going encase the other two clones don't make it. lol!!
So far, these two are doing great. I cut them last week and they were at the bottom of all the branches and wasn't getting much. I don't even notice any flower development on them so i thought cloning it would do better.
 
Oct 23rd | Update on the hydro clones
2020-10-23 09.15.25.jpg
Gorilla Glue
Ph
6.13
res
10g of water temp 19c/66.2f
Hydrozyme: 1.2ml
Added Nutrition Zero

Just as a reminder, she is in a wool cube and I have not removed the clay pebbles to see if there are roots outside of the cube wool or not. wondering if i should?:hmmmm:

I don't see any roots in the reservoir yet and she is turning yellower every day. Now the 2nd big leave is dropping.

After adjusting the ph in the morning, I also drop one tea glass of res water above the clay pebbles to ensure water is getting to the wool cube.

I'm not giving up on it yet. The mother plant was in veg mode before i cloned it. I would of assumed it would of rooted faster and gotten bigger.
Unknown Clone
Ph
6.18
res
10g of water temp 19c/66.2f
Hydrozyme: 1.2ml
Added Nutrition Mega Crop 0.05g

Just as a reminder, she is does have roots but nothing out into the reservoir yet.

She was also taken from the mother plant that was in veg mode. She seems hungry to me and i say this due to the light green leaves. Tomorrow will be third week that both clones res water will be changed.

Currently the pump for both plants turns on for 1 hour every 8 hours. I've been adjust this constantly and since i've got two other clones in a cube wool i can see that the cube wool holds water for about 8 hours before it seems dry. Due to this i changed the pump feeding cycle to be every eight hours.

2020-10-23 09.15.28.jpg
 
Update on unknown clones
2020-10-24 06.23.18.jpg
2020-10-24 06.23.26.jpg
2020-10-24 06.23.37.jpg
2020-10-24 06.23.46.jpg
Here are the main clones that was taken from the last batch that burned. This time around the outside temps are falling below 5c and i've got a little heater in the room with two fans running. This allows me to keep the temps at around 78f with 38% of humidity. Currently on 4g of mega crop. She is taking it with no problem and getting thicker.

Last time it was early in stages of flower where i asked if anyone knew what type of strain this is. Some said Sativa but couldn't narrow it down. with the nugs being grown, does anyone happen to know what kind this is?
 
Thanks Sauga, how you been bro
 
by the way, Congrats on the new job
 
how bad is it if humidity drops at 21 with temp of 74f? girls are sleeping
 
i've got the window open and the fans are running. Turned the heater off. hopefully that would do the job.
 

Thanks for this Sauga, its been a hectic couple days trying to get things right. Some burned leaves from the lower side but i think we are going back to yellow zone on the graph
 
at the moment i am holding it at 62f with 36% humidity. I've got fans running, and a tub of water with rags hanging from it so the fans can blow at it. The weather is too cold and humidity levels are low. Heater makes that humidity go even lower.
suggustions?
 
Sexy pictures of the mysterious plant that is in flower
2020-10-20 10.08.16-1.jpg
2020-10-24 06.23.18.jpg
2020-10-24 06.23.26.jpg
2020-10-24 06.23.37.jpg
2020-10-27 14.55.47-1.jpg
2020-10-27 14.55.47 HDR.jpg
2020-10-27 14.55.54-1.jpg
2020-10-27 14.56.02-1.jpg
2020-10-27 14.56.03 HDR.jpg
2020-10-27 14.56.07.jpg
 
I was told before these girls here are all hybrid sativas.
The aroma is very light still. I'm not sure how to describe the smell lol!
any pointers?
 
Back
Top Bottom