420 Magazine Background

GreenThunder 4x4 Tent

GreenThunder

Well-Known Member
My tent was advertised as 4x4 and actually measures 4 feet and 7 inches on each side. Is this normal or did I get bonus space?

My first grow was a test and the mystery plant moved in just before she began to flower. She grew before I found a very helpful forum so everything was wrong. She had a small yield but I was hooked. My next batch was 3 plants.... 2 bag seeds and an auto. All were treated/fed the same, which I've since learned should not work. The auto, naturally, yielded half that of the others but it was sweet!!
The next batch was 2 clones from the previous batch, the sour diesel was just too good and I didn't have another seed. This batch was my first scrog and a great success!
Finally, my last batch was planned to be 4 and ended up to be 5 which is too many in that size space. I've set a limit of 3... which brings us to the current batch!

There are 2 that were recently move into the tent from the closet. They began under the qb and will finish under the HPS.

I'll have to upload pics and include some details later... time to head into the salt mines :ciao:
 

TurboBucket

Photo of the Month: Jan 2019
Not necessarily no. I have two 4x4s neither of them are actually 4ft. They seem to design them to fit around the next size smaller table. My inside usable space measures 42" in one tent and 45" in the other. Of course mine are both cheap. Perhaps the more premium lines have different practices and give you a little extra room.
 

GreenThunder

Well-Known Member
I don't remember the brand but it seems sturdy. It's accessible from both ends, has 'cinchable' holes for fans and power cords as well as a mesh window (down low, for air flow) and a vinyl window for peeking (both with velcro covers)

20180718_220547.jpg


I had hoped to be able to keep a twin bed in the room for when my mom visits but she's stuck with the couch.

Inside the tent is a 1000 HPS on an adjustable ballast with a 6" inline for cooling and another for exhaust with a carbon filter.

PHOTO_20180718_223956.jpg


Here's some shots of what's currently inside

PHOTO_20180714_210911.jpg
PHOTO_20180714_210919.jpg
PHOTO_20180718_200948.jpg
20180718_205416.jpg
PHOTO_20180715_221925.jpg
 

Bigjake8

Well-Known Member
Hey you got part of my tent my 4x4 is actually only 39x39 but it was in a plain box that said ...tent... on it but knock on wood the zippers work good and there's no light leak with it so it's good material just couldn't read a tape measure
Looks good in hete
 

GreenThunder

Well-Known Member
Hey you got part of my tent my 4x4 is actually only 39x39 but it was in a plain box that said ...tent... on it but knock on wood the zippers work good and there's no light leak with it so it's good material just couldn't read a tape measure
Looks good in hete
Sounds more like a 3x3 with a few extra inches. I'd have been more upset if it was smaller than expected rather than bigger. I almost wish we could trade. Almost ;)
 

GreenThunder

Well-Known Member
The remaining occupants...

Psycho clone, about 2 weeks or so until harvest

PHOTO_20180825_092306.jpg



And Laughing Buddha, about 30 days in flower

PHOTO_20180825_092316.jpg


This girl wants to be TALLL!! It’s been a challenge to keep her from reaching the light. Scrog is a must for this one!! I’ve tied her this way and that, even super cropped a branch more than 90° and the end just popped back up! I think (hope) the stretch is over and she’ll be content to plump up

20180823_220036.jpg
 

GreenThunder

Well-Known Member
Decided not to wait the 10 days and started harvesting Psycho clone Agnes. Yesterday we trimmed 630g buds and 87g popcorn. Today I trimmed another 151g buds and 68g popcorn.

PHOTO_20180902_100234.jpg
PHOTO_20180902_100330.jpg



Hubby admiring one of the trimmed colas

20180902_230914.jpg



That's my shiny face behind Agnes
PHOTO_20180902_210853.jpg



We had to cut a bunch of branches before we could extract her from the scrog and the tent. This is what she looked like after removing 630g!

PHOTO_20180902_210552.jpg
 

Advocate420

Well-Known Member
I've been making dry rub kief with my trim and larf. My screen is 125 microns and I want to get a replacement before it's needed (unusual preplanning on my part) But I'm confused by the numbers.... is 220 a finer screen than 150 or do I have it backward?
220 is typical work bag and the largest. 25 is finest
 
Top Bottom